It is currently Fri Jul 24, 2026 2:11 pm
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 22 posts ] 
Author Message

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Sat Jul 03, 2010 2:51 am 
Reply with quote Top  
Vehicle
Selling AS IS
It's a December 1978 Suzuki LJ81k
Original drop side steel tray
It's a pre-Stockman model

The Good
It's an LJ, and a LWB at once!
Very original car, matching numbers engine (F8A)
All glass is good
Seats are pretty good
It runs (though the battery is flat, and the carby needs some love)
The tray bed is essentially rust free, the gates/sides have some rust though

The Bad
OK, it has rust, and one or two spots are bad.
The worst two spots are in the front right drivers guard, and in the tub above the drivers feet (I have taken photos of the rust)
The fuel tank was dinted, though I have straightened it, and its probably about 39 litres out of the original 40 now

The spares
I'm selling some spare parts with this car:
- rear diff housing, shafts, and a 4.5 centre to suit front or back
- Jackshaft
- Some spare CV's and swivel hubs
- Spare F8a short motor (rebuilt one, from my hardtop)
- Some random spare brake drum stuff (Will have a near new rebuilt set of front drums with new extended lines that any buyer can have with it, after I disc brake my hardtop in th next week or 2)
- Couple of spare F8 carbies
- Couple of spare dizzies and coils
- Spare seats, the frames are fecked, but the upholstery is OK

Note: Due to the rust in the guards being notable, I know someone who has a good pair of LJ81 front guards (not stockman ones, same as this car), that they will sell for $150; if they are of interest to a buyer.

Reason For Selling
Bought something else...
If I can't sell it, I might part it later in the year... (It might even have a baby with my hardtop or something)...

Price and location
I'm looking for $1600.ono for the car with the parts (not including those above mentioned guards)
I'm located near Ipswich, QLD, Australia
Car is not regoed, will require a trailer or something similar for pickup.

Contact info
PM me, you can reply to this thread if you want. I will be putting it up for sale in a few other places over the next few days.

Pictures

LJ81:
Image

Front on:
Image

Engine bay:
Image

Rust in guard:
Image

Rust in tub:
Image

Inside:
Image

dash:
Image

Good sills:
Image

Tray:
Image

Spare parts:
Image

Spare seats:
Image

_________________
Clearance Hole Technology :P


Last edited by Highway-Star on Fri Jul 30, 2010 11:23 pm, edited 1 time in total.
 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Sat Jul 03, 2010 4:01 am 
Reply with quote Top  
Phwoooaaarrhhh! I think I just came a little bit...

If I was closer and had money I would snap it up in a second.

 Profile  

Offline
User avatar

Joined: Tue Mar 09, 2010 10:30 pm
Posts: 1645
Location: Ipswich

Post Posted: Sat Jul 03, 2010 5:53 am 
Reply with quote Top  
So you got the other one eh??? Hahahaha.

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Sat Jul 03, 2010 5:57 am 
Reply with quote Top  
5ierra wrote:
So you got the other one eh??? Hahahaha.



Yep. It's nice!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :D :D :D
Still stripping it and rebuilding it though :roll: :lol:

_________________
Clearance Hole Technology :P

 Profile  

Offline
User avatar

Joined: Tue Mar 09, 2010 10:30 pm
Posts: 1645
Location: Ipswich

Post Posted: Sat Jul 03, 2010 11:55 am 
Reply with quote Top  
haha effing perfectionists, never happy :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Sat Jul 03, 2010 12:17 pm 
Reply with quote Top  
If this still aint sold in 4 weeks ( yeah right :roll: ) I'll give you my tax cheque :D

I need another zook like I need a hole in the head, but I just love the LJ utes :D

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Sat Jul 03, 2010 2:12 pm 
Reply with quote Top  
Fatzook wrote:
If this still aint sold in 4 weeks ( yeah right :roll: ) I'll give you my tax cheque :D

I need another zook like I need a hole in the head, but I just love the LJ utes :D



Yeah well, I didn't really need another one, but it was too good a car to turn down, hence my selling this one; as I'm trying to draw a hard line at 3 :lol:

_________________
Clearance Hole Technology :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Sat Jul 03, 2010 2:48 pm 
Reply with quote Top  
Highway-Star wrote:
Fatzook wrote:
If this still aint sold in 4 weeks ( yeah right :roll: ) I'll give you my tax cheque :D

I need another zook like I need a hole in the head, but I just love the LJ utes :D



Yeah well, I didn't really need another one, but it was too good a car to turn down, hence my selling this one; as I'm trying to draw a hard line at 3 :lol:


You're a better man than me :D I've currently got 3 sierras, a vit and went and looked at a Kizashi today :roll:

I might have to sell some shit too :cry:

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Sat Jul 03, 2010 8:46 pm 
Reply with quote Top  
Fatzook wrote:
Highway-Star wrote:
Fatzook wrote:
If this still aint sold in 4 weeks ( yeah right :roll: ) I'll give you my tax cheque :D

I need another zook like I need a hole in the head, but I just love the LJ utes :D



Yeah well, I didn't really need another one, but it was too good a car to turn down, hence my selling this one; as I'm trying to draw a hard line at 3 :lol:


You're a better man than me :D I've currently got 3 sierras, a vit and went and looked at a Kizashi today :roll:

I might have to sell some shit too :cry:


That is a very nice car, i would buy one if I was in the market for a luxury shopping trolley..

Your a temptress Mr Highway-Star.... 8O :P :P :evil: :P :roll: :evil: :P 8O

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Sat Jul 03, 2010 11:07 pm 
Reply with quote Top  
Kizashi = J24 = Awesome engine conversion for LJ or Sierra :D ....LOL

Steknig, I haven't seen any Tar on this one yet! :P :lol:

_________________
Clearance Hole Technology :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Post Posted: Sat Jul 03, 2010 11:50 pm 
Reply with quote Top  
Fatzook wrote:
Highway-Star wrote:
Fatzook wrote:
If this still aint sold in 4 weeks ( yeah right :roll: ) I'll give you my tax cheque :D

I need another zook like I need a hole in the head, but I just love the LJ utes :D



Yeah well, I didn't really need another one, but it was too good a car to turn down, hence my selling this one; as I'm trying to draw a hard line at 3 :lol:


You're a better man than me :D I've currently got 3 sierras, a vit and went and looked at a Kizashi today :roll:

I might have to sell some shit too :cry:


Those Kizashi's are good aren't they :D

If only this LJ was in Perth...

_________________
I want my old sig back :(

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Sun Jul 04, 2010 2:54 am 
Reply with quote Top  
Highway-Star wrote:
Kizashi = J24 = Awesome engine conversion for LJ or Sierra :D ....LOL

Steknig, I haven't seen any Tar on this one yet! :P :lol:


:P That make's it better!!! :P :P :P :P

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Sun Jul 25, 2010 6:27 am 
Reply with quote Top  
Bump...

_________________
Clearance Hole Technology :P

 Profile  

Offline
User avatar

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Post Posted: Sun Jul 25, 2010 7:10 am 
Reply with quote Top  
Swap ya for a roll bar or two? :wink: :roll:

_________________
Own a weird looking coily sh!tbox!

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Post Posted: Sun Jul 25, 2010 7:51 am 
Reply with quote Top  
I may have to come and sit in this thing. See if I fit :lol:

_________________
2013 GV
1998 SV420 ute

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Sun Jul 25, 2010 12:30 pm 
Reply with quote Top  
Too many cookies have addled your brain Cookimonster!.....ummm Zookimonster :lol:


Your welcome too Fatzook. PM me if you decide you want to :D

_________________
Clearance Hole Technology :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Post Posted: Sun Jul 25, 2010 10:39 pm 
Reply with quote Top  
you wont be any less comfortable in this as you are in the 1 litre ute Pete.

 Profile  

Offline

Joined: Tue Feb 09, 2010 10:30 pm
Posts: 58
Location: brisbane

Post Posted: Mon Jul 26, 2010 7:13 pm 
Reply with quote Top  
Hi, are you interested in a swap for a 84 model 1lt ute.

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Mon Jul 26, 2010 11:59 pm 
Reply with quote Top  
Wrinkledbits wrote:
Hi, are you interested in a swap for a 84 model 1lt ute.



Not interested in any swaps. Am only selling as I have too many vehicles, and not enough space.... Apparently 5 Suzukis and a parts LJ is too many :(

_________________
Clearance Hole Technology :P

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Post Posted: Tue Jul 27, 2010 7:02 am 
Reply with quote Top  
Highway-Star wrote:
Wrinkledbits wrote:
Hi, are you interested in a swap for a 84 model 1lt ute.



Not interested in any swaps. Am only selling as I have too many vehicles, and not enough space.... Apparently 5 Suzukis and a parts LJ is too many :(


:roll: Time to send the old's to a home!! :roll: :lol: :lol:

_________________
I used to be indecisive,
now I'm not so sure.....

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Tue Jul 27, 2010 7:15 am 
Reply with quote Top  
steknig wrote:
Highway-Star wrote:
Wrinkledbits wrote:
Hi, are you interested in a swap for a 84 model 1lt ute.



Not interested in any swaps. Am only selling as I have too many vehicles, and not enough space.... Apparently 5 Suzukis and a parts LJ is too many :(


:roll: Time to send the old's to a home!! :roll: :lol: :lol:



Ouch! :lol:

Was funny though, said to my old man this arvo that someone asked If I would be interested in swapping the 81 for a Sierra ute, and his eyes lit up..... He really loves Sierra utes :lol: ...... but as it is, he is undecided whether his current Sierra stays or goes. Anyway 81 is mine not his :P

_________________
Clearance Hole Technology :P

 Profile  

Offline
User avatar

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Post Posted: Fri Jul 30, 2010 11:22 pm 
Reply with quote Top  
SOLD

Pending payment and pickup

Some of the spare parts I was selling with the buyer does not require though (seats sold). So if people are interested in them PM me.

_________________
Clearance Hole Technology :P

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 78 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours