| Author |
Message |
mike.knew

az supporter
Joined: Sun Nov 16, 2008 10:30 pm Posts: 201 Location: Port Macquarie
Vehicle: SV420
|
 Posted: Fri Oct 02, 2009 12:20 am |
|
Hi Guys,
When I try to get out of my car (from the drivers side) I find that I really have to yank on the door handle to get the latch to pop so I can open the door and I think it is getting worse.
I was wondering if anyone else has had a similar problem and if new door handles like those on ebay may help or are they for broken/snapped door handles like what can happens on the tail gate:
SUZUKI VITARA INNER DOOR HANDLE NEW
It seems as though part of the linkage is too long between the handle and the door latch.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Fri Oct 02, 2009 12:50 am |
|
www.suzistore.com.au/
try these guy`s to, that bit between the handle & the lock is a rod, just bend it a bit.
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
mike.knew

az supporter
Joined: Sun Nov 16, 2008 10:30 pm Posts: 201 Location: Port Macquarie
Vehicle: SV420
|
 Posted: Fri Oct 02, 2009 1:03 am |
|
steknig wrote: www.suzistore.com.au/ try these guy`s to, that bit between the handle & the lock is a rod, just bend it a bit.
That sounds like the go - that's like exactly what it needs. When I bought her I asked the bloke that had her before "has this car got child locks on the drivers door"?
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Fri Oct 02, 2009 1:09 am |
|
|
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
mike.knew

az supporter
Joined: Sun Nov 16, 2008 10:30 pm Posts: 201 Location: Port Macquarie
Vehicle: SV420
|
 Posted: Wed Oct 28, 2009 2:43 am |
|
Had the phone near my pc so here are some pics. I just bent the rod a bit and now the door opens easy. I had the latch lined up to the screw hole so you can see the original wear mark from the original location of the rod. It was pretty soft actually or I was strong that day 
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Wed Oct 28, 2009 12:44 pm |
|
|
1 Word.
Lubrication.
I did this to everything moving in my doors etc. Oh so much better to lock and open..My 77 Rolla did this too..And evetually the fuel cap lock did it so i couldnt fill with petrol! So i sprayed the fook outa it, now its beautiful to open!
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Oct 28, 2009 1:31 pm |
|
BlueSuzy wrote: 1 Word.
Lubrication.
I did this to everything moving in my doors etc. Oh so much better to lock and open..My 77 Rolla did this too..And evetually the fuel cap lock did it so i couldnt fill with petrol! So i sprayed the fook outa it, now its beautiful to open!
x2 silicone spray in the latch fixed mine
_________________ You're just hating because you don't understand
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Wed Oct 28, 2009 2:02 pm |
|
atari4x4 wrote: BlueSuzy wrote: 1 Word.
Lubrication.
I did this to everything moving in my doors etc. Oh so much better to lock and open..My 77 Rolla did this too..And evetually the fuel cap lock did it so i couldnt fill with petrol! So i sprayed the fook outa it, now its beautiful to open! x2 silicone spray in the latch fixed mine
Yep i used silicone spray as it wont harm any rubber parts. Works a treat in the window channels too. Oh so much easier winding by hand and for power windows, the motor has an easier time  My civic coupe power windows used to pop out of the track if i didnt used silicone spray. 5x pita!
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
mike.knew

az supporter
Joined: Sun Nov 16, 2008 10:30 pm Posts: 201 Location: Port Macquarie
Vehicle: SV420
|
 Posted: Wed Oct 28, 2009 8:21 pm |
|
|
My passenger side window seems to be a bit sticky and I have some silcon spray so I will give that a go soon too.
|
|
|
|
 |
|