auszookers.com • View topic - FS: 89 tin top $2000 engineered.

Board index » Shift It And Find It » Getting rid of stuff

FS: 89 tin top $2000 engineered.

Page 1 of 2

[ 38 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat Feb 27, 2010 8:29 pm

hey guy's im selling my 89 swb WT. sam is fully engineered for 31x10.5s, 50mm spring, 50mm Body lift. It has a welded front center, but ill supply a open one also if you want. Has bar work all the way round, all have been tested and proven tough. Has some of character dint's. The motor in this truck is good, needs a carby rebuild, but am trying to get that done before i sell it, so the longer you wait the more likely it will get done....

RTC, Rancho shocks, (the rear need replacing), and 6inch longer brake lines.

has run 33's in the past with no worries....

last dint's

Ill happily let it go for $2500. Needs a Tcase rebuild as i threw a spare in it and is pretty bad condition. The rear center needs to be reset properly by a shop to stop the whine, and the carby works but revs at 2K... i just want it gone, but if i get enough intrest ill wreck it out for parts

Last edited by 31zook on Sat Aug 07, 2010 10:54 pm, edited 3 times in total.

89_tintop

az supporter

Joined: Fri Aug 07, 2009 11:30 pm
Posts: 3159
Location: gold coast

Posted: Sat Feb 27, 2010 9:34 pm

so your saying good buy to zook land hey???

_________________
http://auszookers.com/index.php?name=Forums&file=v

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Feb 28, 2010 1:30 am

no, i have a project truck still... I just want a DD that i can put in drive and cruise...

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Sun Feb 28, 2010 1:51 am

I think I can see the Virgin Mary in your tyre tread in the first pic...

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Feb 28, 2010 1:33 pm

haha hmm maybe, should i charge more for that?

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Mar 22, 2010 6:08 pm

bump, my lwb will go for rego tomorrow

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun Jun 13, 2010 10:17 pm

bump price drop.

liv24b

Joined: Mon Apr 27, 2009 11:30 pm
Posts: 69
Location: sydney

Posted: Mon Jun 14, 2010 12:35 am

how much?

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Jun 14, 2010 3:36 am

$2500

Ratty562

Joined: Fri Apr 09, 2010 11:30 pm
Posts: 839
Location: NSW, Sydney

Posted: Mon Jun 14, 2010 8:08 am

hi
how much rego has it got

thanks

eldo

az supporter

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Posted: Mon Jun 14, 2010 9:15 am

josh i cant believe this has not sold.... what are you noobs doing, BUY IT FFS

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Mon Jun 14, 2010 9:16 am

eldo wrote:

josh i cant believe this has not sold.... what are you noobs doing, BUY IT FFS

X2!!!!!!

_________________
I used to be indecisive,
now I'm not so sure.....

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Jun 14, 2010 6:49 pm

till the end of september.

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Wed Aug 04, 2010 5:33 am

how about i sell it for 2K rego is 04-09-2010. will pass rego easy, just want it gone, open to offers...

weaves

az supporter

Joined: Fri Mar 21, 2008 10:30 pm
Posts: 1564
Location: Newcastle

Posted: Thu Aug 05, 2010 9:52 am

if you part this out, i call dibs of the front clip!

_________________
I'm Weaver & i like beer, boobs, cars and stickers

sleeperzook

Joined: Mon Jul 06, 2009 11:30 pm
Posts: 208
Location: Adelaide

Posted: Thu Aug 05, 2010 11:13 am

weaves wrote:

if you part this out, i call dibs of the front clip!

Keen for the 50mm springs if they're in decent condition!!

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Mon Aug 09, 2010 6:09 am

fair enough weaves, ill part out if this last bump don't get me a buyer...

nato78

az supporter

Joined: Fri Apr 09, 2010 11:30 pm
Posts: 1504
Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc

Posted: Mon Aug 09, 2010 6:38 pm

i'll take the front bar and sliders, and rear bar if its same tube as rest

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Mon Aug 09, 2010 9:18 pm

So is the tub rust free in the front section?

Would it suit a ute chop?

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Tue Aug 10, 2010 10:28 am

yep linc, it would, it has rear quarter damage, and a damaged sill, but if you are going to chop it up then i couple of ding's won't matter in the long run.

also it's rust free.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue Aug 10, 2010 12:23 pm

31zook wrote:

yep linc, it would, it has rear quarter damage, and a damaged sill, but if you are going to chop it up then i couple of ding's won't matter in the long run.

also it's rust free.

But if you want some rust, I have some you can have!!

_________________
I used to be indecisive,
now I'm not so sure.....

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Tue Aug 10, 2010 3:10 pm

I have some rust closer Linc!

_________________

BlueSuzy wrote:

I'm over the G16b's.

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Tue Aug 10, 2010 6:53 pm

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Tue Aug 10, 2010 11:50 pm

Please please don't chop it up!! Not enough decent tintops left now :cry:

lump_a_charcoal

az supporter

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Posted: Wed Aug 11, 2010 2:21 am

it isn't decent... Did you see the pics?

Jccck

Joined: Sun Apr 11, 2010 11:30 pm
Posts: 706

Posted: Wed Aug 11, 2010 4:43 am

I might just buy this, whole.. I will let you know tonight, ok

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Thu Aug 12, 2010 7:00 pm

you didn't buy it jccck.....

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Aug 12, 2010 8:38 pm

31zook wrote:

you didn't buy it jccck.....

I nearly did 12 month's ago..

_________________
I used to be indecisive,
now I'm not so sure.....

vacant

Joined: Thu Jul 22, 2010 7:22 am
Posts: 25
Location: Port Stephens

Posted: Thu Aug 12, 2010 8:44 pm

I'd be keen for a bl if you do part it. Possibly some bar work too

Chopz

Joined: Thu Nov 12, 2009 10:30 pm
Posts: 544
Location: Perth

Posted: Fri Aug 13, 2010 7:42 am

so you parting it out yet???

I'll take the dash cluster if ya are

Page 1 of 2

[ 38 posts ]

Go to page 1, 2 Next

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 78 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum