[drovin]

which 02 sensor for my g16b, dissy model?? [93 vitara doner]. my wiring diagram clearly shows 4 wires, and the wiring loom also has 4. The problem is all the sellers are telling me its a 3wire sensor for a vitara. Can anyone shed some light on this for me please?

[steak_knife]

4th wire may not be used, I don't think thay run a heated O2 in the vit's..

[gregdixon]

The sellers are difficult to deal with if it is not on their wholesalers parts list it doesn't exist to them. I went to multiple car parts shops with an exact part number of my o2 sensor and they said it was the wrong part. After some hunting I found the exact part.


If there is a fourth wire it would be used. I doubt suzuki would waste money on extra wire if it is not used.

[BlueSuzy]

Wire costs 2cents not $200....

Have you seen how many spare plugs there is in a loom?

[steak_knife]

BlueSuzy wrote:

Wire costs 2cents not $200....

Have you seen how many spare plugs there is in a loom?

Yassss..

http://www.suzistore.com.au/shopexd.asp?id=1667

There is also single wire, & I have seen them go into a 4 pin connector....

[BlueSuzy]

I has a single wire for my Baleno coilpack motor. Goes into a 4 pin plug!

[drovin]

Thats all well and good , but i still dont know which 1 for my g16b dissy

[gravity_powered]

suzistore only list a single wire sensor for a 1.6

http://www.suzistore.com.au/shopexd.asp?id=1667

[steak_knife]

drovin wrote:

Thats all well and good , but i still dont know which 1 for my g16b dissy

How many wire's come out of the sensor, don't worry about the plug cause you could run it through a trailer plug as long as it had a good connection..

The sensor, how many wire's come out of it??

[drovin]

the vit motor i bought did'nt come with a sensor, so i'm triing to determine what to purchase, ie, 1 wire ,2 wire ,3 wire or a 4 wire, sensor. some how the trailer plug bit went through to the boundry.

[steak_knife]

drovin wrote:

the vit motor i bought did'nt come with a sensor, so i'm triing to determine what to purchase, ie, 1 wire ,2 wire ,3 wire or a 4 wire, sensor. some how the trailer plug bit went through to the boundry.

have a look at the sensor's, can you tell us the name of the manufacturer??

Mitsubishi, Denso?

As far as I know all the vit's are single wire, could be wrong tho, has happened before..

As for the trailer plug, the number of terminal's on a plug can have no relevance to the amount of wire's used on the sensor, even Ecu's have spare pin's out's...Hence the trailer plug..

[atari4x4]

my vit is a 4 wire stekko?

[steak_knife]

atari4x4 wrote:

my vit is a 4 wire stekko?

If it is it's heated, so on start up it still work's efficiently..