[parfittron]

Hey guys,
Had issues getting my Jimny to engage 4wd while up at double island over the weekend.

It's a push button transfer model, and when pushed you hear the vacuum lines trying to engage ok, the light for 4wd flashes once, then nothing.

I couldn't see any obvious issues with the vac lines and didn't get any error beeps.

Any ideas would be great..

Cheers

[vermin]

Check the solenoid wiring underneath the car on the transfer case - the wires are quite poorly exposed and are easily snapped.

This is what happened to me anyway.

[steak_knife]

Vacuum leak's don't throw a warning beep.

If the pump can't get pressure with in a specified time it shuts off.

[parfittron]

I will check the solenoid leads.

Steknig, any good ways to test whether its a vacuum issue then?