auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

16v head

Page 1 of 1

[ 18 posts ]

Print view

Previous topic | Next topic

Author

Message

zookyute1981

Joined: Sat Jun 27, 2009 11:30 pm
Posts: 314
Location: mount barker (GSWA)

Posted: Sun Feb 13, 2011 7:39 am

will a head off a 1.6 lyr fit on my 1.3ltr if so what will be the benefits cheers

mondo

Joined: Wed Dec 29, 2010 10:18 pm
Posts: 481
Location: Jimboomba

Posted: Sun Feb 13, 2011 7:45 am

g13ba or g13bb?
16 valve head won't fit onto an 8 valve engine to my knowledge

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 13, 2011 7:46 am

16v head will not go onto an 8v block, as the pistons do not have enough valve reliefs in them.

_________________
2013 GV
1998 SV420 ute

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Sun Feb 13, 2011 7:55 am

if its a 1.6 8v head it shall fit?

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 13, 2011 8:00 am

zooky08 wrote:

if its a 1.6 8v head it shall fit?

Apparently so.

_________________
2013 GV
1998 SV420 ute

mondo

Joined: Wed Dec 29, 2010 10:18 pm
Posts: 481
Location: Jimboomba

Posted: Sun Feb 13, 2011 8:04 am

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 13, 2011 8:44 am

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

_________________
2013 GV
1998 SV420 ute

MrRocky

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Posted: Sun Feb 13, 2011 9:32 am

^^^ i concur

_________________
...

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Sun Feb 13, 2011 10:14 am

Fatzook wrote:

16v head will not go onto an 8v block, as the pistons do not have enough valve reliefs in them.

I believe it will bolt on with no problems and just become an interference engine. Am I correct?

_________________
Lil Foot!
http://tiny.cc/gtsw1

2stroker

Joined: Sun Sep 07, 2008 11:30 pm
Posts: 2689
Location: North Brisbane

Posted: Sun Feb 13, 2011 11:17 am

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Sun Feb 13, 2011 11:22 am

2stroker wrote:

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

The 1.6 8V head does have the bigger valves compared to teh 1.3 8V

_________________
Lil Foot!
http://tiny.cc/gtsw1

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 13, 2011 11:23 am

2stroker wrote:

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

Fair enough. :wink:

Wouldn't be the first time I threw money away, and judging by the growing tally of parts on the TSOR shop ute build, it won't be the last time either :lol:

_________________
2013 GV
1998 SV420 ute

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 13, 2011 11:24 am

JrZook wrote:

2stroker wrote:

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

The 1.6 8V head does have the bigger valves compared to teh 1.3 8V

Wouldn't the valves crash into the piston tops because if the missing reliefs?

_________________
2013 GV
1998 SV420 ute

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Sun Feb 13, 2011 11:27 am

Fatzook wrote:

JrZook wrote:

2stroker wrote:

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

The 1.6 8V head does have the bigger valves compared to teh 1.3 8V

Wouldn't the valves crash into the piston tops because if the missing reliefs?

There wwas some post round here not long ago talking bout this and it did have some good tech and the answer.

_________________
Lil Foot!
http://tiny.cc/gtsw1

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 13, 2011 11:28 am

JrZook wrote:

Fatzook wrote:

JrZook wrote:

2stroker wrote:

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

The 1.6 8V head does have the bigger valves compared to teh 1.3 8V

Wouldn't the valves crash into the piston tops because if the missing reliefs?

There wwas some post round here not long ago talking bout this and it did have some good tech and the answer.

But it wasn't this post right? :lol:

_________________
2013 GV
1998 SV420 ute

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Sun Feb 13, 2011 11:35 am

Fatzook wrote:

JrZook wrote:

Fatzook wrote:

JrZook wrote:

2stroker wrote:

Fatzook wrote:

mondo wrote:

don't the 1.3 8 valve heads flow better than the 1.6 8 valve heads anyway??

I'd wager there is sweet FA difference

You would loose that wager Pete, 1600 head and manifold actually flows much better.

The 1.6 8V head does have the bigger valves compared to teh 1.3 8V

Wouldn't the valves crash into the piston tops because if the missing reliefs?

There wwas some post round here not long ago talking bout this and it did have some good tech and the answer.

But it wasn't this post right? :lol:

Nah cause your replying :rofl:

Jks :p

_________________
Lil Foot!
http://tiny.cc/gtsw1

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Sun Feb 13, 2011 1:06 pm

As much as I know
16v head will bolt to the block but will not work with 8v pistons.
To fit the 16v head To the 8v block just have to change pistons over.
1.6 head has slightly bigger valves then the 1.3 head.
Valves would come very close to hitting I would think

zookyute1981

Joined: Sat Jun 27, 2009 11:30 pm
Posts: 314
Location: mount barker (GSWA)

Posted: Sun Feb 13, 2011 2:06 pm

cheers guys on all the info guess its not going on

Page 1 of 1

[ 18 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 576 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum