[Daniboy]

Just wanting to know if and where I can purchase reduction gears for my 1 litre 4.89:1 maybe ?

[masterA]

Search function at the top is your friend

But since you're new.....
http://www.lowrangeoffroad.com/

[sideways]

If you have an early SJ410 with the non-4wd light transfer case you will need to find a switched transfercase. The non-switch transfer wont take aftermarket gears.

[Daniboy]

Thanks sideways just what i needed to know it is a non-switch what other option would u recommend if I can't find another case ?

[mrw82]

For a non switched case you have 2 options. Find a switched case or stick with standard gearing.

[Daniboy]

So I take it a 1.3 case can't be adapted to fit?

[mrw82]

Yes a 1.3 case will drop straight in. They are externally the same. But flanges are different and not interchangeable, so try and get the tail shaft flanges so you can run a half and half uni, or get a 1 litre switched case.

[Daniboy]

Thanks mrw82 that's helped me out heaps

[masterA]

To my knowledge the flanges are interchangable
I got a 1.3L case and just swapped the flanges to fit my tailshaft/unis (they're all 1L with the smaller bolts)

[tanshi]

flanges from a switch type 1 litre will swap, non switch type wont