[Scrawny]

I'm making a snorkel out of 3" exhaust for my Sierra. I need ideas for securing the pipe to the windscreen. Anyone got ideas/pics?

[GRPABT1]

Stainless hose clamps and screws?

[zook89]

i was thinking of making one with the same sort of idea but you can buy the snokel head from arb for 78bucks then just need 2 x 45 and 1 x 90 bends and some straight pipe weld it up and polish look a millon bucks

[Scrawny]

zook89 wrote:

i was thinking of making one with the same sort of idea but you can buy the snokel head from arb for 78bucks then just need 2 x 45 and 1 x 90 bends and some straight pipe weld it up and polish look a millon bucks

This was my plan, except I got 2x 90's. Cheaper than getting 3 bends. And I robbed a top from work so total cost- $0.
I just need ideas for fixing pipe to A pillar. Don't really wanna just do the self tapper thing if I can help it.

[steve]

you should be able to use the same holes as the standard radio antenna uses?

[Damo]

ScrawnC wrote:

zook89 wrote:

i was thinking of making one with the same sort of idea but you can buy the snokel head from arb for 78bucks then just need 2 x 45 and 1 x 90 bends and some straight pipe weld it up and polish look a millon bucks

This was my plan, except I got 2x 90's. Cheaper than getting 3 bends. And I robbed a top from work so total cost- $0.
I just need ideas for fixing pipe to A pillar. Don't really wanna just do the self tapper thing if I can help it.

Last one I did I used nutserts.

[Scrawny]

Damo wrote:

Last one I did I used nutserts.

Good idea! Didn't think of that. I was going to use the aerial holes but aren't they self tappers? May not be strong enough. I picked up the pipe yesterday and it's pretty heavy.... maybe too heavy? If I can mount it well enough it can be used as an exo too!!

[sp1086]

I got a snorkel head from Gibbs Truck Parts. Same as the Safari one but only $30