[samstaszuk]

Hey guys, whats everyones thought on snorkels?
What brands should i avoid or go for?

[rpmwrx]

Make one... Or get a good exhaust shop to fab you one up...

[ck13488]

+1 for exhaust shop jobby...even mild steel then prime/paint it

[samstaszuk]

How easy are they to make up?

[ck13488]

if your asking that question i would be getting an exhaust shop or mate with the required welding skills to do it

[alien]

90 degree bend from guard to outside, turn 90 degrees and make a 70 degree bend to follow up the window, then a 20 degree bend so the head sits upright... pretty easy - although i find the pipe snorkels to be hideous... just my opinion though =)

[samstaszuk]

so going for a store bought one isnt the option then?

[alien]

i think its your best and the best looking option - but its not the cheap one.

[Rusho]

If you don't like/can't weld you could always do mandrel bends with rubber slip joints This is my snorkel anyways, some ideas perhaps




It is 3 inch exhaust with mandrel bends(dont like the pipe benders at exhaust places ) powder coated. 90 degree bend from 3 inch down to 2 1/2 i think for the air box. Sorry about the picture quality, but you get the idea. I just wanted something different and follow the body lines. Airtec snork head to follow to finish it off. I didn't fabricate this either Compliments to Mr.Fat

[tombutt]

you didnt need to tell everyone that rusho yours would be made of electrical conduit if you made it

ive got a bought one and wouldnt bother agin just get one made

[tmb99]

I've got an airflow one I no longer need. If your keen pm me for details.