auszookers.com • View topic

Board index » Shift It And Find It » I Want it I Want it I want it

Rooted 1L

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Benchai

Joined: Fri Aug 06, 2010 12:18 pm
Posts: 378
Location: Beaudesert

Posted: Sun Jul 29, 2012 1:04 pm

Looking for a buggered or unwanted F10A to fabricate aircon compressor brackets and pulley. Some might that any F10A is buggered, and that I have rocks in my head for considering putting aircon on one, be that as it may if you have something I could use that would be grousse :peaceout:

_________________
www.bulldogtrimming.com

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Sun Jul 29, 2012 5:08 pm

Don't have an engine spare, but I mounted a compressor (for air, not air con) on the exhaust side of engine. Down low at the front of the block there's 2 threaded unused holes (m8 I think) and I removed a couple of exhaust studs and fitted longer ones, bolt up manifold then bolt bracket to the back of the nut. And made a custom bracket to suit mounting points.

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Sun Jul 29, 2012 6:06 pm

I'll endevour to check through my garden shed tomorrow afternoon (seriously send me a reminder PM if I don't let you know) but I should have a suitable F8 (which externally have an identical block to an F10.

And just for novelty value, I know someone that bought a brand new 1L tintop back in the early 80's, and it came with air con

_________________
Clearance Hole Technology

sideways

az supporter

Joined: Fri Oct 29, 2010 1:53 pm
Posts: 5935
Location: Northcliffe, W.A.
Vehicle: LJs, Sierra, Jimny, Swift.

Posted: Mon Jul 30, 2012 9:19 am

Highway-Star wrote:

I'll endevour to check through my garden shed tomorrow afternoon (seriously send me a reminder PM if I don't let you know) but I should have a suitable F8 (which externally have an identical block to an F10.

The 3 (and from there, I assume all) F8as I have aren't drilled and tapped in the mounting location under the exhaust manifold so one may not be suitable/be a pain in the butt for what he wants.

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Mon Jul 30, 2012 7:29 pm

sideways wrote:

Highway-Star wrote:

The 3 (and from there, I assume all) F8as I have aren't drilled and tapped in the mounting location under the exhaust manifold so one may not be suitable/be a pain in the butt for what he wants.

Ah crap, really..... well I'll check for that tomorrow now....

_________________
Clearance Hole Technology

zooktastic

Joined: Mon May 11, 2009 11:30 pm
Posts: 941
Location: west sydney

Posted: Mon Jul 30, 2012 8:18 pm

i have a f10 near syd but that wouldnt be very practical

Benchai

Joined: Fri Aug 06, 2010 12:18 pm
Posts: 378
Location: Beaudesert

Posted: Mon Jul 30, 2012 9:28 pm

zooktastic wrote:

i have a f10 near syd but that wouldnt be very practical

Thanks anyway, but yes a bit far away

_________________
www.bulldogtrimming.com

jim_dover

az supporter

Joined: Fri Sep 11, 2009 11:30 pm
Posts: 286
Location: Brisbane
Vehicle: '84 LWB 1LTR

Posted: Thu Aug 16, 2012 8:42 am

Hay mate I got a f10 sitting around the side of the shed no head or manifolds but yours if you want it.

Page 1 of 1

[ 8 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: Google [Bot] and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum