| Author |
Message |
85Drover
Joined: Sat Feb 13, 2010 10:30 pm Posts: 241 Location: Eildon, VIC
Vehicle: '95 lwb vitara
|
 Posted: Tue Mar 15, 2011 6:17 am |
|
If the column is locked, will it come out after unbolting the four firewall fastening bolts and the two torx head bolts?... mine isn't coming out. -__- any tricks to getting the fucker out? 
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Tue Mar 15, 2011 6:22 am |
|
|
tried jiggling the column with the key in the ignition?
_________________ You're just hating because you don't understand
|
|
|
|
 |
stocker
Joined: Wed Dec 08, 2010 7:16 am Posts: 941 Location: Shidoni!
|
 Posted: Tue Mar 15, 2011 6:30 am |
|
85Drover wrote: If the column is locked, will it come out after unbolting the four firewall fastening bolts and the two torx head bolts?... mine isn't coming out. -__- any tricks to getting the fucker out? 
When the world is dark and all else fails...

_________________ Stocker
|
|
|
|
 |
cairns27
Joined: Thu Dec 23, 2010 7:42 pm Posts: 489 Location: Macleay Island
Vehicle: '95 Vitara JXI LWB G16B
|
 Posted: Tue Mar 15, 2011 6:35 am |
|
|
Ya can take the steering lock off by undoing the two bolts holding it.The heads are designed to break off.Use a small punch and bring them through enough to grab with visegrips.
bye
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Mar 15, 2011 6:52 am |
|
cairns27 wrote: Ya can take the steering lock off by undoing the two bolts holding it.The heads are designed to break off.Use a small punch and bring them through enough to grab with visegrips.
bye
Bingo!!!! 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
85Drover
Joined: Sat Feb 13, 2010 10:30 pm Posts: 241 Location: Eildon, VIC
Vehicle: '95 lwb vitara
|
 Posted: Tue Mar 15, 2011 8:39 am |
|
cairns27 wrote: Ya can take the steering lock off by undoing the two bolts holding it.The heads are designed to break off.Use a small punch and bring them through enough to grab with visegrips.
bye
Where abouts are these 2 bolts situated mate?
Cheers.
|
|
|
|
 |
inbits
Joined: Mon Sep 13, 2010 8:30 am Posts: 600 Location: qld
|
 Posted: Tue Mar 15, 2011 8:49 am |
|
|
On the ignition barrel mount
|
|
|
|
 |
85Drover
Joined: Sat Feb 13, 2010 10:30 pm Posts: 241 Location: Eildon, VIC
Vehicle: '95 lwb vitara
|
 Posted: Tue Mar 15, 2011 9:18 am |
|
Still can't find them.  I have everything off but the ignition barrel. Any pics? I'm even looking on the new column and barrel and can't find any pins..
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Mar 15, 2011 9:21 am |
|
|
They no longer look like bolt's, just domed head's..
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
85Drover
Joined: Sat Feb 13, 2010 10:30 pm Posts: 241 Location: Eildon, VIC
Vehicle: '95 lwb vitara
|
 Posted: Tue Mar 15, 2011 9:25 am |
|
|
How do you undo them then?Cheers Stek
|
|
|
|
 |
inbits
Joined: Mon Sep 13, 2010 8:30 am Posts: 600 Location: qld
|
 Posted: Tue Mar 15, 2011 9:32 am |
|
|
Vice grips
Chisel and hammer
Drill
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Mar 15, 2011 9:42 am |
|
cairns27 wrote: Ya can take the steering lock off by undoing the two bolts holding it.The heads are designed to break off.Use a small punch and bring them through enough to grab with visegrips.
bye
Center punch a indent into it, then tap the punch with a hammer in the undo direction, undoing the headless bolt.. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
|