auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Door sill mould

Page 1 of 1

[ 15 posts ]

Print view

Previous topic | Next topic

Author

Message

ANNODAM

Joined: Sun Jul 09, 2006 11:30 pm
Posts: 89
Location: Melbourne

Posted: Fri Jul 28, 2006 5:11 pm

OK this is hard to describe.

The plastic black sill mould just below the drivers side door of my Vitara is up the shit & needs replacing. So I called around some places & found one but they tell me it comes in 3 sections & from looking at the sill mould from a distance it appears like it does. However, on closer inspection (under the car) it resembles (to me) to be one whole long piece bolted at either end with some plastic clips in the middle.

So my question is, are these people correct in saying there are 3 pieces?

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Fri Jul 28, 2006 6:20 pm

mine has a long centre section and then 2 little caps either end

I would say thats what they mean?

ANNODAM

Joined: Sun Jul 09, 2006 11:30 pm
Posts: 89
Location: Melbourne

Posted: Fri Jul 28, 2006 7:12 pm

Yes exactly like mine, but is it infact one piece or 3?

Maybe I should just piss off the shitty sill moulds & get side steps instead....

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Fri Jul 28, 2006 7:46 pm

thats my plan, the plastic just causes rust anyway

antt

Joined: Sat Jul 08, 2006 11:30 pm
Posts: 387

Posted: Fri Jul 28, 2006 11:52 pm

its 3 piece. i pulled the front most section off mine when i chopped the guards, to cut it to suit, then screwed it back on

ANNODAM

Joined: Sun Jul 09, 2006 11:30 pm
Posts: 89
Location: Melbourne

Posted: Sat Jul 29, 2006 1:56 pm

Right OK thanks!

If that's the case then, I only need 2 pieces.

_________________
Challenge me - If you dare!

http://annodam.mybr

Granta

Joined: Mon Aug 07, 2006 11:30 pm
Posts: 104
Location: Brisbane- Albany Cre

Posted: Wed Nov 22, 2006 10:55 pm

I bashed my sil a week or two ago 4x4ing, went around yesterday to get a few quotes to fix it, and ppl quoted me any where from 1600, to 700. But what im wondering is, could i just put some side steps on it and not even worry about the sill ???

Troll

Joined: Sun Jul 16, 2006 11:30 pm
Posts: 103
Location: Springwood/Qld

Posted: Wed Nov 22, 2006 11:04 pm

yeah just do it. can you still open and close the door?

_________________
84 lwb sierra, 30x9.5, 2 inch lift
http://www.aus

Granta

Joined: Mon Aug 07, 2006 11:30 pm
Posts: 104
Location: Brisbane- Albany Cre

Posted: Thu Nov 23, 2006 12:40 am

yea.
Any ideas on designe?

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Thu Nov 23, 2006 12:48 am

in my thread and westies theres a few :wink:

Granta

Joined: Mon Aug 07, 2006 11:30 pm
Posts: 104
Location: Brisbane- Albany Cre

Posted: Thu Nov 23, 2006 1:00 am

where can i find your thread ?

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Thu Nov 23, 2006 1:05 am

scroll through the introduce yourself section, in there somewhere

Granta

Joined: Mon Aug 07, 2006 11:30 pm
Posts: 104
Location: Brisbane- Albany Cre

Posted: Thu Nov 23, 2006 1:18 am

oh yea, there pretty nice. I like westies better sorry royce.

How do they go when the chasie is flexing ? and how long did they take to make and install ???

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Thu Nov 23, 2006 1:29 am

not built for looks, I'm used to a sill 20cm higher so made em to take a flogging

I did em over a week between other stuff but a big day would see em done, less if you do em like westies without the extra bar

chassis dont flex :wink:

Granta

Joined: Mon Aug 07, 2006 11:30 pm
Posts: 104
Location: Brisbane- Albany Cre

Posted: Thu Nov 23, 2006 1:45 am

Cheers

Also just testing your knowledge on the chassis

hehe

Page 1 of 1

[ 15 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 62 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum