It is currently Tue Jul 28, 2026 8:18 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Wed May 27, 2009 11:30 pm
Posts: 556
Location: Newcastle

Post Posted: Mon May 10, 2010 11:09 pm 
Reply with quote Top  
Hey everyone,
I've got a 99 Jimny and its started to handle really shitty in the front end and I've noticed the sway bar moves side to side.
So my question is, is the sway bar supposed to move side to side or is it supposed to be as stiff as a pornstars mangina?
And how easy is to fix?
Cheers

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Mon May 10, 2010 11:14 pm 
Reply with quote Top  
Mangina.

How easy does it move? By hand?

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed May 27, 2009 11:30 pm
Posts: 556
Location: Newcastle

Post Posted: Mon May 10, 2010 11:15 pm 
Reply with quote Top  
Yeah you can move it by hand easily enough

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Aug 30, 2009 11:30 pm
Posts: 2659
Location: hobart tasmania

Post Posted: Tue May 11, 2010 12:04 am 
Reply with quote Top  
well from the sounds of it

its time for it to come out and be replaced with fresh air lol

_________________
-indebt 4x4 club-

nav 32s n winch cust rear

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Tue May 11, 2010 12:11 am 
Reply with quote Top  
side to side movement should not effect its opperation. The swaybar works by limiting torsional loads, not lateral loads.

Just make sure everything is tight and properly secured and drive it. I personally don't like the on-road behaviour of a jimny with no front swaybar. I vote - leave it alone. :D

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
User avatar

Joined: Tue Dec 01, 2009 10:30 pm
Posts: 172
Location: Longford, Tasmania

Post Posted: Tue May 11, 2010 12:36 am 
Reply with quote Top  
I've found Jimny sway bars will tend to creap about 5 to 10mm to one side over time, its not a big deal, but if your noticing a handling problem there maybe other parts of the front suspention which need a look at. take the swaybar off and go for a drive, If the handling is worse than the swaybar is doing its job.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed May 27, 2009 11:30 pm
Posts: 556
Location: Newcastle

Post Posted: Tue May 11, 2010 12:55 am 
Reply with quote Top  
Righto I'll wait to I get me car back in a couple of days and i'll try taking it off and see how she handles.
Cheers

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun Feb 08, 2009 10:30 pm
Posts: 9045
Location: Brisneyland
Vehicle: 2006 Jimny JLX

Post Posted: Tue May 11, 2010 6:06 am 
Reply with quote Top  
be careful though, the car will sway more.

Could just be worn bushes, how many kms has the Jim done?

_________________
Click WWW below for STICKERS

 Profile WWW  

Offline
az supporter
az supporter
User avatar

Joined: Wed May 27, 2009 11:30 pm
Posts: 556
Location: Newcastle

Post Posted: Tue May 11, 2010 7:34 am 
Reply with quote Top  
zukenutter wrote:
be careful though, the car will sway more.

Could just be worn bushes, how many kms has the Jim done?


Since 99 she has done 214,000 klms, since 2 "suspension lift roughly 60,000 klms.
I'm hoping to get her back tomorrow after it get's the rear main seal replaced and I'll check it all out then.
She needs 2 new front shocks I know that but she just doesn't want to handle corners at speed like she used to.It's like she's lazy while turning, a real hand full.
Cheers.

 Profile  

Offline
User avatar

Joined: Tue Dec 01, 2009 10:30 pm
Posts: 172
Location: Longford, Tasmania

Post Posted: Tue May 11, 2010 9:47 am 
Reply with quote Top  
Ok woody, I should have asked questions first. replace the shocks first if you know there already worn out. I get really uncomfortable when the word "fast" is mixed with "Jimny". especially when the word "lifted" is in there too.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 317 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours