| Author |
Message |
carlgarson
Joined: Mon Dec 07, 2009 10:30 pm Posts: 26 Location: Dorrigo NSW
|
 Posted: Fri Feb 12, 2010 12:32 am |
|
|
What is the best way to swap them back
|
|
|
|
 |
Taff
Joined: Sun Aug 13, 2006 11:30 pm Posts: 889 Location: Brisbane
|
 Posted: Fri Feb 12, 2010 12:35 am |
|
|
Its just a matter of taking the extended out and putting the stock ones in.
15 minute job to do both sides. Only 4 bolts.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Fri Feb 12, 2010 12:36 am |
|
Remove the bolts through the springs at the shackle end, drop the end of the spring to the floor, remove the bolts holding the shackle to the chassis, bolt the stock shackle to the chassis, bring the spings back up and bolt into the shackle.
Easy. 
_________________ I want my old sig back 
|
|
|
|
 |
carlgarson
Joined: Mon Dec 07, 2009 10:30 pm Posts: 26 Location: Dorrigo NSW
|
 Posted: Fri Feb 12, 2010 12:58 am |
|
Ben_Sierra wrote: Remove the bolts through the springs at the shackle end, drop the end of the spring to the floor, remove the bolts holding the shackle to the chassis, bolt the stock shackle to the chassis, bring the spings back up and bolt into the shackle. Easy.  thank you
|
|
|
|
 |
Choppy

az supporter
Joined: Fri Nov 06, 2009 10:30 pm Posts: 1074 Location: sunshinecoast
|
 Posted: Fri Feb 12, 2010 1:02 am |
|
Taff wrote: Its just a matter of taking the extended out and putting the stock ones in.
15 minute job to do both sides. Only 4 bolts.
hopefully it does only take 15min i remember when SI3RR4 and i changed his springs, sometimes those damn bolts just dont want to budge. but yes fairly simple procedure
|
|
|
|
 |
Taff
Joined: Sun Aug 13, 2006 11:30 pm Posts: 889 Location: Brisbane
|
 Posted: Fri Feb 12, 2010 1:10 am |
|
|
A highlift makes this a very easy job because you can get the car just in the right spot so there is no load on the shackles at all. then everything slides apart real nice.
|
|
|
|
 |
Red89
Joined: Tue Jan 12, 2010 10:30 pm Posts: 2801 Location: Perth
|
 Posted: Fri Feb 12, 2010 1:14 am |
|
|
Doing both sides at the same time helps as well. Take both drivers and Pass. side extended shackles off and then put the stock ones back on.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Fri Feb 12, 2010 1:17 am |
|
Taff wrote: A highlift makes this a very easy job because you can get the car just in the right spot so there is no load on the shackles at all. then everything slides apart real nice.
But you have to hit some thing with a hammer, just cause it make's you feel tough & in control.
P.s. Easy job
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
Taff
Joined: Sun Aug 13, 2006 11:30 pm Posts: 889 Location: Brisbane
|
 Posted: Fri Feb 12, 2010 1:24 am |
|
|
Im always tough and in control, i dont need to hit things with a hammer to get that feeling.
|
|
|
|
 |
stuzuki
Joined: Wed Apr 09, 2008 11:30 pm Posts: 91 Location: Baulko, Sydney.
|
 Posted: Fri Feb 12, 2010 1:25 am |
|
|
its amazing how good you feel after hitting something.
|
|
|
|
 |
Choppy

az supporter
Joined: Fri Nov 06, 2009 10:30 pm Posts: 1074 Location: sunshinecoast
|
 Posted: Fri Feb 12, 2010 1:30 am |
|
stuzuki wrote: its amazing how good you feel after hitting something.
haha this comment could easily be takin out of context if u have a disturbed mind such as mine . . . ps definalty do both at same and use jacks, takes all tension off shackles
|
|
|
|
 |
Taff
Joined: Sun Aug 13, 2006 11:30 pm Posts: 889 Location: Brisbane
|
 Posted: Fri Feb 12, 2010 6:51 am |
|
|
I dont know about you Al but i feel fantastic.
|
|
|
|
 |
|