auszookers.com • View topic - Diff gear swap Brisbane

Board index » Talking About Stuff » Suzuki Talk

Diff gear swap Brisbane

Page 1 of 1

[ 17 posts ]

Print view

Previous topic | Next topic

Author

Message

redzook91

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Posted: Fri Sep 17, 2010 12:22 pm

Right, alloy diff went south for the winter as I knew it would, now I need to get the 5.12's swapped from it into the steel one. Anyone know someone that they can refer me to to get that done? I got the original ones from the steelie pressed out at a place just behind archerfield airport but it was dear as poison. I'm hoping to get it done for around $40 or so but am i just being a cheap bastard?

Any help would be much appreciated.

Cheers,

Red

_________________
The LWB From 1993. Poetry in motion

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Sep 17, 2010 1:08 pm

$40

good luck

how much did they charge you to remove the one from the GV diff, expect to pay a lot more than that....

_________________
You're just hating because you don't understand

redzook91

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Posted: Fri Sep 17, 2010 1:12 pm

Cost me 60 but I thought that was a relative pricing thing. It seemed like a lot for just pressing out the pinion gear. Probably should go back to those guys then

What is the usual?

_________________
The LWB From 1993. Poetry in motion

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Sep 17, 2010 1:27 pm

setting up a diff isn't something to be taken lightly, considering ARB charge $330+ just to fit a locker without removing the pinion.

seeing you need the pinion fitted to the steel carrier, pinion depth set, then getting a good meshing pattern can take a while, then they need to set the backlash, new bearings would be the smart thing to do while its apart, i'd be budgeting alot more that $60... :wink:

_________________
You're just hating because you don't understand

redzook91

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Posted: Fri Sep 17, 2010 1:30 pm

shit. Oh well, may as well pay to get it done properly. Back to original question of who to do it... thanks for the info though Gus.

_________________
The LWB From 1993. Poetry in motion

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Sep 17, 2010 1:58 pm

my diff was done by a "diff specialist" & it was over $500 to build the steel diff up with the 5.12's with new bearings, seals & fit the locker.

EDIT: & the bloody thing still failed :twisted:

_________________
You're just hating because you don't understand

redzook91

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Posted: Sat Sep 18, 2010 10:43 am

Anybody? No? Dust?

_________________
The LWB From 1993. Poetry in motion

5ierra

Joined: Tue Mar 09, 2010 10:30 pm
Posts: 1645
Location: Ipswich

Posted: Mon Sep 20, 2010 1:19 am

I'm going to do some calling around today, i'll let you know how i got...

Difference being i'm supplying the parts.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Sep 20, 2010 1:29 am

5ierra wrote:

I'm going to do some calling around today, i'll let you know how i got...

Difference being i'm supplying the parts.

You have a PM

_________________
2013 GV
1998 SV420 ute

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Sep 20, 2010 1:31 am

redzook91 wrote:

Anybody? No? Dust?

PM'd

_________________
2013 GV
1998 SV420 ute

redzook91

Joined: Sun Apr 18, 2010 11:30 pm
Posts: 509
Location: Brisbane

Posted: Mon Sep 20, 2010 1:43 am

5ierra wrote:

I'm going to do some calling around today, i'll let you know how i got...

Difference being i'm supplying the parts.

Awesome....

Fatzook wrote:

redzook91 wrote:

Anybody? No? Dust?

PM'd

.....and Awesome

_________________
The LWB From 1993. Poetry in motion

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Mon Sep 20, 2010 1:58 am

i payed around 400 to get mine rebuilt.

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Sep 20, 2010 2:04 am

tanshi wrote:

i payed around 400 to get mine rebuilt.

I paid half that for 2 :wink:

_________________
2013 GV
1998 SV420 ute

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Mon Sep 20, 2010 2:16 am

mother F$%&*%&% hehe

tombutt

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 1917
Location: brisbane

Posted: Mon Sep 20, 2010 5:33 am

i paided zero dollars and zero cents actually that reminds me have to fix them up for the seal

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Sep 20, 2010 6:13 am

tombutt wrote:

i paided zero dollars and zero cents actually that reminds me have to fix them up for the seal

Pay peanuts, get monkeys. :roll:

_________________
2013 GV
1998 SV420 ute

tombutt

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 1917
Location: brisbane

Posted: Mon Sep 20, 2010 6:22 am

my diff is fine my mate did it for me he does them all the time at his work

Page 1 of 1

[ 17 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 60 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum