| Author |
Message |
gamerx
Joined: Thu Nov 04, 2010 9:22 am Posts: 10 Location: Mandurah, W.A.
|
 Posted: Thu Nov 11, 2010 10:37 am |
|
Hey, just picked it up on Tuesday
I have attached some images,and there are a few more in this TinyPic album:
http://tinypic.com/a/2iatz/2
I'm thinking of doing either tyres or lift first, what do you guys think?
And also anything else you would suggest i do, i would love to hear!
You do not have the required permissions to view the files attached to this post.
Last edited by gamerx on Thu Nov 11, 2010 10:47 am, edited 2 times in total.
|
|
|
|
 |
SilentKilla
Joined: Sat Feb 20, 2010 10:30 pm Posts: 35 Location: Perth, WA.
|
 Posted: Thu Nov 11, 2010 10:42 am |
|
|
We are going on possible rock and mud first up, i am trying to help him but im not sure which is better for a first mod in that situation?
Tyres for grip or a 2" susp lift for articulation (dips and rocks etc.)
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Thu Nov 11, 2010 10:45 am |
|
|
Best thing to do is take it wheeling on the sort of tracks you are likely to be using it on, and find out what its limitations are, then go from there!
_________________ I want my old sig back 
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu Nov 11, 2010 10:58 am |
|
Nice buy mate  and yeah do what Ben said just to see what you want/need
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
SilentKilla
Joined: Sat Feb 20, 2010 10:30 pm Posts: 35 Location: Perth, WA.
|
 Posted: Thu Nov 11, 2010 11:23 am |
|
|
Tyres would give grip and some lift at the same time, might that be the better option if you had to pick one?
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Thu Nov 11, 2010 11:29 am |
|
nice wheels & nice wheels
personally if you're going to take it off road as a stocker be very careful with under body clearance, eg crossmembers/sills & fuel tank as they're pretty much a low rider.
lift first then tyres.
oh yeah, this should be in the members section.
_________________ You're just hating because you don't understand
|
|
|
|
 |
SilentKilla
Joined: Sat Feb 20, 2010 10:30 pm Posts: 35 Location: Perth, WA.
|
 Posted: Thu Nov 11, 2010 1:08 pm |
|
|
so far i see his choices as 235/75r15 or 30X9.50R15LT with 2" lift?
Is there going to be a big price difference between the two?
I imagine the 30X9.50R15LT would require perhaps more hammer work?
We are heading down to Brunswick on the 20th, and we do a lot of beach work. I think it ends up a good mix of everything actually, sand mud and rock.
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Thu Nov 11, 2010 1:13 pm |
|
|
There really isn't much difference between a 30 and a 235...
I had 235s under a vit with no lift, and no scrubbing at all.
_________________ I want my old sig back 
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Thu Nov 11, 2010 3:15 pm |
|
Hi gamerx, nice buy, and a JLX, so it has all the bells and whistles...
So your down Mandurah way, i thought i was the only one in Mandurah, but there is another i know about now, he he...
Those tyres on it look like 60 profile, if you put 70 or 75 profile AT's or MT's on it will give you lift, i think i got 10 to 12mm extra height just with tyres...
Those road tyres will be all but useless in Mud, and if the rocks arnt like river wash pepples, they will rip thru the thin sidewalls, sand they would be ok... just...
In my opinion, you need some decent tyres first, especially if you want to go 4wheelin as it is...
Dont know if you know about it, but we are having a BIG Trip on the 28th Nov, nearly 40 Zooks coming along, you are welcome to come along, check it out here -
http://www.auszookers.com/index.php?nam ... ic&t=13402
|
|
|
|
 |
lordfury007
Joined: Mon Sep 28, 2009 11:30 pm Posts: 298 Location: Darwin, NT
|
 Posted: Thu Nov 11, 2010 8:13 pm |
|
|
Last time i was in mandurah, there was a good place for wheeling on the corner of thomas rd and rockingham road. The enterance was on thomas road, on the side closest to mandurah.
that was about 5 years ago, not sure if its been closed or not since then.
_________________ 1988 Suzuki Sierra (SJ50)
1.6L G16A (EFI) with Su
|
|
|
|
 |
Christian

az supporter
Joined: Wed Aug 19, 2009 11:30 pm Posts: 94 Location: Coolbellup WA
Vehicle: 2007 Suzuki Grand Vitara
|
 Posted: Thu Nov 11, 2010 9:22 pm |
|
lordfury007 wrote: Last time i was in mandurah, there was a good place for wheeling on the corner of thomas rd and rockingham road. The enterance was on thomas road, on the side closest to mandurah.
that was about 5 years ago, not sure if its been closed or not since then.
thats kwinana.. Mandurah is further south
always thought that was a moto spot due to the massive rocks blocking the entrance..
_________________ 2007 Suzuki GV 2.7ltr V6
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Nov 11, 2010 9:24 pm |
|
atari4x4 wrote: nice wheels & nice wheels 
x2
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
Joe

I live here!
Joined: Sat Jul 04, 2009 11:30 pm Posts: 49041 Location: Rockingham W.A
Vehicle: JB74
|
 Posted: Thu Nov 11, 2010 10:10 pm |
|
Christian wrote: lordfury007 wrote: Last time i was in mandurah, there was a good place for wheeling on the corner of thomas rd and rockingham road. The enterance was on thomas road, on the side closest to mandurah.
that was about 5 years ago, not sure if its been closed or not since then. thats kwinana.. Mandurah is further south always thought that was a moto spot due to the massive rocks blocking the entrance..
Yeah Kwinana offroad area, im pretty sure its only for bikes now but 4wds still go in there
_________________ Joe likes boobs ( . )( . ) ( ° )( ° )
|
|
|
|
 |
nato78

az supporter
Joined: Fri Apr 09, 2010 11:30 pm Posts: 1504 Location: Auckland, NZ
Vehicle: Yamaha scooter, 50cc
|
 Posted: Thu Nov 11, 2010 11:33 pm |
|
|
I would start with a 2in suspension lift, as this will let you fit bigger tyres first time, rather than getting new tyres, fitting suspension lift, and then deciding you want bigger tyres (this is inevitable)
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Fri Nov 12, 2010 7:29 am |
|
Joe wrote: Christian wrote: lordfury007 wrote: Last time i was in mandurah, there was a good place for wheeling on the corner of thomas rd and rockingham road. The enterance was on thomas road, on the side closest to mandurah.
that was about 5 years ago, not sure if its been closed or not since then. thats kwinana.. Mandurah is further south always thought that was a moto spot due to the massive rocks blocking the entrance.. Yeah Kwinana offroad area, im pretty sure its only for bikes now but 4wds still go in there
Have you been in there Joe ? if so whats it like... is there anyway you can check to see if it is a 4WD area, as i am sure a few of us would be interested in going there ! 
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Fri Nov 12, 2010 7:30 am |
|
nato78 wrote: I would start with a 2in suspension lift, as this will let you fit bigger tyres first time, rather than getting new tyres, fitting suspension lift, and then deciding you want bigger tyres (this is inevitable)
Yeah but he wants to go 4wheelin now, and it only has road tyres on it, they wont last very long... 
|
|
|
|
 |
shandy92

az supporter
Joined: Tue Nov 25, 2008 10:30 pm Posts: 5066 Location: perth, Australia
|
 Posted: Fri Nov 12, 2010 7:35 am |
|
mate, if i was to do it again i would put a 2" lift in and some 30"s. if you plan on going more than 235 (29") just dont waste ur money, get 30"s first time.
for me, i bought my car with 235's  but i want 30"s now, its a small difference so might as well just go straight to it.
Mitch
|
|
|
|
 |
squizzytaylor
Joined: Sat Sep 26, 2009 11:30 pm Posts: 381 Location: Bogged near Morisset
|
 Posted: Fri Nov 12, 2010 8:21 am |
|
|
I like it a lot, but that's primarily cos you didn't drive it up a homo milk crate on a fence paling to show off its awesome flex.
Welcome to AZ. Get amongst it and then decide what mods you need.
|
|
|
|
 |
SilentKilla
Joined: Sat Feb 20, 2010 10:30 pm Posts: 35 Location: Perth, WA.
|
 Posted: Sat Nov 13, 2010 1:59 am |
|
|
Me and him rang around but there's nothing in stock suspension wise next week.
He will either have to go like it is and give it a go, or whack some 30x9.5x15's on and hammer the scrubbies out that he can until the lift kit gets in (OME).
SuzukiStore has pedders shocks in stock... naaaahh i think he will wait for OME lol.
|
|
|
|
 |
SilentKilla
Joined: Sat Feb 20, 2010 10:30 pm Posts: 35 Location: Perth, WA.
|
 Posted: Sun Nov 14, 2010 2:03 am |
|
Me and Dom's rides at Whitehill this morning.
|
|
|
|
 |
RIKSTR

az supporter
Joined: Sun Apr 26, 2009 11:30 pm Posts: 1278 Location: Canberra
|
 Posted: Sun Nov 14, 2010 6:30 am |
|
|
you could get the calmini 3" cheap at the moment
|
|
|
|
 |
shandy92

az supporter
Joined: Tue Nov 25, 2008 10:30 pm Posts: 5066 Location: perth, Australia
|
 Posted: Sun Nov 14, 2010 8:17 am |
|
|
nice, that must of been around 6am, as the shadows look really long and the sun is up nice and early now. its a good time to fish.
|
|
|
|
 |
gamerx
Joined: Thu Nov 04, 2010 9:22 am Posts: 10 Location: Mandurah, W.A.
|
 Posted: Mon Nov 15, 2010 1:36 am |
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Mon Nov 15, 2010 12:57 pm |
|
|
|
 |
|