[jakeroberts]

Pm sent

[BUZOOKA]

hey jas im after the little peice that screws in to the thermostat housing that give the temp readings as mine has broekn giving me hay wire temp readings


cheers buzzy

[whincup]

still have the driveshaft from between transmission and t-case? wat condition is it in?

[want33s]

BUZOOKA wrote:

hey jas im after the little peice that screws in to the thermostat housing that give the temp readings as mine has broekn giving me hay wire temp readings
cheers buzzy

They all break... Buy a new one at Supercrap for $15.

whincup wrote:

still have the driveshaft from between transmission and t-case? wat condition is it in?

NT or WT????

[wobb]

gday jas
Thanks for the alt i got off you the other day. The car looks heaps better.

Anyway today Im looking for a windscreen, the 2 indicator lights that go on the wings, and a rear half shaft (RHS) together with the backing plate. For the last one I really need the backing plate and the little spacer that sits next to the wheel bearing, but the whole thing ie the shaft with the plate still on it would do just fine.

All to suit a 85 sierra.
many thanks
wobb 2441

[steak_knife]

This one Jas??

[want33s]

Thats the one... Cheers.

Will work out a price for you tomorrow Wobb.
Jas.

[Fmoss3]

steknig wrote:

This one Jas??

mmm lil bit longer and you got yourself one hot, stretch soft top spooky limo good for weddings on the beach

[whincup]

want33s wrote:

NT or WT????

WT. also need the part that connects the u-joint to the t-case. thats actually the part i need most, but wanting both...

[want33s]

whincup wrote:

want33s wrote:

NT or WT????

WT. also need the part that connects the u-joint to the t-case. thats actually the part i need most, but wanting both...

PM sent.

[want33s]

BRAND NEW MOTORWAY MUD TERRAIN... 30x9.5 Never been used..on a rim $100


Propellor plate quarter corner thingos.. $100.



Alloy bullbar with Bosch lights.... $170


Set of four 15x7" rims with Cooper Discoverer 30x9.5 tyres that are still RWC. Rims are near new and in VGC. $180

[BUZOOKA]

u wouldnt happen to have a sierra boss kit would ya jas??


cheers buzzy

[tanshi]

im pretty sure mazda 121 boss kit will fit too if it helps

[want33s]

tanshi wrote:

im pretty sure mazda 121 boss kit will fit too if it helps

How does that help me sell a steering boss?


PM sent Buzooka

[tanshi]

just trying to be help full to all, i'll keep my trap shut next time

[jomclean]

Set of four 15x7" rims with Cooper Discoverer 30x9.5 tyres that are still RWC. Rims are near new and in VGC. $180.
do you still have the rims and tyers.
wear abouts on the Sunshine Coast are you.

[want33s]

jomclean wrote:

Set of four 15x7" rims with Cooper Discoverer 30x9.5 tyres that are still RWC. Rims are near new and in VGC. $180.
do you still have the rims and tyers.
wear abouts on the Sunshine Coast are you.

Yep still got 'em... Pacific Paradise

[Fmoss3]

mmm thats what i get for not checking this thread more often

if jomclean doesn't get them i'd be interested. i got a set of 30's that are barely legal but i need a set of 7's to fit them on.

if you dont just have wheels i'd be keen on that set if that falls through

thanks

[jomclean]

can you tell me what offset the rims are pleas.

[Fmoss3]

jomclean wrote:

can you tell me what offset the rims are pleas.

umm yeah good point, i kinda assumed these would fit my coily. would that be right?

[want33s]

Fmoss3 wrote:

mmm thats what i get for not checking this thread more often

if jomclean doesn't get them i'd be interested.

I have another set of four rims. Same style, same size, same offset but need paint... $120 the set.

jomclean wrote:

can you tell me what offset the rims are pleas.

They'll fit any standard car. They are currently on a NT Drover and don't scrub anywhere... I'll check the offset tomorrow.

[slusher]

G'day, I am chasing a good condition carby for a 1 litre, do the carbys from the 1.3 fit as well??

[want33s]

slusher wrote:

G'day, I am chasing a good condition carby for a 1 litre, do the carbys from the 1.3 fit as well??

1.3 carbs are downdraught...
1.0 carbs are sidedraught...

NO, 1.3 carb won't fit 1.0.

[Fmoss3]

how many times a day do you get the " does the something something from the 1.3 fit the something something on the 1.0?" ?

[want33s]

Fmoss3 wrote:

how many times a day do you get the " does the something something from the 1.3 fit the something something on the 1.0?" ?

I get 12-15 PM's everyday and 2 or 3 of them are usually "will so & so fit?" but it's OK as I might be able to help someone and sell some of the crap cluttering my yard.

[smileysmoke]

got any standard shackles or ones like yours that are 30mm longer
cheers mate

[want33s]

smileysmoke wrote:

got any standard shackles or ones like yours that are 30mm longer
cheers mate

Got a set of (4) standard shackles but none like mine that are 40mm longer than stock.
Stock =60mm between bolt centres.
Mine = 100mm between bolt centres.

[smileysmoke]

sweet mate ill get the standards off you if i can bud. pm me your price and ill send ya cash.

[want33s]

smileysmoke wrote:

sweet mate ill get the standards off you if i can bud. pm me your price and ill send ya cash.

Yep. Will PM you tomorrow.

[Armpit]

Might be interested in a set of those tyres, depends if they will fit in my car will check them out when I am there on Sunday if that is cool.