[-QIK-]

A few days ago I came across some pictures of a bolt on fabricated sill for the Jimny, it replaces the plastic.

I am ripping my hair out trying to find it again. These looked similar to the ones that go on a sierra.

Any ideas please?

Cheers,

Rob.

[Birdman1985]

Its a foreign website. He fabbed them up himself.

ahhh, i knew i had it in my bookmarks somewhere

http://forums.offipalsta.com/showthread ... ight=jimny

[Joe]

atari4x4 wrote:

Jezza86 wrote:

:D Ball should make you some sliders
2 pairs of them.

you jokers seen these ones? http://www.fts4x4.com/en/products/?meth ... il&aid=666

[Chop]

Thats what we need for the GV's Joe!

[-QIK-]

Joe,

That's them!!!!!

Now to see if I can get some.

[Skippy]

Dis you happen to get a hold of the company QIK ? I sent off a email this morning

[Jameszook]

Thos slider look madbitches

[Skippy]

Dear Sir,

Thanks for your email.

The quotation as below for your reference.
JM2900  Jimny Heavy Duty Side Step (Steel Side Sill Guard)    USD345
Freight via EMS express to Australia                                          USD135
Total amount                                                                              USD480
Transit days: 4-6Just got an email back from fts4x4.

[zukenutter]

I'd like to see some mounting detail pics. Somebody buy a set so we can copy the mounts

[Skippy]

how does the original mount?

[zukenutter]

Onto thin sheet metal tabs.
It looks like it tops into the sill ledge from the top, and I'm guessing underneath uses the pissy tabs.

[Skippy]

might take one off and have a look, was thinking i might take a plastic sill and the photos off the fts4x4 site into a metal fab shop and see if they could replicate them

[zukenutter]

I've been thinking of making something similar, There are also clips that go into the rounded vertical face of the sill behind the plastic which I'm thinking of utilising as well. I think that using face and tabs underneath, plus in from the top should make it strong enough.

Vertical face clip holes



There are also extra unused tabs underneath, the plastic only utilises every second tab.

[Jezza86]

zukenutter wrote:

I've been thinking of making something similar, There are also clips that go into the rounded vertical face of the sill behind the plastic which I'm thinking of utilising as well. I think that using face and tabs underneath, plus in from the top should make it strong enough.

Vertical face clip holes



There are also extra unused tabs underneath, the plastic only utilises every second tab.

didnt you have the ODA sliders?

[zukenutter]

Yeah and they were great but I've done a deal with them to work up my own design
I'll rough up a side as best I can then hand it over to the steel guy.