| Author |
Message |
sierra_666
Joined: Sat Feb 06, 2010 10:30 pm Posts: 194 Location: gold coast
|
 Posted: Mon Aug 02, 2010 5:20 am |
|
|
i had a whinge coming from what i thought was the rear diff, i changed diffs and the whinge is still there.
What could be causing this noise? it only really starts when i hit about 80kms and stop s when i back off.
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Mon Aug 02, 2010 5:29 am |
|
|
|
 |
weaves

az supporter
Joined: Fri Mar 21, 2008 10:30 pm Posts: 1564 Location: Newcastle
|
 Posted: Mon Aug 02, 2010 5:48 am |
|
|
what did the rear bearings look like when you removed the axles?
ball bearings often make a whine when they are on there way out.
_________________ I'm Weaver & i like beer, boobs, cars and stickers
|
|
|
|
 |
TZAR

az supporter
Joined: Tue Aug 01, 2006 11:30 pm Posts: 3461 Location: licking some windows
Vehicle: LJ20 LJ50
|
 Posted: Mon Aug 02, 2010 5:59 am |
|
|
punch your wife...... that should stop the whingeing
_________________ Camels have nice toes
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Mon Aug 02, 2010 6:01 am |
|
TZAR wrote: punch your wife...... that should stop the whingeing
Or increase it 10 fold lol
_________________ Bad decisions make good stories.
|
|
|
|
 |
matfan

az supporter
Joined: Sat May 29, 2010 4:27 pm Posts: 935 Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb
|
 Posted: Mon Aug 02, 2010 8:13 pm |
|
|
The noise may not be the diff. Have you had the car on a hoist (or stands) to hear the noise from the source. Quite often noises from the transfer/gearbox can sound like they're coming from the back.
When mine did that it turned out to be the hard casing on the pinion shaft.
_________________ JrZook - Mine only hangs 2.5".
|
|
|
|
 |
sierra_666
Joined: Sat Feb 06, 2010 10:30 pm Posts: 194 Location: gold coast
|
 Posted: Mon Aug 02, 2010 11:38 pm |
|
|
yeah wheels bearings where my next guess but they didn't look to bad when i pulled axels out,
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Tue Aug 03, 2010 12:06 am |
|
|
Mine was vibrating whining like a bitch.
Turned out to be the rear uni on ther tailshaft. She was seized..
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
sierra_666
Joined: Sat Feb 06, 2010 10:30 pm Posts: 194 Location: gold coast
|
 Posted: Tue Aug 03, 2010 2:36 am |
|
|
so best bet would be to take it to a mechanic then i suppose
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Tue Aug 03, 2010 2:41 am |
|
|
if your not able to do bearings your self, yes
|
|
|
|
 |
sierra_666
Joined: Sat Feb 06, 2010 10:30 pm Posts: 194 Location: gold coast
|
 Posted: Fri Aug 06, 2010 10:35 am |
|
|
the transfer case looks like its been leaking oil might that be part of the problem? should i check fluid?
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Fri Aug 06, 2010 11:10 am |
|
sierra_666 wrote: the transfer case looks like its been leaking oil might that be part of the problem? should i check fluid?
 Um, yes...
That mud hole you ploughed through will eat out seal's in EVERYTHING, checking oil level's should be part of your wash down..
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
sierra_666
Joined: Sat Feb 06, 2010 10:30 pm Posts: 194 Location: gold coast
|
 Posted: Fri Aug 06, 2010 11:26 am |
|
|
oh you saw that didn't you??? it was quite big wasn't it i thought i was going to need a snatch, i don't have a socket or spanner big enough for the transfer case. otherwise i would of.
|
|
|
|
 |
|