| Author |
Message |
squizzytaylor
Joined: Sat Sep 26, 2009 11:30 pm Posts: 381 Location: Bogged near Morisset
|
 Posted: Mon Jan 25, 2010 1:49 pm |
|
|
Hey guys, I have searched the forums to no avail, please direct me in the right direction if Ive missed something.
Is there a definitive list of offsets for std Suzuki rims on here or that someone on here has ?
I screwed up up and bought a set of Chrome coily rims to put on the Jimny and they are offset inwards by about an inch per rim which makes for a very NT Jimny.
Does anyone have a list of offsets covering all 139.7 pcd rims?
Cheers
Geoff
|
|
|
|
|
want33s
az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
Posted: Mon Jan 25, 2010 2:25 pm |
|
|
I believe 1.3 Leafy Sierra(round holes) are the best STANDARD rims for offset.
Lots of aftermarket wheels out there with various offsets..
What offset would you like?
|
|
|
|
|
foolsp33d
Joined: Tue Mar 11, 2008 10:30 pm Posts: 2123 Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..
|
Posted: Mon Jan 25, 2010 2:25 pm |
|
from 'another site'
While it MAY not help you.. im sure the question will raise its head again so it MAY help in someway....
Quote: Model Rim Size Offset Sierra 15' x 5.5" 10P Vitara 15" x 5.5" 25P Vitara 2.0 V6 16" x 6.5" (alloy) Grand Vitara 16" x 7" 5P Jimny 15" x 5.5" 5P Speedy Desert Rat 15" x 6" -3 Speedy Desert Rat 15" x 7" -15 Speedy Desert Rat 15" x 8" -28 Speedy Desert Rat 16" x 7" 0 ROH Trak II 15" x 7" 3P ROH Trak II 15" x 8" -10 King 16" x 7" -13 SUZUKI WHEEL STUD PATTERN 5 ON 5.5" M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK BACKSPAING, CENTRE HOLES AND STUD SIZE) OLD F100'S DIHATSU FEROZA AND ROCKY LADA NIVA KIA SPORTAGE AND SORRENTO (NICE ALLOYS) Helpful link for offset: https://www.rsracing.com/tech-wheel.html
_________________
Roads... Where we're going we dont need Roads....
|
|
|
|
|
squizzytaylor
Joined: Sat Sep 26, 2009 11:30 pm Posts: 381 Location: Bogged near Morisset
|
Posted: Mon Jan 25, 2010 2:30 pm |
|
want33s wrote: I believe 1.3 Leafy Sierra(round holes) are the best STANDARD rims for offset.
Lots of aftermarket wheels out there with various offsets..
What offset would you like?
Thanks for the reply want33's, ideally I just want a set of standards to put some more aggressive rubber on, but most wreckers seem to charge double and a half at best for anything jimny related, secondary to this I want to sell the chromies as they are of no use to me and would like to be able to give correct vehicles that they will and wont fit.
Cheers
Geoff
|
|
|
|
|
squizzytaylor
Joined: Sat Sep 26, 2009 11:30 pm Posts: 381 Location: Bogged near Morisset
|
Posted: Mon Jan 25, 2010 2:33 pm |
|
foolsp33d wrote: from 'another site'While it MAY not help you.. im sure the question will raise its head again so it MAY help in someway.... Quote: Model Rim Size Offset Sierra 15' x 5.5" 10P Vitara 15" x 5.5" 25P Vitara 2.0 V6 16" x 6.5" (alloy) Grand Vitara 16" x 7" 5P Jimny 15" x 5.5" 5P Speedy Desert Rat 15" x 6" -3 Speedy Desert Rat 15" x 7" -15 Speedy Desert Rat 15" x 8" -28 Speedy Desert Rat 16" x 7" 0 ROH Trak II 15" x 7" 3P ROH Trak II 15" x 8" -10 King 16" x 7" -13 SUZUKI WHEEL STUD PATTERN 5 ON 5.5" M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK BACKSPAING, CENTRE HOLES AND STUD SIZE) OLD F100'S DIHATSU FEROZA AND ROCKY LADA NIVA KIA SPORTAGE AND SORRENTO (NICE ALLOYS) Helpful link for offset: https://www.rsracing.com/tech-wheel.htmlThe ones I have are different again foolspeed, according to this list there is only a 5mm difference from Jimny to sierra but there is exactly 20mm difference which lines up with the vitara (unless thats an american site these came from and the Jimny listed is really a sierra?)
Cheers
geoff
|
|
|
|
|
foolsp33d
Joined: Tue Mar 11, 2008 10:30 pm Posts: 2123 Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..
|
Posted: Mon Jan 25, 2010 3:06 pm |
|
|
nope came from 'the other site'... an Aus 4x4 forum.. with a fair bit of zook knowledge.. got a pic of the rims in question Geoff? maybe they been mod'ed or ARE a Vit. rim!?
_________________
Roads... Where we're going we dont need Roads....
|
|
|
|
|
squizzytaylor
Joined: Sat Sep 26, 2009 11:30 pm Posts: 381 Location: Bogged near Morisset
|
Posted: Mon Jan 25, 2010 3:17 pm |
|
foolsp33d wrote: nope came from 'the other site'... an Aus 4x4 forum.. with a fair bit of zook knowledge.. got a pic of the rims in question Geoff? maybe they been mod'ed or ARE a Vit. rim!?
Apparently std of a limited edition 96 or so sierra.
|
|
|
|
|
foolsp33d
Joined: Tue Mar 11, 2008 10:30 pm Posts: 2123 Location: Deep Inside Jamies Mouth
Vehicle: Clown Car..
|
Posted: Mon Jan 25, 2010 3:24 pm |
|
|
OOO certainly shiney! spewin cant help ya out more bloke. someone will pipe in with some more knowledge im sure..
_________________
Roads... Where we're going we dont need Roads....
|
|
|
|
|
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
Posted: Mon Jan 25, 2010 3:40 pm |
|
foolsp33d wrote: OOO certainly shiney! spewin cant help ya out more bloke. someone will pipe in with some more knowledge im sure..
They are Coily Sierra rims off a Sierra "Surf" model. I have a set and i've seen them on a lot of 1997/98 coilies, usually with options like metallic paint.
|
|
|
|
|
squizzytaylor
Joined: Sat Sep 26, 2009 11:30 pm Posts: 381 Location: Bogged near Morisset
|
Posted: Mon Jan 25, 2010 3:51 pm |
|
Reubs wrote: foolsp33d wrote: OOO certainly shiney! spewin cant help ya out more bloke. someone will pipe in with some more knowledge im sure.. They are Coily Sierra rims off a Sierra "Surf" model. I have a set and i've seen them on a lot of 1997/98 coilies, usually with options like metallic paint. Thanks Reubs, so this offset (25p) apparently fits coilies and Vitaras but has too much offset for leaf sprung sierras and Jimnies.
Thanks all for your help.
Squizz
|
|
|
|
|
Junior_91
Joined: Tue Mar 17, 2009 10:30 pm Posts: 1084 Location: Ipswich
|
Posted: Tue Jan 26, 2010 3:05 am |
|
|
Got 2 sets of standard wheels mate if you want some standard sierra/ jimny ones
_________________
TWIN LOCK IT & JUST DRIVE!
|
|
|
|
|
cj_zuki
Joined: Sun Sep 10, 2006 11:30 pm Posts: 110
|
Posted: Tue Jan 26, 2010 3:31 am |
|
foolsp33d wrote: from 'another site'While it MAY not help you.. im sure the question will raise its head again so it MAY help in someway.... Quote: Model Rim Size Offset Sierra 15' x 5.5" 10P Vitara 15" x 5.5" 25P Vitara 2.0 V6 16" x 6.5" (alloy) Grand Vitara 16" x 7" 5P Jimny 15" x 5.5" 5P Speedy Desert Rat 15" x 6" -3 Speedy Desert Rat 15" x 7" -15 Speedy Desert Rat 15" x 8" -28 Speedy Desert Rat 16" x 7" 0 ROH Trak II 15" x 7" 3P ROH Trak II 15" x 8" -10 King 16" x 7" -13 SUZUKI WHEEL STUD PATTERN 5 ON 5.5" M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK BACKSPAING, CENTRE HOLES AND STUD SIZE) OLD F100'S DIHATSU FEROZA AND ROCKY LADA NIVA KIA SPORTAGE AND SORRENTO (NICE ALLOYS) Helpful link for offset: https://www.rsracing.com/tech-wheel.htmlWhen I put that list together I didn't have any info on coily Sierra's. The rims pictured were also fitted to Vitara's. I had them on my first Vit which was purchased new not long after they were released in another market so that would back up the 25P offset that they have.
|
|
|
|
|
|
