| Author |
Message |
zook37
Joined: Thu Dec 28, 2006 10:30 pm Posts: 124 Location: Bundaberg
|
 Posted: Tue Dec 22, 2009 10:41 pm |
|
So the beast has been off the road for the last few weeks, (and still is technically until I get the calmini kit fitted) but Inoticed this week when I took it for a quick drive just to keep her running, that the clutch has gotten particularly bad! It has been giving me grief for 4 months or so, but has obviously finally gotten to the point of no return. Now the gearbox is coming out during the body and suspension lift to replace a leaking rear main. But I am reluctant to pay the $$$ for genuine. What aftermarket options are around for a 99 2.5 litre V6 GV?
Cheers
Brett 
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Tue Dec 22, 2009 11:01 pm |
|
Here ya go, Exedy make one, theyre a decent brand.
EXEDY
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Dec 22, 2009 11:25 pm |
|
PJ.zook wrote: Here ya go, Exedy make one, theyre a decent brand. EXEDY
From personal experience with this brand I would rather get one from the dump!!!
4 in a row, the worst was 7k before the pressure plate gave up.
CI do brilliant sdt replacement clutch's, thay also do a 4by kit but not for a Gv, Yet.
But i am talking to them about this matter. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Wed Dec 23, 2009 12:01 am |
|
|
Each to theyre own i guess, ive never had a problem with Exedy, nor have the blokes at work.
|
|
|
|
 |
gvzookdriver

az supporter
Joined: Mon Apr 13, 2009 11:30 pm Posts: 1833 Location: Brisbane
Vehicle: Sold zuk got a Bt50
|
 Posted: Wed Dec 23, 2009 12:08 am |
|
|
YAY more after market stuff for the GV
_________________ bt50 now but still love the zooks
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Wed Dec 23, 2009 12:13 am |
|
beginner4x4 wrote: YAY more after market stuff for the GV
Don't get to excited, the market is very small, they may not do them yet.
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Wed Dec 23, 2009 12:15 am |
|
PJ.zook wrote: Each to theyre own i guess, ive never had a problem with Exedy, nor have the blokes at work.
I know guy's that run them in street car's with no problem's.
Std seem to do the job in 4by's, but sport's toff don't .
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
gregdixon

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 1017 Location: Perth
Vehicle: 2004 SQ625 GV
|
 Posted: Wed Dec 23, 2009 12:28 am |
|
|
I fitted a Clutch Industries RPM clutch when I replaced my rear main. Have only been on two runs with it so far but it spins the brand new 245/70R16 tyres with out slipping.
|
|
|
|
 |
gravity_powered
Joined: Tue Aug 26, 2008 11:30 pm Posts: 348 Location: Adelaide Hills
|
 Posted: Wed Dec 23, 2009 6:44 pm |
|
|
I don't know what brand it is but my mechanic put a so called heavy duty clutch in mine and it is shithouse!
It has been in there for about 10 000km and it only needs a little bit of pressure on the pedal to start slipping.
The factory clutch felt pretty good in my opinion.
|
|
|
|
 |
gregdixon

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 1017 Location: Perth
Vehicle: 2004 SQ625 GV
|
 Posted: Wed Dec 23, 2009 8:15 pm |
|
He might of left greasy hand prints on it 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Wed Dec 23, 2009 11:08 pm |
|
gravity_powered wrote: I don't know what brand it is but my mechanic put a so called heavy duty clutch in mine and it is shithouse!
It has been in there for about 10 000km and it only needs a little bit of pressure on the pedal to start slipping.
The factory clutch felt pretty good in my opinion.
I know that feeling very well!
Suzuki's clutch's are brilliant, friggen exy tho. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
gravity_powered
Joined: Tue Aug 26, 2008 11:30 pm Posts: 348 Location: Adelaide Hills
|
 Posted: Sat Dec 26, 2009 12:49 am |
|
gregdixon wrote: He might of left greasy hand prints on it 
Or I might have, I helped him put it in
Getting the earth cable stuck between the bellhousing and the block is a trap for young players that we discovered about the hard way. 
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sat Dec 26, 2009 12:54 am |
|
I've cut a wiring harness in the same spot, not on a Gv, but still annoying!! 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
|