| Author |
Message |
diver_dingo
Joined: Mon Jul 19, 2010 8:08 am Posts: 73 Location: Hamilton, Victoria
|
 Posted: Thu Aug 05, 2010 10:08 am |
|
|
i went through a puddle that was a little deep tonight (nearly to the door handles) and now my vitara is all wet, the water got to the top of the seats. Any ideas on how to dry it all out?
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Aug 05, 2010 10:09 am |
|
|
pull it all apart so you can clean the floor and really air the carpet out, its the only way
check all your driveline oils too
|
|
|
|
 |
Bucket

az supporter
Joined: Mon Nov 30, 2009 10:30 pm Posts: 2191 Location: Vic
Vehicle: SJ50 hardtop!
|
 Posted: Thu Aug 05, 2010 10:17 am |
|
|
Where the heck was that?
Undo your bungs and pull out the seats and carpet. Give it a good clean out with a hose and rag
|
|
|
|
 |
89_tintop

az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
 Posted: Thu Aug 05, 2010 10:36 am |
|
|
|
 |
TZAR

az supporter
Joined: Tue Aug 01, 2006 11:30 pm Posts: 3461 Location: licking some windows
Vehicle: LJ20 LJ50
|
 Posted: Thu Aug 05, 2010 10:39 am |
|
|
put the sprinkler inside for the night then dry it out for days then sell it and get one that won't have massive electrical problems in 6 months
_________________ Camels have nice toes
|
|
|
|
 |
89_tintop

az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
 Posted: Thu Aug 05, 2010 10:58 am |
|
|
EFI or carby???
If it is efi and the water was that high then there will be problems later on. I would be pulling as much out and let it dry iber a few days.. If it is efi I would also be looking at taking the computer out and drying it out with an electrical spray.. And also the connections to the computer..
Then sell it....
And always measure puddles.... As they are usually deeper them you think
|
|
|
|
 |
lordfury007
Joined: Mon Sep 28, 2009 11:30 pm Posts: 298 Location: Darwin, NT
|
 Posted: Thu Aug 05, 2010 10:58 am |
|
|
seats should pull out fairly easily, 4 bolts and they come out, then pull out the carpet, hose it down with fresh water, let it all dry out for a day or two, then put it all back together. might need to get into the door panels and such as well
(this is why i bought a sierra, and got rid of my grand vitara - so much easier pulling a sierra apart to clean it)
_________________ 1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Thu Aug 05, 2010 11:03 am |
|
|
did the ECU go under?
_________________ You're just hating because you don't understand
|
|
|
|
 |
diver_dingo
Joined: Mon Jul 19, 2010 8:08 am Posts: 73 Location: Hamilton, Victoria
|
 Posted: Thu Aug 05, 2010 11:15 am |
|
|
old carby, no ECU, so im safe there. No carpet, havent put it back in from the first time i wet it, but the seats are the biggest problem i have. Hopefully i can dry them out. water was very deep, all the water came through the hole that the gear stick comes through.
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Thu Aug 05, 2010 12:10 pm |
|
lol i cant belive how many people told him to sell it poor guy he might like his zook 
|
|
|
|
 |
diver_dingo
Joined: Mon Jul 19, 2010 8:08 am Posts: 73 Location: Hamilton, Victoria
|
 Posted: Thu Aug 05, 2010 12:36 pm |
|
lol too many blokes out there that dont work on their own zook 
|
|
|
|
 |
89_tintop

az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
 Posted: Thu Aug 05, 2010 7:18 pm |
|
|
We told him to sell it if it was efi.... Its not... So problems
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Thu Aug 05, 2010 7:23 pm |
|
89_tintop wrote: We told him to sell it if it was efi.... Its not... So problems
because thay wanted the eng.. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
89_tintop

az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
 Posted: Thu Aug 05, 2010 7:34 pm |
|
|
Shhhhhh...... Dont say that out loud.......
Its a secret
|
|
|
|
 |
whincup

az supporter
Joined: Sat Apr 17, 2010 11:30 pm Posts: 1588 Location: Gracemere, QLD
Vehicle: '94 suzuki maruti
|
 Posted: Thu Aug 05, 2010 10:02 pm |
|
steknig wrote: 89_tintop wrote: We told him to sell it if it was efi.... Its not... So problems because thay wanted the eng.. 
...u guys want an efi engine that was partially submerged in muddy water? have fun with that. 
|
|
|
|
 |
diver_dingo
Joined: Mon Jul 19, 2010 8:08 am Posts: 73 Location: Hamilton, Victoria
|
 Posted: Thu Aug 05, 2010 11:31 pm |
|
|
lol partially? im lucky i had a snorkel, i have no headlights for some reason now...
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Fri Aug 06, 2010 1:17 am |
|
diver_dingo wrote: lol partially? im lucky i had a snorkel, i have no headlights for some reason now...
haha sounds like my zook though my pulled out just fine any everything still works  go the carbs lol
|
|
|
|
 |
lordfury007
Joined: Mon Sep 28, 2009 11:30 pm Posts: 298 Location: Darwin, NT
|
 Posted: Fri Aug 06, 2010 1:37 am |
|
diver_dingo wrote: lol partially? im lucky i had a snorkel, i have no headlights for some reason now...
if you run petrol, theres actually not much risk of "hydraulic"ing your engine... your engine will usually stall before it bends piston rods and cranks... (trust me - i've done it before) then all you have to do is pull out your spark plugs, get the water out of the cylinders, oil up the cylinders through the spark plug hole, put it back together, drain the engine oil and replace it, then start it up again.
As for your headlights, check all your fuses - theres a good possibility water got in there somewhere and blew something. If that doesn't work, get a 12v test light and trace the wiring to see where the power is / isn't getting to.
Also, i think its been said before, but check your diff, transfer case and gearbox oils just to be on the safe side.
_________________ 1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su
|
|
|
|
 |
diver_dingo
Joined: Mon Jul 19, 2010 8:08 am Posts: 73 Location: Hamilton, Victoria
|
 Posted: Fri Aug 06, 2010 2:15 am |
|
yeah i replaced the diffs, transfer case and gearbox oils a few weeks ago and there was no water in them, i had been doing some fairly wet driving before that, some are on youtube
http://www.youtube.com/user/diverdingo
have a look at some vids there to see what ive been going through....
has anyone done a submarine conversion to their vitara? my wife thinks its a good idea...the water all came in through the gearstick hole so if i seal that up i should be right
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Fri Aug 06, 2010 2:31 am |
|
|
If the water came in through the gear stick hole its a fairly good indication that there was water over the top of the box.
If you don't have breather hoses on the gearbox, trasnfer and diffs, then do an oil change now, before you destroy the lot...
_________________ I want my old sig back 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Fri Aug 06, 2010 6:46 am |
|
whincup wrote: steknig wrote: 89_tintop wrote: We told him to sell it if it was efi.... Its not... So problems because thay wanted the eng..  ...u guys want an efi engine that was partially submerged in muddy water? have fun with that. 
& I would!!
If the price is right, thing's can be fixed.. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
diver_dingo
Joined: Mon Jul 19, 2010 8:08 am Posts: 73 Location: Hamilton, Victoria
|
 Posted: Fri Aug 06, 2010 7:51 am |
|
|
yeah everything has breather hoses attached that go up high into the engine bay, i do plenty of driving through water so thats the first thing i checked. Got the seats and carpet out today, the seats still have water dripping from them, hopefully we get some sun this weekend and they dry out
|
|
|
|
 |
Lockie666

az supporter
Joined: Sat Apr 17, 2010 11:30 pm Posts: 1874 Location: Perth
|
 Posted: Fri Aug 06, 2010 8:48 am |
|
Ben_Sierra wrote: If the water came in through the gear stick hole its a fairly good indication that there was water over the top of the box.
If you don't have breather hoses on the gearbox, trasnfer and diffs, then do an oil change now, before you destroy the lot...
My brothers old GQ patrol diffs were full of muddy water for about three months.  They EVEN outlasted the engine.
Hahaha, but yeah I agree with Ben, check your oils
_________________ helloo
|
|
|
|
 |
|