auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Sierra ute chop

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

jonozuk666

Joined: Sun Sep 23, 2012 5:19 pm
Posts: 47
Location: brisbane
Vehicle: 92 Sierra bars F&R locked

Posted: Fri Nov 30, 2012 10:48 am

Ive got a mate that just bought another soft top sierra. It has had the back cut off it he wants to know what is the best way to weld up the back to box in the cab. What have yous used to weld on. Or is there anything you can buy premade for it? Thanks

neofitou

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 1088
Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy

Posted: Fri Nov 30, 2012 10:56 am

Best way would be to get a tin top body, chop the back and roof off it and then weld it onto the cut off bits of soft top you have.
But then, if you have a good tin top just swap it for the hacked up bits of the soft top and call it done?

Marko_SJ

Joined: Tue Jan 17, 2012 1:40 am
Posts: 2979
Location: Darwin, NT
Vehicle: WT sierra, GU CRD

Posted: Fri Nov 30, 2012 12:08 pm

Maruti roof?

Best way to go IMO.

_________________
I love ZD30. :)

jonozuk666

Joined: Sun Sep 23, 2012 5:19 pm
Posts: 47
Location: brisbane
Vehicle: 92 Sierra bars F&R locked

Posted: Fri Nov 30, 2012 1:45 pm

the maruti roof does that just bolt on like a hard top?

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Fri Nov 30, 2012 2:10 pm

jonozuk666 wrote:

the maruti roof does that just bolt on like a hard top?

the roof itself, see pictures in this thread
viewtopic.php?f=5&t=36998

pezz

az supporter

Joined: Fri May 15, 2009 11:30 pm
Posts: 2108
Location: western vic
Vehicle: sj51

Posted: Fri Nov 30, 2012 3:53 pm

Mine is welded up using a hardtop doner body... i think it looks neat
not sure how painful it was to do as i didnt do it

neofitou

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 1088
Location: Melbourne
Vehicle: 00 Jimny, 63 Haffy

Posted: Fri Nov 30, 2012 3:59 pm

Maruti Roof wont work if the back of the car is missing.. you will still need to cap off the bottom of it.

got_bar_work

Joined: Sat May 15, 2010 8:30 pm
Posts: 2214
Location: Brisbane
Vehicle: SQ625

Posted: Fri Nov 30, 2012 5:43 pm

also i think a problem with welding a back on a car that was never designed for it is they flex to much and crack
Hell cap5ze had a flat wall welded in to cap off where the lwb tub was cut off and it cracked and it was still a ssoft top
Im thinking u would be better off making something that bolted onAt least it would allow some flex

Parry

Joined: Fri Oct 05, 2012 9:14 pm
Posts: 171
Location: Newcastle
Vehicle: Getting parts atm

Posted: Sat Dec 01, 2012 6:44 am

I'm doing a soft top cut, I'm just going to get a trailer place to fold up a bit of sheet so it has strength across top & look like the fold on a stock soft top & will brace across floor with bit of rhs or angle..

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sat Dec 01, 2012 6:53 pm

I used plywood, a rear window from a hard top and some alloy bracing.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 305 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum