| Author |
Message |
dellcharity
Joined: Tue Sep 21, 2010 1:23 am Posts: 15 Location: cairns
|
 Posted: Wed Nov 10, 2010 4:21 am |
|
|
i have F10A engine and 5 speed box been rebuilt but not used since have new clutch and bearings in box, have new carb to suit super carry etc, starter motor, alternator and other bits and pieces off super carry
engine $500
5 speed $300
new clutch to suit $100 still in box with bearings
carb $150 new
alternator $70
package deal $800 + freight
have pics can email
steve
0459340771
|
|
|
|
 |
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
 Posted: Wed Nov 10, 2010 6:18 am |
|
dellcharity wrote: i have F10A engine and 5 speed box been rebuilt but not used since have new clutch and bearings in box, have new carb to suit super carry etc, starter motor, alternator and other bits and pieces off super carry engine $500 5 speed $300 new clutch to suit $100 still in box with bearings carb $150 new alternator $70 package deal $800 + freight have pics can email steve 0459340771
So the gearbox came from a super carry too?
If so, I might be interested, though not for $300.
_________________ Clearance Hole Technology 
|
|
|
|
 |
lauby

az supporter
Joined: Sat Dec 05, 2009 10:30 pm Posts: 254 Location: Gold Coast
Vehicle: 91 Sierra
|
 Posted: Wed Nov 10, 2010 8:06 am |
|
|
i have a 1990 1l maruti. current engine status ' KNOCK KNOCK KNOCK ', any one know if the engine advertised above will bolt in ?
|
|
|
|
 |
mrw82

az supporter
Joined: Tue Jul 03, 2007 11:30 pm Posts: 1350 Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre
|
 Posted: Wed Nov 10, 2010 8:10 am |
|
|
the motor will but the intake manifold is different so you would have to use your original. same with engine mount brackets. not sure about the gearbox being any good for sierra though, (in an LJ it would be ok)
|
|
|
|
 |
303zuke

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 2447
Vehicle: LJ50V, SJ70
|
 Posted: Wed Nov 10, 2010 11:56 am |
|
mrw82 wrote: not sure about the gearbox being any good for sierra though, (in an LJ it would be ok)
No the Super Carry box won't work in an LJ80 because the bellhousing bolt pattern is rotated to lay the block at an angle. BUT, the rear case and selector shafts can be used with a Maruti/late 1.0 box to make a 5 speed that uses the LJ gear lever.
|
|
|
|
 |
dellcharity
Joined: Tue Sep 21, 2010 1:23 am Posts: 15 Location: cairns
|
 Posted: Thu Nov 11, 2010 11:02 pm |
|
lauby wrote: i have a 1990 1l maruti. current engine status ' KNOCK KNOCK KNOCK ', any one know if the engine advertised above will bolt in ?
make a reasonable offer and organise own freight and we will see if we can do business 
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Thu Nov 11, 2010 11:05 pm |
|
dellcharity wrote: Highway-Star wrote: dellcharity wrote: i have F10A engine and 5 speed box been rebuilt but not used since have new clutch and bearings in box, have new carb to suit super carry etc, starter motor, alternator and other bits and pieces off super carry engine $500 5 speed $300 new clutch to suit $100 still in box with bearings carb $150 new alternator $70 package deal $800 + freight have pics can email steve 0459340771 So the gearbox came from a super carry too? If so, I might be interested, though not for $300. make a reasonable offer and organise own freight and we will see if we can do business 
Fixed, makes more sense as lauby was asking if it will bolt in, not making offer, where as highway was.
|
|
|
|
 |
|