| Author |
Message |
Ashley
Joined: Sun Mar 04, 2007 10:30 pm Posts: 299 Location: Ballarat
|
 Posted: Sat Mar 31, 2007 2:30 am |
|
|
Hey Gang
Found yet another sierra for sale. Its an 88. well i read the ad and he wants $1500 and its regoed till june.
Now i rang him up and he said its actually got no rego anymore, and its missing one of the rear drive shafts. Oh and no rust but we will have to wait and see about that.
So just some questions whats a rear drive fast worth? He said i could drive it in 4WD home. But home it about 150km away would this be a bad thing to do as the speed limit is 110.
I was thinking by the time i buy a permit from vic roads to drive it unregoed. I could just rent a trailer.
_________________ [IMG]http://img.photobucket.com/albums/v711/richmo
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Sat Mar 31, 2007 2:46 am |
|
|
if you're adventurous you can drive it front wheel drive 150ks, . Shane (suzi owner) once broke a axle on his sierra and drove it front wheel drive to work everyday for weeks.
rear drive shaft from Suzisport are about $80 - $100.
88 is a narrow track, so you have to get a narrow track drive shaft. The flanges on each end are slightly different to the wide track flanges.
|
|
|
|
 |
Ashley
Joined: Sun Mar 04, 2007 10:30 pm Posts: 299 Location: Ballarat
|
 Posted: Sat Mar 31, 2007 3:58 am |
|
|
oh yeah so this car will most likely have the one litre engine?
and cause it says or nearest offer. Whats a fair price to offer him? cause he never advertised about having a missing drive shaft or no rego.
_________________ [IMG]http://img.photobucket.com/albums/v711/richmo
|
|
|
|
 |
ZukChiK
Joined: Wed Jul 12, 2006 11:30 pm Posts: 1065 Location: Mt. Gambier, SA
|
 Posted: Sat Mar 31, 2007 5:40 am |
|
Richmond98 wrote: oh yeah so this car will most likely have the one litre engine?
They came out with 1.3's from 85 onwards so could be either. If its a 5 speed then its the 1.3L, 4 speed is 1.0L... Correct me if I'm wrong.
I'd offer him a grand, simply for the fact you'll have to spend money to fix it to make it drivable & get it passed etc and also you would be best off trailering it home.
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Sat Mar 31, 2007 12:15 pm |
|
steve wrote: 88 is a narrow track, so you have to get a narrow track drive shaft. The flanges on each end are slightly different to the wide track flanges.
Casper is on the edge. The change over was about 7th month 88 or there abouts. Casper is a 7/88 with W/T shafts but N/T flanges
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Sat Mar 31, 2007 12:17 pm |
|
yeah i guess we should've mentioned that bit. It's possible it could be a wide track if it was made towards the end of 88
and it'll be a 1.3
|
|
|
|
 |
Nev08
Joined: Fri Jul 14, 2006 11:30 pm Posts: 98
|
 Posted: Sat Mar 31, 2007 12:46 pm |
|
|
yep definitely a 1.3 and could well be a WT
|
|
|
|
 |
oscar
Joined: Thu Jul 06, 2006 11:30 pm Posts: 911 Location: Ipswich
|
 Posted: Sat Mar 31, 2007 2:11 pm |
|
|
i'd offer 1grand tops
JMO
_________________ [img]http://www.nbs4x4club.com/forum/files/thumbs/
|
|
|
|
 |
BLZUK
Joined: Tue Aug 01, 2006 11:30 pm Posts: 359 Location: Mt Gambier S.A
|
 Posted: Sat Mar 31, 2007 3:19 pm |
|
|
I drove mine around in front wheel drive for a while, but only short distances, its certainly very different and i hate front wheel drive cars
|
|
|
|
 |
Ashley
Joined: Sun Mar 04, 2007 10:30 pm Posts: 299 Location: Ballarat
|
 Posted: Sat Mar 31, 2007 11:18 pm |
|
|
yeah well i was planing going to drag race my car tomorrow. but that could have fallen through over a bloody $4 part. Makes me mad. So i might go check it out on sunday.
Oh just a quick question is it hard to find engine numbers?
_________________ [IMG]http://img.photobucket.com/albums/v711/richmo
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sat Mar 31, 2007 11:26 pm |
|
|
on the exhaust side if the block right up the back where the gearbox bolts
will be G13bla bla bla
|
|
|
|
 |
Ashley
Joined: Sun Mar 04, 2007 10:30 pm Posts: 299 Location: Ballarat
|
 Posted: Sat Mar 31, 2007 11:48 pm |
|
|
so 13 stands for 1.3?
_________________ [IMG]http://img.photobucket.com/albums/v711/richmo
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Apr 01, 2007 12:01 am |
|
|
f10 is 1 litre
g13a is old 1.3
G13BA is new 1.3
G16 is 1.6
|
|
|
|
 |
|