auszookers.com • View topic - Wrecking Black 00' Jimny Nsw

Board index » Shift It And Find It » Getting rid of stuff

Wrecking Black 00' Jimny Nsw

Page 1 of 6

[ 154 posts ]

Go to page 1, 2, 3, 4, 5, 6 Next

Print view

Previous topic | Next topic

Author

Message

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Feb 15, 2010 5:33 pm

ITEM: 2000 Model Jimny JLX Black

CONDITION:Alot of parts excellent

REASON FOR SELLING:Damaged

PRICE AND PRICE CONDITIONS:
All parts are perfect unless stated otherwise.

Parts listed is what i have left.

PICTURES:
I have pictures for alot of parts. Just Pm

_________________

BlueSuzy wrote:

I'm over the G16b's.

Last edited by BlueSuzy on Sun Nov 20, 2016 2:17 pm, edited 53 times in total.

zooker

az supporter

Joined: Sun Aug 06, 2006 11:30 pm
Posts: 596
Location: Queanbeyan

Posted: Mon Feb 15, 2010 9:49 pm

Let me know if you decide to sell the engine/gearbox setup. Would suit my comp car quite nicely

_________________
Member of C.O.R 4x4

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Feb 16, 2010 2:07 am

ok. I am marking where/what all the wires are for. And keeping it as a whole harness, so if need be, a full wire harness swap can be acheived with minor difficulty. Then just needs adaptions to sierra heater controls etc. Unsure about cluster. And ignition swaps for imoboliser..Vss runs in jim transfer..so a vit vss in dash won't work. (from my reasearch) Bit of work. But do'able.

_________________

BlueSuzy wrote:

I'm over the G16b's.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Feb 16, 2010 4:11 am

I've been thinking 1.5k for full conversion.

That is for everything for the whole conversion. From radiator to the end flange of the transfer.

Radiator,engine,4spauto,jackshaft,transfer,Complete marked wiring harness, and tested with the least amount of wiring possible and ecu. Auto pedal configurations,airbox, all chassis mounts cutoff for engine mounts,gbox x member, transfer, throttle cable, auto shifter, cut out gearbox tunnel(unsure if needed), Jimny cluster.

Phew..I'm sure there is more!!:lol:

Pretty much a full 1/2 cut.

Sounds expensive... But your getting alot of shit there!

_________________

BlueSuzy wrote:

I'm over the G16b's.

Last edited by BlueSuzy on Tue Feb 16, 2010 6:33 pm, edited 1 time in total.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Feb 16, 2010 6:20 pm

_________________

BlueSuzy wrote:

I'm over the G16b's.

Last edited by BlueSuzy on Sun Feb 21, 2010 9:15 pm, edited 1 time in total.

gvzookdriver

az supporter

Joined: Mon Apr 13, 2009 11:30 pm
Posts: 1833
Location: Brisbane
Vehicle: Sold zuk got a Bt50

Posted: Tue Feb 16, 2010 8:24 pm

i know zooknutter was looking for an end cap for 1 of the roof rails

_________________
bt50 now but still love the zooks

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Feb 24, 2010 5:05 pm

Come get em!

_________________

BlueSuzy wrote:

I'm over the G16b's.

Last edited by BlueSuzy on Fri Apr 27, 2012 11:01 am, edited 2 times in total.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Wed Feb 24, 2010 6:10 pm

center concole? handbreak cover thing?

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Feb 24, 2010 6:25 pm

Yes! I was thinking of keeping it. But i think i will sell it.

This centre console, 2 cupholders, but 1 cupholder is taken up by a bolton arm rest with a little storage compartment. Will show a pic tonight/tommorrow! It only is a cupholder/handbrake cover. Jimny's don't have a full console like cars.

ps. I thought coily's had cupholders?

_________________

BlueSuzy wrote:

I'm over the G16b's.

pyrosian

Joined: Thu Aug 27, 2009 11:30 pm
Posts: 8
Location: Out Wheel\'n!!

Posted: Sun Feb 28, 2010 2:33 am

Would you be willing to part with the rear headrests? I'm in need of two...

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sun Feb 28, 2010 4:43 pm

Sorry but Jim didnt come with any! They were missing..Like the seat collapsing knob pullers..

_________________

BlueSuzy wrote:

I'm over the G16b's.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Mar 01, 2010 12:39 am

nope no concle in mine..

yeah man can u grab pic? what u asking?

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Mar 01, 2010 1:17 am

$25 + Postage? What ever that will be. Unsure what sizes aus post allows.

_________________

BlueSuzy wrote:

I'm over the G16b's.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Mar 01, 2010 1:24 am

aus post are pretty good, i've had vitara front diffs housings sent from QLD to SA for less than $50... from memory they go off weight not size.

_________________
You're just hating because you don't understand

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Mar 01, 2010 2:00 am

Ah ok. I havent posted much other than letters..or cards..

If i need to downsize it it is simply unscrewable to adjust into a smaller box.

_________________

BlueSuzy wrote:

I'm over the G16b's.

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Mar 06, 2010 6:22 pm

pretty sure they have a 20kg limit so youll be fine.i sent a swb soft top from tamworth to gold coast for $17 just folded flat but failry big still.

You have some cool gear there mate

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sat Mar 06, 2010 6:28 pm

Ah dont worry. Fooking timewasters. :roll:

Cool gear yes!

Thinking of Jimny Aircon with jimny heaterbox in my sierra. Yes! :lol:

i have no aircon and my heater core leaks.. :cry:

_________________

BlueSuzy wrote:

I'm over the G16b's.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Sun Mar 07, 2010 5:12 pm

i will take concole..

can u do for $35 posted?

sorry forgot all about this!

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sun Mar 07, 2010 5:38 pm

Ok,

I will see how much postage is with weight/size etc. Pm me your address!

_________________

BlueSuzy wrote:

I'm over the G16b's.

Crunched

Joined: Fri Mar 05, 2010 10:30 pm
Posts: 684
Location: Sth Bris
Vehicle: Sierra Utey!

Posted: Sun Mar 07, 2010 10:54 pm

What's included with the aircon setup and how much you want for it?

_________________
My ute..

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Mar 08, 2010 2:52 pm

BlueSuzy wrote:

Thinking of Jimny Aircon with jimny heaterbox in my sierra.

_________________

BlueSuzy wrote:

I'm over the G16b's.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Mar 09, 2010 5:17 am

Price Drop. Stuff needs to dissappear!

Not posting the console. Can't be farked. So either pick up or i'll keep.

_________________

BlueSuzy wrote:

I'm over the G16b's.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Mar 16, 2010 1:04 am

Bump and edited!

_________________

BlueSuzy wrote:

I'm over the G16b's.

jimnstar

Joined: Wed Aug 12, 2009 11:30 pm
Posts: 58
Location: Penrith.nsw

Posted: Thu Mar 18, 2010 8:00 pm

Hey tim
Have you still got the jimny rear bumper.
cheers Dan

known2

Joined: Mon Feb 08, 2010 10:30 pm
Posts: 14
Location: gold coast

Posted: Fri Mar 19, 2010 1:06 am

i'd like to buy the power steering but its just to far to come pick up.

_________________
86 lwb trayback, soa 33's. 1.6 armstrong stearing.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Mar 19, 2010 3:51 am

You guys have PM's!

Also. Possible QLD road trip next month, Full anzac week hopefully staying! Can bring small/medium size parts to Gold Coast, and maybe further to Sunshine Coast to Crikey Zoo etc!

Could even visa versa for abit of petrol money!

Drop off to me, and receiver pickup from mine!

Next trip, vic,sa,wa,nt,tas,act again not :lol:

_________________

BlueSuzy wrote:

I'm over the G16b's.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Mar 31, 2010 3:05 pm

Updated

_________________

BlueSuzy wrote:

I'm over the G16b's.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sun Apr 11, 2010 11:15 pm

Can't wait for my holiday! Updated! Psteer Lowered! $600

_________________

BlueSuzy wrote:

I'm over the G16b's.

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Mon Apr 12, 2010 12:06 am

Are you keeping the front radius arms? If not, what are you
asking for em?

_________________
Own a weird looking coily sh!tbox!

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9715
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Mon Apr 12, 2010 12:55 am

I was keeping them, but now may use rears up front.

Whats your offer?

_________________

BlueSuzy wrote:

I'm over the G16b's.

Page 1 of 6

[ 154 posts ]

Go to page 1, 2, 3, 4, 5, 6 Next

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 30 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum