auszookers.com • View topic - Driveshaft spline

Board index » Talking About Stuff » Suzuki Talk

Driveshaft spline

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

Moph

az supporter

Joined: Sat May 19, 2007 11:30 pm
Posts: 2535
Location: Perth
Vehicle: 93 Sierra

Posted: Fri Aug 06, 2010 6:36 am

Am pulling my transfer tomorrow to fit a Roctoy ring and 2" JC transfer lift ... with the length of spline I have showing there, can anyone give me an idea what thickness (if any) driveshaft spacer I need?

About time I put the 2" mounts in ... though vice grips work impressively well!

finlay113

Joined: Wed Oct 21, 2009 10:30 pm
Posts: 477
Location: ballarat

Posted: Fri Aug 06, 2010 6:43 am

I've got a 10 mm snake racing spacer if that's what you end up needing. Let me know

Red89

Joined: Tue Jan 12, 2010 10:30 pm
Posts: 2801
Location: Perth

Posted: Fri Aug 06, 2010 8:29 am

Looks fine as is to me.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Aug 06, 2010 8:51 am

i run a 30mm spacer. Ruf, Dif is 25/30mm forward. 2'trans lift, but 1'or less lift in springs, spua.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Moph

az supporter

Joined: Sat May 19, 2007 11:30 pm
Posts: 2535
Location: Perth
Vehicle: 93 Sierra

Posted: Fri Aug 06, 2010 9:01 am

BlueSuzy wrote:

i run a 30mm spacer. Ruf, Dif is 25/30mm forward. 2'trans lift, but 1'or less lift in springs, spua.

Cool - that's about what mine is - RUF, front 1"ish forward, rear 0.5"ish back, 1"ish spring lift, soon-to-be 2" transfer lift. Will put the lift in then have a look at it again.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Aug 06, 2010 2:25 pm

my rear diff is only about 15mm rearward, so no spacer needed, and had no spline drama's other than the boot tearing on the chassis.. :lol:

I now fixed that by turning the shaft upside down, so now the tailshaft hits the chassis.. :lol:

_________________

BlueSuzy wrote:

I'm over the G16b's.

daisy

Joined: Tue Dec 30, 2008 10:30 pm
Posts: 285
Location: Redbank Plains, QLD

Posted: Fri Aug 06, 2010 7:18 pm

two of our zooks run them exactly like that with no spacers. seem to be fine.

Page 1 of 1

[ 7 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 776 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum