[31zook]

My carby is so damn annoying, why can't the stupid goveronment let me put injection onto my motor...

anyway, i have an issue where if i have my foot plated it fills the bowl and won't stall, and if i take my foot off all of the sudden it will keep filling the bowl and not stalling, but if i cruze along and have my foot keeping speed with the motor i.e. not speeding up not slowing down. it will drain the bowl and stall. I look like a tool driving really fast up to cars in front and then backing off. So without going to the carby shop im wondering if i have a vacume line on wrong or there is a set jet that fills it at that spot i need to clean, or what i dunno.... just want it fixed

cheers

It's a stock G13A for the record with a standard 1.3 carby

[mightymouse]

check that there is not a problem with the needle and seat.

[31zook]

ok, ill pull it off and check everything again, im sure it's something really simple it's just just finding it....

cheers mightymouse

[shep]

hit it with a hammer.

[31zook]

tried that, now the tin air cleaner won't seal...

[MacDaddy]

Have you checked the fuel pressure at all ?
Or it could be the float getting stuck, and not letting fuel in...
Its sounds like a fuel restriction somewhere...

[31zook]

awesome great insight. i pulled the hose off the carby and kicked it then fuel sprayed everywhere.. is that what you ment?

[joeblow]

1.6 carby it..............

[31zook]

hmm maybe on my next motor... i need this car as my DD