auszookers.com • View topic - Jimny manual locking hubs

Board index » Talking About Stuff » Suzuki Talk

Jimny manual locking hubs

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

Chris_Staff

Joined: Wed May 21, 2014 4:23 pm
Posts: 26
Vehicle: Suzuki Jimny 2004

Posted: Mon Apr 27, 2015 6:27 pm

So something has obviously stuffed up in the vacuum hubs as the 4wd light flashes. So was just wondering where the best place to buy manual locking hubs is?? TIA

Mike57

az supporter

Joined: Fri Jul 22, 2011 11:09 am
Posts: 1009
Location: Melbourne
Vehicle: Suzuki Jimny 2009

Posted: Mon Apr 27, 2015 7:37 pm

You can fit Sierra hubs and you can either grind off the ring or use the Ben T adaptors. If you use the adaptor you can still go back to the original hubs if you ever wanted to do that. You also need to then block off both the vacuum lines going to the front hubs. That way the light will stop flashing. This is probably the most common modification for a Jimny with vacuum hubs.

Chris_Staff

Joined: Wed May 21, 2014 4:23 pm
Posts: 26
Vehicle: Suzuki Jimny 2004

Posted: Mon Apr 27, 2015 7:54 pm

Ok, what about the avm hubs, where can I get them?

Jezza86

Platinum Supporter

Joined: Tue Dec 06, 2011 9:30 am
Posts: 2155
Location: Nhulunbuy 0880
Vehicle: 2010 jimny

Posted: Mon Apr 27, 2015 8:41 pm

http://www.jimnybits.co.uk/shop/jimny/d ... od_33.html
terrain taimer in au also stock them.

_________________
your daily dose of questionable sanity

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 388 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum