auszookers.com • View topic - is this asking for trouble

Board index » Talking About Stuff » Suzuki Talk

is this asking for trouble

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

benji

Joined: Sun Apr 04, 2010 11:30 pm
Posts: 266
Location: coffs harbour

Posted: Fri Aug 06, 2010 2:48 pm

the rule stops at 36" and the tyres are 28" would 31s fill the gap ???
or should i drop it a bit

You do not have the required permissions to view the files attached to this post.

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Aug 06, 2010 3:00 pm

31's will not fill the gap.. 1.5 inches bigger will do fark all.

What is your setup?

From what i can see,

Piss off those shackles with that 2-3" sus lift. They will do you no good! Flex worse than stock. I have done it with mine. Made it a stiff wheel lifting POS.

and 3-4" BL! WHY!??

With those tyres, you could run NO lift. With some small trimming only.

Your probably running at least 8" of lift there. Excluding tyre size/lift.

Your asking for BIG trouble!

_________________

BlueSuzy wrote:

I'm over the G16b's.

Last edited by BlueSuzy on Fri Aug 06, 2010 3:08 pm, edited 1 time in total.

benji

Joined: Sun Apr 04, 2010 11:30 pm
Posts: 266
Location: coffs harbour

Posted: Fri Aug 06, 2010 3:07 pm

3" and it was on the tub when i got it so ithought id use them they are threaded so they srew on to the studs in the tub and a prick to get off getting rid of the shackles would be a start though cheers

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri Aug 06, 2010 3:10 pm

1: Get rid of BL
2: Get rid of Shackles
3: Keep Spring lift.

_________________

BlueSuzy wrote:

I'm over the G16b's.

benji

Joined: Sun Apr 04, 2010 11:30 pm
Posts: 266
Location: coffs harbour

Posted: Fri Aug 06, 2010 3:23 pm

yeah i think i knew it was overboard but was after the easy way out, will have to go to work to get the oxy to try get them off with a bit of heat

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Aug 06, 2010 8:53 pm

BlueSuzy wrote:

1: Get rid of BL
2: Get rid of Shackles
3: Keep Spring lift.

No 1 & 2 X 2

_________________
I used to be indecisive,
now I'm not so sure.....

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Sat Aug 07, 2010 1:38 am

steknig wrote:

BlueSuzy wrote:

1: Get rid of BL
2: Get rid of Shackles
3: Keep Spring lift.

No 1 & 2 X 2

X more.

benji

Joined: Sun Apr 04, 2010 11:30 pm
Posts: 266
Location: coffs harbour

Posted: Sat Aug 07, 2010 2:31 am

but two inch would be acceptable ??? i need two get it up a bit to try and stop my gas tank from grounding out last time i dropped on it it shattered the floor around the mounts. do these springs look bigger to you guys they have suz002 on them but i wasnt sure if they are raised or not ????
cheers for the advise gentlemen

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Sat Aug 07, 2010 2:54 am

They look raised.

No height will stop you from hitting the tank. Thats what guards are for.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sat Aug 07, 2010 2:56 am

BlueSuzy wrote:

They look raised.

No height will stop you from hitting the tank. Thats what guards are for.

_________________
2013 GV
1998 SV420 ute

appsie

Joined: Sun Apr 20, 2008 11:30 pm
Posts: 2225

Posted: Sat Aug 07, 2010 6:58 am

hows that for free advertising :lol:

lose a heap of height mate,thats damn big.

and.........add one of these

benji

Joined: Sun Apr 04, 2010 11:30 pm
Posts: 266
Location: coffs harbour

Posted: Sat Aug 07, 2010 12:13 pm

already done dropped down to 1" , dont think my tank will fit in one of those, when i say gas tank i mean lpg

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sat Aug 07, 2010 12:35 pm

benji wrote:

already done dropped down to 1" , dont think my tank will fit in one of those, when i say gas tank i mean lpg

Give me the specs. I'll make one fit :wink:

_________________
2013 GV
1998 SV420 ute

benji

Joined: Sun Apr 04, 2010 11:30 pm
Posts: 266
Location: coffs harbour

Posted: Sat Aug 07, 2010 12:39 pm

cheers mate i'll measure it up tomorow

Page 1 of 1

[ 14 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 358 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum