[steak_knife]

zuk94 wrote:

royce wrote:

Stekky they are -13 not 28, somebody cant work a tape and maths
I have same, with 235's they use every bit of my 50mm clark rubber flares

Brakes will be fine, its the later widebody ones and GV's with the different rotor offset thats trouble

Not saying for sure your wrong Royce , as I have Kings with a -13 offset on my Vitara LWB and from what I've seen the F100 rims have a greater offset again. Mine only just sit proud of the guards . Mine are also 15inch rims and the calipers needed a little grinding whereas the F100 rims didn't need the grinding.
Not sure if this is relavant but I can get photo's and check measurements if needed.

He was referring to the pic I posted, since talked to the owner of said car & he said thay are -15's

[christover1]

Having me 31's fitted to some 15 x 7's with a -12 offset.
Hope I did my maths right, picking them up today sometime.
Hoping they fill the flare extensions nicely.
Will take pix and put them up later.

christover

[steak_knife]

& with out having go to say it, but cause I'm a post whore I will,

WE WILL REQUIRE PIC'S!!!!

[christover1]

steknig wrote:

& with out having go to say it, but cause I'm a post whore I will,

WE WILL REQUIRE PIC'S!!!!

I will require some sunglasses now, or eye surgery
thats very yellow

[steak_knife]

christover1 wrote:

steknig wrote:

& with out having go to say it, but cause I'm a post whore I will,

WE WILL REQUIRE PIC'S!!!!

I will require some sunglasses now, or eye surgery
thats very yellow

It's the buttercup effect, everything around me is turning Yellow.

[christover1]

Wheels n tires fit very nicely.
Lifted the spare wheel carrier to fit the first ever matching spare I ever had
And need to trim some plastic and move mud flaps back a tad, but all good.

[89_tintop]

they are a really good fit..

completely change the look of the car.

[steak_knife]

Looking good, much scrubbing in the rear??

[christover1]

steknig wrote:

Looking good, much scrubbing in the rear??

Only scrubbing on the bolt I used to attach mud flap to flares...but I will do some plastic trimming there, and move flaps away from wheels...

[steak_knife]

christover1 wrote:

steknig wrote:

Looking good, much scrubbing in the rear??

Only scrubbing on the bolt I used to attach mud flap to flares...but I will do some plastic trimming there, and move flaps away from wheels...

I did that to the Gv, the mud flap's are under the house & the Gv's in the front yard..

[christover1]

steknig wrote:

christover1 wrote:

steknig wrote:

Looking good, much scrubbing in the rear??

Only scrubbing on the bolt I used to attach mud flap to flares...but I will do some plastic trimming there, and move flaps away from wheels...

I did that to the Gv, the mud flap's are under the house & the Gv's in the front yard..

Yes, been thinkin same thoughts....keep them for just in case