| Author |
Message |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Tue Aug 31, 2010 12:49 am |
|
|
I've got auto lockers front and rear with 31x10.5 MTRs on 15x7 F100 rims. I only managed to get 4 rims when I bought them and haven't chased up another since, so when I go bush I just take one (or two if I have the trailer) of my stock 15x5.5 rims with 205/70R15 HTs as spares. Not ideal but with some juggling of front and rear tyres it would get me out of trouble - but would be better if the spare more closely matched the running tyres.
What's a big, narrow, lightish tyre (HT/AT is fine) that I can fit to the 15x5.5 rims for a spare? Or alternatively, are there any really skinny 31's that could be fitted to 15x7 F100 rims? I'm wanting to put these on my trailer as well so I'd end up with 1 x spare on the car, 2 x trailer wheels and 1 x spare on trailer. That gives me 2 usable spares with the trailer still rolling, or 4 spares if I leave or skulldrag the trailer.
I have a hard top so with the increased lever arm between the hinges I'm somewhat confident that they'll take the weight of a light 31" HT/AT carcase and rim??
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Tue Aug 31, 2010 3:07 am |
|
|
The skinniest tyres i have seen are normally on toyo split rims. I think they are 16"s, LT tyres.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
TryHard
Joined: Thu May 13, 2010 1:49 am Posts: 1041 Location: Perth
|
 Posted: Tue Aug 31, 2010 6:04 am |
|
|
Moph this may sound stupid but if u wanta free rim and tyre and u live close to the pines go for a drive and u will most likely find what ur looking for
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Tue Aug 31, 2010 6:14 am |
|
a 265/75 = 30.5" - same as the 31" coopers... i'd look for a budget tyre in that kinda size... however, 235/85-16's are available in some brands, which means a more lightweight (skinnier) tyre - essentially a 31x9.25! =)
example: http://www.hankooktyre.com.au/Product/p ... &FnCode=01
_________________ 
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Tue Aug 31, 2010 6:20 am |
|
|
I'd run a 7.00X16 or a 7.50 16 on a 16X4.5 stock LJ/commercial sierra rim.
Quite a few guys in Vic do it.
For the amount a spare gets used it's not worth running anything better.
Steve.
|
|
|
|
 |
Moph

az supporter
Joined: Sat May 19, 2007 11:30 pm Posts: 2535 Location: Perth
Vehicle: 93 Sierra
|
 Posted: Tue Aug 31, 2010 7:10 am |
|
Gwagensteve wrote: I'd run a 7.00X16 or a 7.50 16 on a 16X4.5 stock LJ/commercial sierra rim.
Cool - that sounds the ticket. Wasn't aware that the LJ's and commercials were a narrower rim. Am I best going for a straight 7.00X16 HT (eg Bridgestone R200) on the trailer or is it worth having a bit of lateral grip? Given that they're non-driven I'm thinking smooth is the go?
|
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Tue Aug 31, 2010 7:23 am |
|
I carry a 205/65/15 in mine.even with 34's in planning on using it.
may look strange but ill get home 
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Tue Aug 31, 2010 7:24 am |
|
|
I'd use road pattern - less power required to pull it down the road.
Steve.
|
|
|
|
 |
matty_wall
Joined: Sun Feb 15, 2009 10:30 pm Posts: 989 Location: Blue Mountains
Vehicle: SJ51T
|
 Posted: Tue Aug 31, 2010 8:32 am |
|
Im running a 600-16 bar tread LJ rim as my space.. cost me $30  measures just under 30'
My door doesn't rattle any more either.
|
|
|
|
 |
|