| Author |
Message |
Birdman1985

az supporter
Joined: Wed Jan 27, 2010 10:30 pm Posts: 651 Location: Rutherford,NSW
|
 Posted: Mon Mar 29, 2010 11:32 pm |
|
|
When i smash my car up/down dues. Which i currently do on a regular basis i am hearing a loud scraping sound when i go up or level out at the bottom.
Is this from the front bumper bottoming out or is it the stock shockies looking for a little more travel?
There hasn't been any sand on the bumper but i have noticed that where the front side panel meets the wheel guard there is a chunk of plastic (by chunk i mean 1cm cube??? but i like my car neat)
Sorry i know it is a dull and idiotic question but i cant watch my stockies and drive at the same time.
Mitch.
|
|
|
|
 |
93zook
Joined: Wed May 27, 2009 11:30 pm Posts: 699 Location: perth
|
 Posted: Mon Mar 29, 2010 11:33 pm |
|
|
before others get in i will say... what car have you got?
|
|
|
|
 |
wyt91t
Joined: Tue Mar 24, 2009 10:30 pm Posts: 134 Location: Wakeley
|
 Posted: Tue Mar 30, 2010 12:03 am |
|
|
tyres are scrubbing out against the body
|
|
|
|
 |
shandy92

az supporter
Joined: Tue Nov 25, 2008 10:30 pm Posts: 5066 Location: perth, Australia
|
 Posted: Tue Mar 30, 2010 1:53 am |
|
wyt91t wrote: tyres are scrubbing out against the body
X2
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Tue Mar 30, 2010 1:55 am |
|
93zook wrote: before others get in i will say... what car have you got?
i THINK it's a Jimny?
_________________ You're just hating because you don't understand
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Mar 30, 2010 3:01 am |
|
Here's a tip. Don't "smash" it up and down dunes. Drive sensibly and you'll be less likely to break shit 
_________________ I want my old sig back 
|
|
|
|
 |
zookfun
Joined: Sat Jun 06, 2009 11:30 pm Posts: 203 Location: SA
|
 Posted: Tue Mar 30, 2010 4:20 am |
|
nah, go hard! Its way more fun! 
|
|
|
|
 |
|
tommop
|
 Posted: Tue Mar 30, 2010 4:22 am |
|
|
*turns off tips for OP*
the first thing you should ALWAYS do on a computer...they never really help
...i'd go with tyres scrubbing also...I have had a few cars where the springs themselves are noisy when working hard but generally it doesnt sound like you described
|
|
|
|
 |
Birdman1985

az supporter
Joined: Wed Jan 27, 2010 10:30 pm Posts: 651 Location: Rutherford,NSW
|
 Posted: Tue Mar 30, 2010 3:11 pm |
|
|
Yeah sorry guys. It is a manual 99 Jimny. Some of the dunes i am seeking to dominate aren't the sort of hills you can dawdle up. Somewhat similar to "The Bowl" featured on YouTube.
But thanks alot...shockies search underway.
Mitch.
_________________ Mitch.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Mar 30, 2010 5:44 pm |
|
|
If it is tyres on bumper, like everybody has suggested, and I agree, then shockies won't make any difference at all. You need to work on tyre clearance and shockies will do nothing for this.
_________________ I want my old sig back 
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Mar 30, 2010 5:46 pm |
|
_________________ I want my old sig back 
|
|
|
|
 |
MrRocky
Joined: Thu Dec 17, 2009 10:30 pm Posts: 4731 Location: perth
|
 Posted: Tue Mar 30, 2010 11:11 pm |
|
i think he's refering to the type that require a certain amount of run up with obigitory air at the top.
Cmon ben where are the pics of you going up, they all look to be down hill hmmm 
_________________ ...
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Mar 30, 2010 11:16 pm |
|
Well we had to get up there first...
I try not to get air off the top of dunes, sounds stupid I know but I don't wanna destroy my car, but then thats just me
I find if you back off just as you get to the top you roll to a stop on the top of the dune, which gives you a good opportunity to find out whether or not their is a sheer vertical drop the other side before launching yourself over what is effectively a cliff... But again, thats just me....
_________________ I want my old sig back 
|
|
|
|
 |
Birdman1985

az supporter
Joined: Wed Jan 27, 2010 10:30 pm Posts: 651 Location: Rutherford,NSW
|
 Posted: Tue Mar 30, 2010 11:32 pm |
|
|
No i don't want to get air that is something that will definitely not happen in The Cricket. But sorry they are a little steeper than that. Most are half wash outs. I was looking at a 40mm if not more lift in it when i do get them so i can get larger (225/235) wheels put on.
Mitch.
_________________ Mitch.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Mar 30, 2010 11:35 pm |
|
|
Also bear in mind that even when you put lifted springs in, the suspension still flexes upwards just about as far, so larger tyres will just give you more scrubbing issues...
I'm not familiar with the ins and outs of lifting coils and spacers and all the rest of it, but I'd imagine if your stock tyres are scrubbing then bigger ones will only scrub worse...
_________________ I want my old sig back 
|
|
|
|
 |
Birdman1985

az supporter
Joined: Wed Jan 27, 2010 10:30 pm Posts: 651 Location: Rutherford,NSW
|
 Posted: Tue Mar 30, 2010 11:44 pm |
|
|
Yeah i am aware of that too thanks Ben, but hopefully the new tyres will be better suuited to the application, a run up will not be required and that little bit of lift will supply me with a little bit of extra comfort room.
Mitch.
_________________ Mitch.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Tue Mar 30, 2010 11:47 pm |
|
|
The tyres without gearing to match will make it even worse... you'll be geared too high...
_________________ I want my old sig back 
|
|
|
|
 |
|