It is currently Sat Aug 01, 2026 8:33 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Sun Jun 02, 2013 9:03 pm 
Reply with quote Top  
2012 jimny
whilst out pig shooting today, i was driving over a large log when i felt somethig "give".
anywho, once i was back on the black top, i noticed my steering wheel is pointing at 2 o'clock when going straight, the car still tracks straight and doesnt pull in any direction,
had a look at the panhard and tie rods, they look normal, what have i damaged?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Sun Jun 02, 2013 9:23 pm 
Reply with quote Top  
On a Sierra that is usually the drag link bent,
no idea if Jimmy is same

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Sun Jun 02, 2013 9:29 pm 
Reply with quote Top  
i would say so mate, i was thinking that or tie rod, i guess i will have to get her on the hoist tomorrow and have a proper look, pretty disappointed as it was hardly asking to much of it by negotiating the log.

 Profile  

Offline
User avatar

Joined: Wed May 22, 2013 10:07 pm
Posts: 150
Vehicle: vitara

Post Posted: Sun Jun 02, 2013 9:31 pm 
Reply with quote Top  
get a wheel elignment dont on it n tell them to have a look while they got it on the alignment machine
you need it done either way or u might ware ur tyres out

 Profile  

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Sun Jun 02, 2013 9:38 pm 
Reply with quote Top  
just had one done a fortnight ago when i got the new tires, i will be annoyed if ts out this far already after one wheeling trip.
will go over it and post the results tomorrow afternoon.
thanks for the help fellas.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Mon Jun 03, 2013 8:15 am 
Reply with quote Top  
If it is drag link, hopefully there's an after market upgrade, or a fix.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

 Profile  

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Mon Jun 03, 2013 9:07 am 
Reply with quote Top  
Panhard is bent and twisted.
Lucky I have an aftermarket one ready. Didn't take much to stuff the standard one.

 Profile  

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Mon Jun 03, 2013 6:02 pm 
Reply with quote Top  
the rear panhard is twisted a bit too, and the suspension is sagging on one corner already,
not happy, especially from what i class as normal wheeling.

 Profile  

Offline

Joined: Thu Oct 13, 2011 7:28 am
Posts: 332
Location: sunshine coast

Post Posted: Mon Jun 03, 2013 6:18 pm 
Reply with quote Top  
Yea those factory panhards are pretty weak, I bent mind a fair bit too

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Aug 12, 2006 11:30 pm
Posts: 6456
Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV

Post Posted: Mon Jun 03, 2013 6:37 pm 
Reply with quote Top  
Spot the problem, Jimny that was out with us at Morgan a while ago.

Image

_________________
Chop

Suzuki's are like Mogwai's, they multiply!

 Profile  

Offline
User avatar

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Post Posted: Mon Jun 03, 2013 6:48 pm 
Reply with quote Top  
his sway bar is still in... lol,
yeah mine is really bent and twisted, but its bent on the horizontal axis so it looks normal when i ducked my head under there, but once on the hoist, i got nder it and there is a big bow out in it, its also twisting,
the rear panhard is straight, but the piant has peeled off in spirals, suggesting its twisting to.
the suspension im not happy with,
once funds permit, i will dump it in the bin and just get OME.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 69 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours