[Red_October]

I'm really not overly confident with this sort of stuff. I was wondering if there was anyone on here that has experience with cutting the fat from a 1.6 harness so that it is as close as possible to plug-and-play and if so, could someone do mine for me? I'd also need the plugs and stray wires labelled too. I will pay for your services

Also, am I right in presuming that I just hang on to the wiring behind the dash and in the engine bay and nothing from the front seats back?

Cheers,
Jimmy

[joeblow]

i can do as close as plug and play as is possible. i'm not cheap with looms though....as i don't piss-fart around and i will need a fair few things to do it right.


if you need it just for a manual its $350......


if its for an auto its $450.


note that if you send me your sierra cluster i will graft in the check engine light and the vss.

[royce]

having done pretty surgery on looms before and knowing how quick the bits needed builds up this is quite cheap!!!!

its certainly not a Sunday arvo job

[Red_October]

PM sent Joe.

royce wrote:

having done pretty surgery on looms before and knowing how quick the bits needed builds up this is quite cheap!!!!

its certainly not a Sunday arvo job

Yup, i'd rather leave auto electrical stuff to people who know what they're doing!

[royce]

the last loom I got stuck into, simple remove all the uneeded shit and add in a heap of extra stuff (wasnt suzuki) was my weekends time for near on 3 months, 24 rolls of tape!!!!

[Red_October]

I know if I did it, it would take me two years to modify and once installed, 2 seconds to set the zook on fire

[Fatzook]

royce wrote:

having done pretty surgery on looms before and knowing how quick the bits needed builds up this is quite cheap!!!!

its certainly not a Sunday arvo job

I did mine on a sunday arvo finished at 2am though

[Highway-Star]

Red_October wrote:

Also, am I right in presuming that I just hang on to the wiring behind the dash and in the engine bay and nothing from the front seats back?

Just fuel pump wiring. But thats dead easy compared to the rest


I got one of those industrial paint bucket things, overflowing with the "Fat" I cut from my 1.6 loom

[Red_October]

After removing this lot my head hurt so I went in for lunch. I admire anyone that can make sense of this stuff!

[steak_knife]

Speedo head to, Joe will want that & you car will need it.