| Author |
Message |
Dyon-93
Joined: Thu Sep 30, 2010 2:27 am Posts: 5 Location: central coast
|
 Posted: Thu Sep 30, 2010 2:41 am |
|
|
Hi
I don't have any experience with car wiring, just seeing if anyone can tell me what each coloured wire job is on the adapter so i can put my new headunit in.
The car is an 02 jimny.
just making sure the black is for earth, red is for +12v power terminal which is energized in accessory position, and yellow is +12v power terminal
Last edited by Dyon-93 on Thu Sep 30, 2010 2:46 am, edited 1 time in total.
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Sep 30, 2010 2:43 am |
|
|
Test light?
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Thu Sep 30, 2010 2:48 am |
|
Dyon-93 wrote: Hi I don't have any experience with car wiring, just seeing if anyone can tell me what each coloured wire job is on the adapter so i can put my new headunit in. The car is an 02 jimny. just making sure the black is for earth, red is for +12v power terminal which is energized in accessory position, and yellow is +12v power terminal
On the head unit yes, but the car may be different color's..
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
Dyon-93
Joined: Thu Sep 30, 2010 2:27 am Posts: 5 Location: central coast
|
 Posted: Thu Sep 30, 2010 2:50 am |
|
|
cool cuase i was going to use the old head unit adapter becase the new one doesn't have a conection for the jimny
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Sep 30, 2010 2:59 am |
|
|
do you currently have an adaptor that plugs into teh stock jimny radio that then plugs into teh harness through another plug and the wire colours are red yellow black grey white purple green and maybe blue and orange?
if so it sounds like its the usual aftermarket head unit colours and matching colour for colour should be ok, if its not then your better getting it done for you
|
|
|
|
 |
Dyon-93
Joined: Thu Sep 30, 2010 2:27 am Posts: 5 Location: central coast
|
 Posted: Thu Sep 30, 2010 3:01 am |
|
|
yea they're all the colours, i was thinking of going through the adapter for the power and stuff and then using new lines for the speakers
|
|
|
|
 |
dm90
Joined: Sun Nov 29, 2009 10:30 pm Posts: 4349 Location: Perth
|
 Posted: Thu Sep 30, 2010 3:04 am |
|
|
when i did mine i couldnt find an adaptor that fit the back of my stereo and then into the car.
so i had to cut all the wires and solder them together, did colour for colour although they didnt match perfectly, but it all works now anyway.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Thu Sep 30, 2010 3:13 am |
|
|
I wouldnt bother with new speaker wires, not likely youd get any noticeable improvement
|
|
|
|
 |
Dyon-93
Joined: Thu Sep 30, 2010 2:27 am Posts: 5 Location: central coast
|
 Posted: Thu Sep 30, 2010 3:15 am |
|
|
i got it all in a pack, so i thought i might as well anyway
|
|
|
|
 |
Dyon-93
Joined: Thu Sep 30, 2010 2:27 am Posts: 5 Location: central coast
|
 Posted: Thu Sep 30, 2010 4:02 am |
|
|
ive got the stereo working, now all i have to do is install the speakers,
but that will have to wait until 2morro cause ive just been called into work
thank for all the help guys.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Thu Sep 30, 2010 4:05 am |
|
Dyon-93 wrote: i got it all in a pack, so i thought i might as well anyway
If it was in the box with the speaker's or head deck, don't bother, I can assure you the genuine wire is better..
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
|