[shane1992]

Hey, so I am doing another G16B conversion in a zook that currently has a GTI engine..

Just double checking to see if the starter motor, flywheel and clutch of a GTI is the same as what you would get off a Stock Sierra 1.3L engine? Because the blocks are the same or really similar as the Sierra box and engine mounts bolt straigh up right?

Just preparing myself to see wether I will need to sourse a Sierra Starter motor, flywheel etc for when I swap those bits onto the G16B.

Thanks guys,

PS, Looking for a good running G16B too..

PM if you have one please

[want33s]

Flywheel and clutch are same.
1.3 starter will need grinding down on the block side.

Check the damaged vehicles auctions for 2000+ Baleno's.

[Rhino]

want33s wrote:

Check the damaged vehicles auctions for 2000+ Baleno's.

98+ baleno's should be all coil pack. tho i've seen 97's with coil packs where the dizzy usualy is instead of sitting on top.

[want33s]

Rhino wrote:

want33s wrote:

Check the damaged vehicles auctions for 2000+ Baleno's.

98+ baleno's should be all coil pack. tho i've seen 97's with coil packs where the dizzy usualy is instead of sitting on top.

Nah I meant there's thousands of them.






































Kidding...
Ok so maybe 97 onwards.

[shane1992]

Sweet as then, I got told the gti fly wheel is lighter then the 1.3 zook flywheel?

[matty_wall]

shane1992 wrote:

Sweet as then, I got told the gti fly wheel is lighter then the 1.3 zook flywheel?

Apparently they are but i didnt notice any real difference when i swapped mine over. The main difference between my sierra and GTI one was that my GTI flywheel was flat and the sierra one wasnt.

[masterA]

You can't interchange the fly wheels
You have a sierra flywheel in there

[UBZ]

masterA wrote:

You can't interchange the fly wheels
You have a sierra flywheel in there

A Mk1 gti flywheel can be used . they are thinner and lighter than the 13a ones.
most people use The 13a flywheel for a little more low down tourqe.