It is currently Tue Aug 04, 2026 8:12 am
Board index » Talking About Stuff » Suzuki Talk

Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 

Print view

Previous topic | Next topic

Author Message
jimbo_jones

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Sep 03, 2011 12:04 pm 
Reply with quote Top  
anyone ever put a SR20T in a sierra? I may be able to get my hands on a red top one out of a silvia

_________________
www.illawarrasuzuki4wdclub.webs.com
 Profile YIM  
dave91

Offline
User avatar

Joined: Sun Mar 27, 2011 11:37 pm
Posts: 411
Location: Brisbane

Post Posted: Sat Sep 03, 2011 12:07 pm 
Reply with quote Top  
My mate has one with a SR20DET. he said that it's quite a lot taller and he said that he had to do a lot of mucking around to get the gear box in. Think he may have had to cut the body so it'd fit. But holyyyyy shite does it go!!

_________________
Every problem can be solved with a Ratchet.
 Profile  
Fatzook

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Sat Sep 03, 2011 12:07 pm 
Reply with quote Top  
Yeah I've seen an SR20DET in a sierra. Tight fit, and completely insane. And not in a good way.

_________________
2013 GV
1998 SV420 ute
 Profile  
atari4x4

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Sat Sep 03, 2011 12:15 pm 
Reply with quote Top  
searched n00b? :lol:

http://auszookers.com/index.php?name=Fo ... r20+sierra

http://auszookers.com/index.php?name=Fo ... a&start=30

Image
Image
Image

i think it was germo or someone on outers/AZ had one going into a LWB with a weird auto/transfer combo, but i think it got parted before finished.

_________________
You're just hating because you don't understand
 Profile WWW  
jimbo_jones

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Sep 03, 2011 12:37 pm 
Reply with quote Top  
yep just found that thread

http://auszookers.com/index.php?name=Fo ... c&start=30

what about the clutch master cylinder may have to mounted under the dash
would there be any chance of geting it engineered in nsw?

_________________
www.illawarrasuzuki4wdclub.webs.com
 Profile YIM  
jimbo_jones

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Sep 03, 2011 12:56 pm 
Reply with quote Top  
found this on pirate

Image

_________________
www.illawarrasuzuki4wdclub.webs.com
 Profile YIM  
MrRocky

Offline
User avatar

Joined: Thu Dec 17, 2009 10:30 pm
Posts: 4731
Location: perth

Post Posted: Sat Sep 03, 2011 1:05 pm 
Reply with quote Top  
transfer has to be moved back about 150mm not really an ideal conversion on a shorty. Iam slowly doing this conversion on my lwb
http://www.auszookers.com/index.php?nam ... 6&start=60

_________________
...
 Profile  
jimbo_jones

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Sat Sep 03, 2011 1:14 pm 
Reply with quote Top  
MrRocky wrote:
transfer has to be moved back about 150mm not really an ideal conversion on a shorty. Iam slowly doing this conversion on my lwb
http://www.auszookers.com/index.php?nam ... 6&start=60


mines alwb any way transfer can be moved it it has 2

_________________
www.illawarrasuzuki4wdclub.webs.com
 Profile YIM  
atari4x4

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Sat Sep 03, 2011 1:21 pm 
Reply with quote Top  
germo's SR20 LWB

http://auszookers.com/index.php?name=Fo ... ic&t=14740

_________________
You're just hating because you don't understand
 Profile WWW  
christover1

Offline
az supporter
az supporter
User avatar

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Post Posted: Sat Sep 03, 2011 11:06 pm 
Reply with quote Top  
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/
 Profile  
shane1992

Offline
az supporter
az supporter
User avatar

Joined: Tue Jun 08, 2010 10:09 am
Posts: 782
Location: Wollongong

Post Posted: Sat Sep 03, 2011 11:19 pm 
Reply with quote Top  
Swear it would be roughly the exact same
conversion as what breno done with the ca18det.... Cause they engine size is pretty much the same. IMO I reckon the sr20det would be death in a zook...Yupu wouldn't wanna be running much boost in it... My 2L 180 pulls fuxking hard and picturing it in a zook would be fun, but ypu will break a shot load of drivetrain stuff....
I'm gettin rid of my 180 soon, adam said he was talking to you about it.....

_________________
http://www.auszookers.com/index.php?name=Forums&fi
 Profile WWW  
Brenno

Offline
User avatar

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 997
Location: Hobart

Post Posted: Sun Sep 04, 2011 12:14 am 
Reply with quote Top  
James - yes it would be very similar to the Ca18, however a little bit bigger I would imagine. Need to be careful with tunnel size if the gearbox is any larger than the CA models.

If you can do an auto, possibly a mix match gearbox like l18pwr has done, it would fit a lot easier as you wouldnt have to move the tcase back, lengthen driveshafts etc.

But its pretty much, clean all mounts of chassis and start again sort of conversion. Its much easier with the body off.
 Profile  
jimbo_jones

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Mon Sep 05, 2011 4:01 am 
Reply with quote Top  
Brenno wrote:
James - yes it would be very similar to the Ca18, however a little bit bigger I would imagine. Need to be careful with tunnel size if the gearbox is any larger than the CA models.

If you can do an auto, possibly a mix match gearbox like l18pwr has done, it would fit a lot easier as you wouldnt have to move the tcase back, lengthen driveshafts etc.

But its pretty much, clean all mounts of chassis and start again sort of conversion. Its much easier with the body off.


not 100% sure if Im goning to do it yet I still have the GTI motor out of my other zook which is a straight swap (every thing is there ready to go) might just put a blower on that abd a after market computer

_________________
www.illawarrasuzuki4wdclub.webs.com
 Profile YIM  
sogone

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Post Posted: Mon Sep 05, 2011 4:09 am 
Reply with quote Top  
The internals between a rb20det, sr20det And ca18det gearbox are identical. You can swap them round, the only thing that changes is the bell housing.
 Profile  
eXc450

Offline

Joined: Tue Sep 21, 2010 9:40 pm
Posts: 268
Location: Newcastle, NSW
Vehicle: 94 Vitara LWB G16b

Post Posted: Mon Sep 05, 2011 4:36 am 
Reply with quote Top  
I always thought the RB20DET had a stronger box than the SR? I could be wrong, but I am sure people upgraded from SR20 to RB20 box...

_________________
------------------------------
94 Vitara LWB G16b
 Profile  
sogone

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Post Posted: Mon Sep 05, 2011 4:52 am 
Reply with quote Top  
Rb25 box is what everyone upgrades to. The boxes out of rb30 skylines have the same internals of all the above. Probably even the vls.
 Profile  
Myles

Offline
az supporter
az supporter
User avatar

Joined: Tue May 05, 2009 11:30 pm
Posts: 973
Location: Samford QLD
Vehicle: G16b Sj80, Version 6 GC8 STi

Post Posted: Mon Sep 05, 2011 6:31 am 
Reply with quote Top  
Some vids of that Gold SR20 turbo that was for sale a while back..


http://www.youtube.com/watch?v=UpfwsvAwwnY

http://www.youtube.com/watch?v=GfDNksTsnDk

_________________
Subi + Suzi = Best of both worlds!
 Profile  
jimbo_jones

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Post Posted: Mon Sep 05, 2011 7:07 am 
Reply with quote Top  
Myles wrote:
Some vids of that Gold SR20 turbo that was for sale a while back..


http://www.youtube.com/watch?v=UpfwsvAwwnY

http://www.youtube.com/watch?v=GfDNksTsnDk


thats awesome 8)

_________________
www.illawarrasuzuki4wdclub.webs.com
 Profile YIM  
stockman

Offline
az supporter
az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Post Posted: Mon Sep 05, 2011 7:10 am 
Reply with quote Top  
http://www.youtube.com/watch?v=0Da0uIPU ... re=related

_________________
Watch out or you'll get sued.
 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 19 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 259 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours

Advertisements by Advertisement Management

Advertisements by Advertisement Management