[Zookin_85]

Hey fellow Auszookers,

I have a problem my tcase is stcuk in netural as per subject!!

Not to sure if it is a fault anyone has come across but would appriciate
any help i can get.

Cheers Corey

[BUZOOKA]

ther have been many of posts on this subject


usualy doing a search will help u


http://auszookers.com/index.php?name=Search

saves having so many threads on the same subject


cheers buzzy

p.s didnt mean to go grimbo on ya mate

[Zookin_85]

cheers man sorry about that

[whincup]

jst to save some effort, its most likely the shifter sheet. can pick up a genuine one from suzuki for about $20, and google will bring up a way to replace the old one, if you can get whats left of it out...

[lump_a_charcoal]

You can buy the shifter sheets off here too, can't remember who makes them - Steve maybe?

[Shansh]

if your talking about the bush, bruce sells them, i got a gearbox & tcase one off him two weeks ago

[steak_knife]

Shansh wrote:

if your talking about the bush, bruce sells them, i got a gearbox & tcase one off him two weeks ago

I have Bruce's bush to!!!

I got g/box & transfer bush's to, & look ing at em I wouldn't buy a nylon one ever again..

[Zookin_85]

Thanks guys ill have to pull it apart and have a looky then ill have to order one off here if i can.
Thanks fror helping me out.

Cheers Corey.

[89_tintop]

steknig wrote:

Shansh wrote:

if your talking about the bush, bruce sells them, i got a gearbox & tcase one off him two weeks ago

I have Bruce's bush to!!!

I got g/box & transfer bush's to, & look ing at em I wouldn't buy a nylon one ever again..

haha
haha


bruce's bush...

[Shansh]

steknig wrote:

Shansh wrote:

if your talking about the bush, bruce sells them, i got a gearbox & tcase one off him two weeks ago

I have Bruce's bush to!!!

I got g/box & transfer bush's to, & look ing at em I wouldn't buy a nylon one ever again..

bruces bush is very popluar

[lukes_89]

i have one that im fitting right now lol ever one said its easy i disagree hahaha its easy just time consuming i ended up dropping my case out

[whincup]

lukes_89 wrote:

i have one that im fitting right now lol ever one said its easy i disagree hahaha its easy just time consuming i ended up dropping my case out

serious??? lol, each to their own i guess... some people prefer long and easy, then some people like me are too lazy, just do it the quickest way possible... either way, best not to do it with a swear jar anywhere near...

[lukes_89]

whincup wrote:

lukes_89 wrote:

i have one that im fitting right now lol ever one said its easy i disagree hahaha its easy just time consuming i ended up dropping my case out

serious??? lol, each to their own i guess... some people prefer long and easy, then some people like me are too lazy, just do it the quickest way possible... either way, best not to do it with a swear jar anywhere near...

i went at mine for a couple of hours with it in the car it wasnt the long hard way choice it was it was being a stubborn basted, if i had a swear jar near id be in allot of debt. i also found i was putting my gear box bush in the transfer which didnt help at all . but i recommend doing both bushes, dosnt take that long the longest part was actually getting the cap you push down on off the rest took 5 mins. if you could get the cap off quick i recon you could do both bushes in about 15mins. also i used bruces bushes they are excellent and cheap.

[whincup]

lukes_89 wrote:

if you could get the cap off quick i recon you could do both bushes in about 15mins.

this was definitely the only part i didnt like. i just used a large flathead screwdriver to push down on it, and another smaller one to push the other side and twist at the same time with the smaller one... probably doesnt make sense, but i know what i meant...

[steak_knife]

whincup wrote:

lukes_89 wrote:

i have one that im fitting right now lol ever one said its easy i disagree hahaha its easy just time consuming i ended up dropping my case out

serious??? lol, each to their own i guess... some people prefer long and easy, then some people like me are too lazy, just do it the quickest way possible... either way, best not to do it with a swear jar anywhere near...

Undo the 4 bolt's on the jack shaft & you'll have heap's of room..

[lukes_89]

whincup wrote:

lukes_89 wrote:

if you could get the cap off quick i recon you could do both bushes in about 15mins.

this was definitely the only part i didnt like. i just used a large flathead screwdriver to push down on it, and another smaller one to push the other side and twist at the same time with the smaller one... probably doesnt make sense, but i know what i meant...

i done mine opposite used the big sucker to twst it and the smaller one to push down and you know whats even easier steky remove the whole case 15bolts and your done

[anDy86]

hey guys

My bushes are comepletly stuffed, can anyone let me know how to contact bruce? Can i have a PM name?

Cheers

[eldo]

maybe just type in "bruce"

[steak_knife]

http://auszookers.com/index.php?name=Yo ... &profile=6

There he is!!!

[Bruce]

[steak_knife]

Bruce wrote:

:-)

Found him!!!


You got nice bush Bruce, fitted the front's, very nice..

[anDy86]

Thanks steknig!

Wasn't sure if you guys were refering to forum name or his real name. i guess in this case both

will shoot Bruce a PM about Bruce's Bushes

[steak_knife]

anDy86 wrote:

Thanks steknig!

Wasn't sure if you guys were refering to forum name or his real name. i guess in this case both

will shoot Bruce a PM about Bruce's Bushes

You'll like his bush..

I just fitted front shackle bush's he made, very nice I must say, yet to wheel on em, but much gooder on road..

[Bruce]

Glad ya happy with me bush (or bushes lol) post whore opssssssss I mean steknig

[steak_knife]

Bruce wrote:

Glad ya happy with me bush (or bushes lol) post whore opssssssss I mean steknig

Was good to meet you to, I imagined your factory to be bigger.