[holdenrules]

Ok so its time to get rid of all my sierra gear i have got sitting around and my projects as i have got to many on the go.

I have sierra carbies, heaps of tailshafts off long wheel bases and a sierra bullbar, g13ba block complete bottom end.

Now the car - (1994 model wt) i have a sierra that was used on a property that was rolled not bad but everything is there minus the whole drive train and chasis as i used this on my other one i am selling as well. does come with a chasis though that has the fuel tank and that still attached. this car has a home made rollbar in the rear, has a complete airconditioning system still in it

Project sierra. (1994 model wt) Stripped back short swb and put a wall up with a window into it for a mini tub / ute conversion. car has a old model front end on it with the wt flares welded on. this has a 2 inch body lift in it. and is rolling with transfer case and everything in it still. i have got everypart there if not more to make this car complete again. has had all dints removed and is mainly all in prime ready to paint, also has a shaved rear tailgate with all soft holes filled around tub. all the chassis has been sprayed in chasis black. i have stock as well as checker plate door trims for it as well. only thing missing is seats. custom rear bar made with holes cut out to accomadated lead lights, and a spare wt complete front diff for it as well.

Engine for the project.
I never got around to finishing off the build of the engine but i have bought most if not all parts for the rebuild. the engine is fully striped down ready for he rebuild. now what it has.
1.6 vitara motor bored out 40 though, honda pistons to suit to lower the comp to 8:1 for the blow thru set up that i was going to do. pistons are brand new with rings that were oreded from the states to handle up to 300hp. brand new big end and little end bearings and a full gasket rebuild kit. A 1.6 head that has been ported and polished with the head shaved. also have a stock 1.3 head to go with it. A custom stainless steel turbo manifold for a high mount turbo setup. xf carby also there for the blow thru. Fully rebuilt ihi rhb5 turbo.
i probably have missed a fair few parts as there is to many to list. i would of like to have finished it but just dont have the time as well as having to other cars to fix.
I WILL NOT SEPERATE SELLING AS A PACKAGE
i will get pics up asap of most stuff. price $2300

[want33s]

New little end bearings? Got any pics?

[barneyszookin]

where is grecemere??

[Gonzo]

barneyszookin wrote:

where is grecemere??

Brisvagas !!

[Zook_Fan]

Gonzo wrote:

barneyszookin wrote:

where is grecemere??

Brisvagas !!

No it is 5 minutes outside of Rockvagas (Rockhampton)

[atari4x4]

want33s wrote:

New little end bearings? Got any pics?

x 2

[89_tintop]

if you decide to seperate i call dibs on the aircon set up in the sierra

[ZookiMonsta]

89_tintop wrote:

if you decide to seperate i call dibs on the aircon set up in the sierra

I'll sell mine for the right price.

[Zook_Fan]

if you do decide to split the cars from the engine i will be interested. I have no need for a 1.6 but could do with the other stuff

[royce]

want33s wrote:

New little end bearings? Got any pics?

atari4x4 wrote:

x 2

Getting a bit sick of the bullshit that goes on in this section from people that should know better, would hate to see this section go cause it pisses me off