[boost=money]

hey every one im wanting to cut my gaurds on my zook, i want to cut it to the top of the crese in the gauards, and to the bottom of the grill. the question is can i remove the whole inergaurd unbolt it of the fire wall and cut it off when i cut the gaurds, is this a bad idea to remove the whole inergaurds? not to worryed about legal or not, i want to fit 33s and move the diff forward with ruf.i tryed sarching but found nothing. thanks

[atari4x4]

seach for virtual lift...

http://auszookers.com/index.php?name=Fo ... rtual+lift

there are some good ones on OL

[zookster666]

Have a look at 31zooks build thred he done a virtual lift on his lwb looked good

[PJ.zook]

You can take it all off and separate it, but just be careful when youre joining the lips back up. I joined the inside guard to the outside guard a little too close to each other near the firewall, so a teeny bit of hammering was needed to get the guard to bolt back up to the firewall.

[zookster666]

That looks neat pj do you have any pics of it finished

[11_evl]

Virtual lift will fit 35$ with hammering and
will just rub with 37$. Need to do a bit more hammering

[boost=money]

is there any disadvantages of removing the whole iner gaurd and cutting the head light bucket out as well? i was going to move the battry to the back and run a brace along the gaurd for strenth as the iner gaurd looks like it suports the gaurd.