| Author |
Message |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu May 13, 2010 9:25 am |
|
Ok time for a noob question
I wana change the gearbox oil on my vitara this weekend but i just need to know how much oil do they take?????
and does anyone know the best oil to use for a really noisey gearbox
Cheers Joe
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Thu May 13, 2010 9:30 am |
|
joseph wrote: Ok time for a noob question I wana change the gearbox oil on my vitara this weekend but i just need to know how much oil do they take????? and does anyone know the best oil to use for a really noisey gearboxCheers Joe
morays at 50% 
|
|
|
|
 |
BJPK
Joined: Thu Feb 19, 2009 10:30 pm Posts: 786 Location: perth
|
 Posted: Thu May 13, 2010 9:42 am |
|
|
vmx 80 works well pretty sure made by castrol.
you could also use an additive.
wont take much couple of litres id say.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Thu May 13, 2010 9:45 am |
|
shep wrote: joseph wrote: Ok time for a noob question I wana change the gearbox oil on my vitara this weekend but i just need to know how much oil do they take????? and does anyone know the best oil to use for a really noisey gearboxCheers Joe morays at 50% 
Who's that shep? I have heard of Morly's. Got a pic or a link??
Vmx80 is a Castrol product, but most brand's will have a straight 80w, how noisy are you talking Joe???
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu May 13, 2010 9:51 am |
|
steknig wrote: shep wrote: joseph wrote: Ok time for a noob question I wana change the gearbox oil on my vitara this weekend but i just need to know how much oil do they take????? and does anyone know the best oil to use for a really noisey gearboxCheers Joe morays at 50%  Who's that shep? I have heard of Morly's. Got a pic or a link?? Vmx80 is a Castrol product, but most brand's will have a straight 80w, how noisy are you talking Joe???
both as bad as each other
http://www.moreysoil.com/
|
|
|
|
 |
Chop

az supporter
Joined: Sat Aug 12, 2006 11:30 pm Posts: 6456 Location: Radelaide ofcourse!
Vehicle: Suzuki GV 03/ 2010 DDIS NGV
|
 Posted: Thu May 13, 2010 9:53 am |
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Thu May 13, 2010 10:08 am |
|
3.3 litres for the gearbox + transfercase- 70w/90
3.3 litres for the front & back diffs - 80w/90
an old suzuki mechanic told me to use castrol & morey's oil stabaliser 
_________________ You're just hating because you don't understand
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu May 13, 2010 10:29 am |
|
steknig wrote: shep wrote: joseph wrote: Ok time for a noob question I wana change the gearbox oil on my vitara this weekend but i just need to know how much oil do they take????? and does anyone know the best oil to use for a really noisey gearboxCheers Joe morays at 50%  Who's that shep? I have heard of Morly's. Got a pic or a link?? Vmx80 is a Castrol product, but most brand's will have a straight 80w, how noisy are you talking Joe???
Pretty bad  its always had a winey noise since i got but now its like a metallic howl
Cheers for all your input fellas ill try this stuff out this weekend and hopefully it turns out good
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Thu May 13, 2010 10:34 am |
|
|
what ended up happening with the gearbox out of the old vit, from memory the engine was going into a sierra?
is it still kicking around...
_________________ You're just hating because you don't understand
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu May 13, 2010 10:43 am |
|
atari4x4 wrote: what ended up happening with the gearbox out of the old vit, from memory the engine was going into a sierra?
is it still kicking around...
Gearbox snapped in half
Brodie keeped the motor and wiring then the rest went to sims metal.....
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
BJPK
Joined: Thu Feb 19, 2009 10:30 pm Posts: 786 Location: perth
|
 Posted: Thu May 13, 2010 10:47 am |
|
|
may just be noisy throwout bearing? doesit go away when you depress the clutch? or possibly input shaft bearing.
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu May 13, 2010 10:59 am |
|
BJPK wrote: may just be noisy throwout bearing? doesit go away when you depress the clutch? or possibly input shaft bearing.
Nah not the throwout bearing it comes on when under load......
Did you get my pm?????
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Thu May 13, 2010 11:13 am |
|
Chop wrote: You mean this gear shep? http://www.moreysoil.com/Chop
that's the stuff, they have a oil stabiliser that is like syncros in a bottle. 
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu May 13, 2010 8:14 pm |
|
OK i just noticed on my way to work that the noise is only really there in 1,2 and 3  4 and 5 gears still have the normal gearbox whine but are fine other then that....
Any ideas what it could be??????
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Sat May 15, 2010 5:00 am |
|
Done a oil change with vmx80 and made no differance
Any idea where i can get ahold of that moreysoil????i had a look at supercheep and autoone but they didnt have any 
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sat May 15, 2010 7:03 am |
|
|
_________________ You're just hating because you don't understand
|
|
|
|
 |
buzbox
Joined: Thu Jul 16, 2009 11:30 pm Posts: 3600 Location: Wollongong NSW
Vehicle: LWB Sierra & XL7
|
 Posted: Sat May 15, 2010 7:04 am |
|
|
SCA usually stock Lucas products.. Similar stuff, different brand.
I've got a small tube of Nulon gear and diff treatment. It worked really well in my commo when I had it.
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Sat May 15, 2010 10:37 am |
|
I had another look at supercrap and found some  Ill try it out tomorrow.
I went for a bit of a drive before and now after the oil change it does seem a bit quieter so hopefully this stuff helps...........
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
dave07

az supporter
Joined: Wed Oct 07, 2009 10:30 pm Posts: 329 Location: Bunbury, WA
|
 Posted: Mon May 31, 2010 1:57 pm |
|
|
i no this is prob a stupid question but where and how do you put the oil stabilizer in? like with engine diff gbox oils or just one?
_________________ Vitara JX 1.6, straight through 2 1/4" exhaust, 2.
|
|
|
|
 |
|