It is currently Sun Jul 26, 2026 7:30 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 17 posts ] 
Author Message

Offline

Joined: Sun Feb 24, 2013 7:56 am
Posts: 76
Location: Burnie, Tas
Vehicle: 95 Vitara Hardtop

Post Posted: Thu Dec 26, 2013 11:16 am 
Reply with quote Top  
A few months ago I got my gearbox rebuilt cos it was noisy in 3rd and 5th and had a few other niggling issues.
Went back in and it was much quieter, but occasionally after braking for a corner I noticed the same noise in the box when accelerating again, almost like part of the box was temporarily starved of oil, and now it seems like the noise in 3rd is just starting to come back, although not nearly as bad as it was, so;
- Has anyone else experienced this issue?
- Is it worth trying to get some extra oil into the box? (This was a fix for Lada Niva gearbox issues).
- Is it worth putting an additive into it, and if so is the Nulon one suggested in another post still worth trying?

I used the recommended grade of gear oil and it's Caltex brand so hoping it would be half decent.
I have an oil pump to fill the gearbox thru the filler plug, pretty sure it was filled at least to the filler plug level.

Thanks for any input.

Mike.

 Profile  

Offline
User avatar

Joined: Wed May 09, 2012 12:46 am
Posts: 1742
Location: north brisbane
Vehicle: 1985 lwb sierra UTE

Post Posted: Thu Dec 26, 2013 12:01 pm 
Reply with quote Top  
I use some additive and mines gone quite, even quieter since I replaced all seals for some reason :?:

 Profile  

Offline
I live here!
I live here!
User avatar

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Post Posted: Thu Dec 26, 2013 12:23 pm 
Reply with quote Top  
Try using Penrite oil. If that doesn't shut it up then add the additive

 Profile  

Offline
az supporter
az supporter

Joined: Wed Nov 10, 2010 9:18 am
Posts: 1376
Location: Avonsleigh, Victoria

Post Posted: Thu Dec 26, 2013 12:31 pm 
Reply with quote Top  
As a general rule I would advise against putting more oil in a gearbox then is recommended. It 'could' put extra strain on your seals and blow them out if you put to much in but I do stand to be corrected if gwagen has a better idea :D

_________________
Life's short, fiddle with your willy while you can

 Profile  

Offline
User avatar

Joined: Wed May 09, 2012 12:46 am
Posts: 1742
Location: north brisbane
Vehicle: 1985 lwb sierra UTE

Post Posted: Thu Dec 26, 2013 12:47 pm 
Reply with quote Top  
Yer extra oil the required is not good .100/200ml extra probably wont hurt

 Profile  

Offline
User avatar

Joined: Tue Aug 06, 2013 8:38 pm
Posts: 130
Location: Gold Coast
Vehicle: 09 Jimny JX

Post Posted: Thu Dec 26, 2013 1:28 pm 
Reply with quote Top  
the Subaru world swear by the additive Nulon G70.

i am running Penrite oil and Nulon G70 in the diffs/ gearbox and transfer case..

 Profile  

Offline
User avatar

Joined: Wed May 09, 2012 12:46 am
Posts: 1742
Location: north brisbane
Vehicle: 1985 lwb sierra UTE

Post Posted: Thu Dec 26, 2013 1:50 pm 
Reply with quote Top  
What subara ?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Thu Dec 26, 2013 1:56 pm 
Reply with quote Top  
Fill it with grease.

_________________
mlm

 Profile  

Offline

Joined: Tue Nov 11, 2008 10:30 pm
Posts: 1202
Location: Melbourne

Post Posted: Thu Dec 26, 2013 2:58 pm 
Reply with quote Top  
I ran Castrol synthetic gear oil and Nulon G70 in my Jimny when I was a courier, which saw roughly 1500 gear changes a day. It never gave a peep in over 100,000 k's.
My first experience with G70 was in my combo gear box, before I got the Jimny, it started making noise so I added G70 and it shut up for another 10,000k's then spat the main shaft through the end of the box, through the clutch into the fly wheel. Since then I swear by the stuff and it goes in all of my gear trains.

 Profile  

Offline
User avatar

Joined: Wed May 09, 2012 12:46 am
Posts: 1742
Location: north brisbane
Vehicle: 1985 lwb sierra UTE

Post Posted: Thu Dec 26, 2013 4:58 pm 
Reply with quote Top  
Yer I use g70 in my tcase , diffs, and gearbox. Great stuff

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 4003
Location: Brisbane

Post Posted: Thu Dec 26, 2013 5:19 pm 
Reply with quote Top  
VMX80

_________________
[quote="royce"] I wouldnt mind insulating my rear

 Profile  

Offline
User avatar

Joined: Mon Jun 04, 2012 10:09 pm
Posts: 813
Location: Sydney
Vehicle: 92 sierra tintop, 88 WT sj50

Post Posted: Thu Dec 26, 2013 6:56 pm 
Reply with quote Top  
Try Lucas Oil stabilizer additive
It shut up my transfer case whine for a few months

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Thu Dec 26, 2013 7:51 pm 
Reply with quote Top  
I put this in the swift
http://www.redlineoil.com/product.aspx?product=50204

I wouldn't of said there was anything wrong with the box before but its a lot lot quieter now, its not cheap though.

 Profile  

Offline
User avatar

Joined: Wed Oct 17, 2012 9:09 am
Posts: 292
Location: la la land
Vehicle: 96 SV620 shitbox

Post Posted: Thu Dec 26, 2013 8:17 pm 
Reply with quote Top  
Bruce wrote:
VMX80

I have never used anything else but castrol, VMX80 would be the best to use.
Not a fan of additives but the G70 has proven to work, usually the noises are from the bearings.
I've used it in several diffs that were noisy and it does shut it up..

 Profile  

Offline
User avatar

Joined: Wed May 09, 2012 12:46 am
Posts: 1742
Location: north brisbane
Vehicle: 1985 lwb sierra UTE

Post Posted: Thu Dec 26, 2013 8:23 pm 
Reply with quote Top  
offroadjack wrote:
Bruce wrote:
VMX80

I have never used anything else but castrol, VMX80 would be the best to use.
Not a fan of additives but the G70 has proven to work, usually the noises are from the bearings.
I've used it in several diffs that were noisy and it does shut it up..

I use vmx 80 and an additive in my gearbox as it developed a noise soon after I bought the car and its been quite ever since.my car does 60km a day

 Profile  

Offline

Joined: Sun Feb 24, 2013 7:56 am
Posts: 76
Location: Burnie, Tas
Vehicle: 95 Vitara Hardtop

Post Posted: Fri Dec 27, 2013 6:10 pm 
Reply with quote Top  
Thanks for all the replies, I will try the G70 additive for now, and look for some better gear oil for the next oil change.

 Profile  

Offline
User avatar

Joined: Wed Oct 17, 2012 9:09 am
Posts: 292
Location: la la land
Vehicle: 96 SV620 shitbox

Post Posted: Fri Dec 27, 2013 8:05 pm 
Reply with quote Top  
Just a reminder that you need to use the additive every time you change your oil...40.000 k's intervals

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours