auszookers.com • View topic - Even snorkles don't fit a coily.

Board index » Talking About Stuff » Suzuki Talk

Even snorkles don't fit a coily.

Page 1 of 1

[ 19 posts ]

Print view

Previous topic | Next topic

Author

Message

Lockie666

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1874
Location: Perth

Posted: Tue Nov 09, 2010 9:00 am

Hey, just got a snorkel for the coily, noticed that it's not going to fit properly as Safari intends. The indicator sits further towards the door, not where a normal WT indicator fits.

Where can I buy a snorkel that fits a coily

_________________
helloo

honks

Joined: Tue Apr 20, 2010 11:30 pm
Posts: 214
Location: ipswich

Posted: Tue Nov 09, 2010 9:12 am

why not just move the indicator cheaper than buying another snorkel and if you only move it a little bit there shouldn't be any holes visible(snorkel should cover them) and also it probably won't stand out as you cant look at both sides of the car at the same time

Lockie666

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1874
Location: Perth

Posted: Tue Nov 09, 2010 9:18 am

I work for ARB so I can just give it back to em, no questions asked. I've mesured it up and where the panel is sunk for the indicator to fit will still be showing... It'd look sort of dodgy

_________________
helloo

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Tue Nov 09, 2010 9:19 am

my snorkel hole went right over the standard indicator - i just dont have one on that side anymore.

just re-read your post... dang... other option is same brand as mine - airflow... theyre essentially a jeep cj7 i think snorkel, suzistore stock them.

_________________

vermin

az supporter

Joined: Mon Nov 02, 2009 10:30 pm
Posts: 1441
Location: Clarkson W.A.

Posted: Tue Nov 09, 2010 9:22 am

That sucks man - I would have thought that TJM would make something. That is who makes Jimny ones.

_________________
09 Jimny Sierra Limited Edition

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Tue Nov 09, 2010 9:25 am

pic mitch took of mine.

_________________

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Tue Nov 09, 2010 9:35 am

Get an old side indicator (the flat type) and fit it in, the snorkle should cover it over. I had the same problem with
my snorkle.

_________________
Own a weird looking coily sh!tbox!

Lockie666

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1874
Location: Perth

Posted: Tue Nov 09, 2010 10:15 am

ZookiMonsta wrote:

Get an old side indicator (the flat type) and fit it in, the snorkle should cover it over. I had the same problem with
my snorkle.

got any pics mate? What sort of indicator are we talking about?

_________________
helloo

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Tue Nov 09, 2010 10:17 am

Lockie666 wrote:

ZookiMonsta wrote:

Get an old side indicator (the flat type) and fit it in, the snorkle should cover it over. I had the same problem with
my snorkle.

got any pics mate? What sort of indicator are we talking about?

I will get some tomorrow, the old style flush mount type. They mount exact the same as the coily
ones, but they sit flush on the guard.

_________________
Own a weird looking coily sh!tbox!

bagnkat

az supporter

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 346
Location: Port Stephens.
Vehicle: SJ80

Posted: Tue Nov 09, 2010 12:43 pm

vermin wrote:

That sucks man - I would have thought that TJM would make something. That is who makes Jimny ones.

Airtec through TJM make a snorkel that fits the coily. I bought one but haven't yet fitted it. It runs along the top of the guard entering just forward of the wheel arch. It plumbs straight into the air box with minimal direction change. I bought mine from TJM because for the longest time I didn't think any existed, then some bloke at work was driving a coily with one... so I stalked him over the next month and identified it. :oops:

They fit really well and look really 'integrated' if that makes sense, but like anything for a coily, they're expensive.

You do not have the required permissions to view the files attached to this post.

dm90

Joined: Sun Nov 29, 2009 10:30 pm
Posts: 4349
Location: Perth

Posted: Tue Nov 09, 2010 1:13 pm

i love my tjm snorkel, where would i be with out it :roll:

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Tue Nov 09, 2010 9:17 pm

probably still in the warren river? lol

_________________

Proxy

az supporter

Joined: Wed Sep 22, 2010 3:06 am
Posts: 248
Location: Giralang, ACT
Vehicle: 1995 Suzuki Vitara JX LWB G16B

Posted: Tue Nov 09, 2010 9:24 pm

What about putting an indicator at the front like on mine

(it's tinted black)

_________________
89 Sierra (Crashed)
95 Vitara (Current)

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Tue Nov 09, 2010 9:53 pm

but then you lose the awesome suzuki badge on the front? =)

_________________

crewsy

az supporter

Joined: Wed Sep 29, 2010 12:41 pm
Posts: 579
Location: Perth

Posted: Wed Nov 10, 2010 1:04 am

Proxy wrote:

What about putting an indicator at the front like on mine

(it's tinted black)

That's what I've done on mine, but only on the drivers side.. just gotta put the snorkel on now haha

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Wed Nov 10, 2010 1:09 am

alien wrote:

hey alien, just wondering did it pass the engineering process with no side indicator on one side?

_________________
You're just hating because you don't understand

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Wed Nov 10, 2010 1:15 am

That style should fit int eh coily spot cause the recess is the same (thats what zookimonsta is getting at, otherwise get the blanking plate off a later one and fit it and stick a flush one onthe snorkel if you really want to run a light

jacko98

Joined: Mon Nov 15, 2010 9:49 am
Posts: 15
Location: Central Qld

Posted: Sun Nov 21, 2010 9:59 am

try dnaoffroad.com.au

You do not have the required permissions to view the files attached to this post.

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Sun Nov 21, 2010 10:47 am

atari4x4 wrote:

alien wrote:

hey alien, just wondering did it pass the engineering process with no side indicator on one side?

nar snorkel only came more recently... but its just a side marker, the front ones are what theyre worried about.

_________________

Page 1 of 1

[ 19 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 276 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum