| Author |
Message |
Mike_B
Joined: Sun Feb 24, 2013 7:56 am Posts: 76 Location: Burnie, Tas
Vehicle: 95 Vitara Hardtop
|
 Posted: Thu Dec 26, 2013 11:16 am |
|
|
A few months ago I got my gearbox rebuilt cos it was noisy in 3rd and 5th and had a few other niggling issues. Went back in and it was much quieter, but occasionally after braking for a corner I noticed the same noise in the box when accelerating again, almost like part of the box was temporarily starved of oil, and now it seems like the noise in 3rd is just starting to come back, although not nearly as bad as it was, so; - Has anyone else experienced this issue? - Is it worth trying to get some extra oil into the box? (This was a fix for Lada Niva gearbox issues). - Is it worth putting an additive into it, and if so is the Nulon one suggested in another post still worth trying?
I used the recommended grade of gear oil and it's Caltex brand so hoping it would be half decent. I have an oil pump to fill the gearbox thru the filler plug, pretty sure it was filled at least to the filler plug level.
Thanks for any input.
Mike.
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Thu Dec 26, 2013 12:01 pm |
|
I use some additive and mines gone quite, even quieter since I replaced all seals for some reason 
|
|
|
|
 |
Scrawny

I live here!
Joined: Tue Jan 29, 2008 10:30 pm Posts: 10528 Location: Brissie
Vehicle: Popemobile
|
 Posted: Thu Dec 26, 2013 12:23 pm |
|
|
Try using Penrite oil. If that doesn't shut it up then add the additive
|
|
|
|
 |
bohuler

az supporter
Joined: Wed Nov 10, 2010 9:18 am Posts: 1376 Location: Avonsleigh, Victoria
|
 Posted: Thu Dec 26, 2013 12:31 pm |
|
As a general rule I would advise against putting more oil in a gearbox then is recommended. It 'could' put extra strain on your seals and blow them out if you put to much in but I do stand to be corrected if gwagen has a better idea 
_________________ Life's short, fiddle with your willy while you can
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Thu Dec 26, 2013 12:47 pm |
|
|
Yer extra oil the required is not good .100/200ml extra probably wont hurt
|
|
|
|
 |
GT_Tony
Joined: Tue Aug 06, 2013 8:38 pm Posts: 130 Location: Gold Coast
Vehicle: 09 Jimny JX
|
 Posted: Thu Dec 26, 2013 1:28 pm |
|
|
the Subaru world swear by the additive Nulon G70.
i am running Penrite oil and Nulon G70 in the diffs/ gearbox and transfer case..
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Thu Dec 26, 2013 1:50 pm |
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Thu Dec 26, 2013 1:56 pm |
|
|
Fill it with grease.
_________________ mlm
|
|
|
|
 |
kenn
Joined: Tue Nov 11, 2008 10:30 pm Posts: 1202 Location: Melbourne
|
 Posted: Thu Dec 26, 2013 2:58 pm |
|
|
I ran Castrol synthetic gear oil and Nulon G70 in my Jimny when I was a courier, which saw roughly 1500 gear changes a day. It never gave a peep in over 100,000 k's. My first experience with G70 was in my combo gear box, before I got the Jimny, it started making noise so I added G70 and it shut up for another 10,000k's then spat the main shaft through the end of the box, through the clutch into the fly wheel. Since then I swear by the stuff and it goes in all of my gear trains.
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Thu Dec 26, 2013 4:58 pm |
|
|
Yer I use g70 in my tcase , diffs, and gearbox. Great stuff
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Thu Dec 26, 2013 5:19 pm |
|
|
VMX80
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
rob45x
Joined: Mon Jun 04, 2012 10:09 pm Posts: 813 Location: Sydney
Vehicle: 92 sierra tintop, 88 WT sj50
|
 Posted: Thu Dec 26, 2013 6:56 pm |
|
|
Try Lucas Oil stabilizer additive It shut up my transfer case whine for a few months
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Dec 26, 2013 7:51 pm |
|
|
|
 |
offroadjack
Joined: Wed Oct 17, 2012 9:09 am Posts: 292 Location: la la land
Vehicle: 96 SV620 shitbox
|
 Posted: Thu Dec 26, 2013 8:17 pm |
|
Bruce wrote: VMX80 I have never used anything else but castrol, VMX80 would be the best to use. Not a fan of additives but the G70 has proven to work, usually the noises are from the bearings. I've used it in several diffs that were noisy and it does shut it up..
|
|
|
|
 |
KEENSY85
Joined: Wed May 09, 2012 12:46 am Posts: 1742 Location: north brisbane
Vehicle: 1985 lwb sierra UTE
|
 Posted: Thu Dec 26, 2013 8:23 pm |
|
offroadjack wrote: Bruce wrote: VMX80 I have never used anything else but castrol, VMX80 would be the best to use. Not a fan of additives but the G70 has proven to work, usually the noises are from the bearings. I've used it in several diffs that were noisy and it does shut it up.. I use vmx 80 and an additive in my gearbox as it developed a noise soon after I bought the car and its been quite ever since.my car does 60km a day
|
|
|
|
 |
Mike_B
Joined: Sun Feb 24, 2013 7:56 am Posts: 76 Location: Burnie, Tas
Vehicle: 95 Vitara Hardtop
|
 Posted: Fri Dec 27, 2013 6:10 pm |
|
|
Thanks for all the replies, I will try the G70 additive for now, and look for some better gear oil for the next oil change.
|
|
|
|
 |
offroadjack
Joined: Wed Oct 17, 2012 9:09 am Posts: 292 Location: la la land
Vehicle: 96 SV620 shitbox
|
 Posted: Fri Dec 27, 2013 8:05 pm |
|
|
Just a reminder that you need to use the additive every time you change your oil...40.000 k's intervals
|
|
|
|
 |
|