[nemesis2187]

Located in Brisbane's south western suburbs (West Logan in other words)

I've pretty much taken the whole car apart and from it i am keeping the engine, loom, ecu, front pipe, heater and air con setup and possibly
(if its fits the sierra) the fuel tank everything else is for sale.

Not exactly sure what the parts are worth if it were a nissan or toyota i would, anyway if my price is to high just PM me a fair offer

Car had 130 000 on the clock


Complete Front diff with hubs, brakes and suspension $250

Complete Rear diff with hubs brakes and suspension $250

Complete Soft top $100 (rear window part has a few tears on the plastic)

Complete interior plastics including the whole dash $70 (will separate)

Auto box complete with shifter, boot surround, torque convertor and flex plate $250

Front seats $100

Rear seats $100 (or both front and rear $150)

Front grill $50

Head lights $120 for both

Tail lights $70 for both (one has crack on it but ok)

Tailgate $60

Bonnet $80

Tow bar $50

Radiator $50

Front bar with reo - $50

Rear bar with reo - $50

Wheels x5 (tyres are stuffed) $100

Steering rack and pinion $80

I missed other bits and pieces as it was a complete running car so if its not listed and your after a part just ask me

Here are some pics

[nemesis2187]

more pics

[Kerrod]

What speed is the auto?

[Teracis]

Would you separate the hubs, spindles, locking and drive flanges from the diffs? All good if you're trying to sell them whole, I just don't need anything else off one.

[tuffcoily]

I bought one for the engine and loom also tried to get rid of the rest of it here but wasn't much interest so sold the whole lot to Suzi Autos at spring wood he pays good money for these

[klutched]

Teracis wrote:

Would you separate the hubs, spindles, locking and drive flanges from the diffs? All good if you're trying to sell them whole, I just don't need anything else off one.

I'm getting the diffs But what are you after? The gearing or housing?

[Teracis]

Hey mate, I'm after the front spindles and hubs (iirc all vit spindles and hubs are the same, I could get you to measure for me ) the EDIT: I think the drive flanges come off the front, they don't have locking hubs do they, I can get you a photo of what I'm chasing but not until anto86 gets home from work (he just got a set) he is going to measure it all up now for me though so we can check them.

If I took some measurements and marked it up on the photo or pm them to you could you check if they are identical and tell me how much you want for these, if you're willing to part with them that is. It's so I can do a full float conversion on the rear of my sierra, regardless of whether the fronts are the same I definitely need the drive flanges from the rear.

Cheers
Tim

[tanshi]

teracis, you are after every thing from the end of the cv out.

drive flanges your after are from the front aswell.

[Teracis]

Thanks tanshi, I just had a phone call from tony to say the same thing, are you 100% that all vit front spindles are the same? I'd hate to end up with the wrong ones.

[tanshi]

not sure about GV spindles vs vitara ones.

[Teracis]

Damn, I'll get them measured then, I'll still need the drive flanges. Anyone else have an idea?

[cooperrat]

Would you post the seat belts and the plastic tunnel bit around the handbrake to 2107 and how much cheers john

[nemesis2187]

Kerrod wrote:

What speed is the auto?

3 Speed auto it has 1, 2, D

[nemesis2187]

Teracis wrote:

Would you separate the hubs, spindles, locking and drive flanges from the diffs? All good if you're trying to sell them whole, I just don't need anything else off one.

Klutched is picking up the rolla with the complete front and rear diffs

so once he has it be sure to ask him for what ur after

[nemesis2187]

cooperrat wrote:

Would you post the seat belts and the plastic tunnel bit around the handbrake to 2107 and how much cheers john

which seats belts u after front or rears? postage would be roughly $20 according to oz post, price on belts and plastic bit $50 plus post?

[Teracis]

Whoever is getting the front diff from this can you swing me a PM please, I'm still interested in the hubs, spindles and drive flanges.

Nemesis are you willing to part more yet?

[Gwagensteve]

nemesis2187 wrote:

Kerrod wrote:

What speed is the auto?

3 Speed auto it has 1, 2, D

That auto should be an AW-4. I'm not aware of any GV's with a three speed auto anywhere in the world. AW-4's only have PRND21 on the shift rail, 4th is engaged by button on the shifter.


PS how come the build plate has the constructor as CAMI Automotive, Canada on it????? Were GV"s really made in canada?

Steve

[tanshi]

maybe its like the softtop jimny being made in spain.

the softop GV could have been built in canada

[Gwagensteve]

Well, according to a VIN decoder based on the build plate, that car was indeed made in Canada.

Golly.

Steve.

[Bugsta]

I am afer just drive flanges if available.

[Teracis]

Bugsta wrote:

I am afer just drive flanges if available.

Already asked him for spindles hubs and drive flanges mate!

[nemesis2187]

Okay so i had abit more time on my hands so i completely stripped the GV... chucked the shell on the back of the ute to the scrappers and the rest has been left behind

Here are some more pics of other things left behind

[Aaron]

Hey mate ill take the drive flanges off the front if no one else does

[Teracis]

Aaron wrote:

Hey mate ill take the drive flanges off the front if no one else does

Too late bloke, already arranged

[Aaron]

Teracis wrote:

Aaron wrote:

Hey mate ill take the drive flanges off the front if no one else does

Too late bloke, already arranged

dang

[cooperrat]

cheers for tunnel and belts great service

[nemesis2187]

cooperrat wrote:

cheers for tunnel and belts great service

Shit that arrived quickly, i only posted it on friday.
Anyway good to hear that it arrived in one piece

[tanshi]

whoever gets the rear diff. if you only want the centre im happy to take the housing etc off ya.

[nemesis2187]

Front spindles, flanges and brakes - sold

tow bar - sold

radiator - sold

below are pics of whats left of diffs

come on people make an offer on this stuff!!

[swifty_ano]

Anyone know if the auto and t/case will suit my vitara?