auszookers.com • View topic - Sierra 1.3 vacuum leak ?

Board index » Talking About Stuff » Suzuki Talk

Sierra 1.3 vacuum leak ?

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Tue Nov 20, 2012 6:11 pm

Hey all I rebuilt my motor on the weekend!!! Is awsome untill the auto choke turns off! Haha has a vacuume leak somewhere... If I cover half the carby the engine idels like a gem!!!

On the weekend I am going to rip the carby and inlet manifold off again and new gaskets and make sure it's all sealed up properly.

Is there anywhere I should be looking that is common on a 1.3?

Also the gasket kit I got is for a g13a... Mines a g13b... Are the inlet manifolds different?

Cheers

zukmeista

Joined: Sun Mar 22, 2009 10:30 pm
Posts: 1273
Location: Whangarei,N.Z.

Posted: Tue Nov 20, 2012 6:18 pm

No, all gaskets should be the same assuming you are talking SOHC G13B, get some startyabastard or similar and spray around carby/intake, if revs pick up you have found your leak.

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Tue Nov 20, 2012 7:03 pm

the vacuum actuators can seize/leak, also

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Wed Nov 21, 2012 6:36 pm

cheers guys i will check this before i pull it apart again....i got new gaskets today....

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 475 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum