| Author |
Message |
dave07

az supporter
Joined: Wed Oct 07, 2009 10:30 pm Posts: 329 Location: Bunbury, WA
|
 Posted: Fri Nov 12, 2010 3:33 am |
|
|
Just changed my fuel pump and fuel filter Nevada car would turn over but wouldn't start has spark. But still won't start any suggestions on what it may be or how i can check the pump is pumping fuel?
_________________ Vitara JX 1.6, straight through 2 1/4" exhaust, 2.
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 3:34 am |
|
|
pull the output line off the pump.....
_________________ wheelin 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 3:35 am |
|
|
ohhh and try to start it. make sure u pull ur coil lead off too and point the output line to the ground..
_________________ wheelin 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 3:39 am |
|
|
did u check the pump before fitment???
_________________ wheelin 
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Fri Nov 12, 2010 3:51 am |
|
|
is the fuel pump pumping fuel, if not make sure you have that shaft/pin in place that moves the fuel pump arm. sorry if this is hard to understand
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Fri Nov 12, 2010 3:52 am |
|
zooky08 wrote: is the fuel pump pumping fuel, if not make sure you have that shaft/pin in place that moves the fuel pump arm. sorry if this is hard to understand
He doesn't know, he's asking us how to tell if its pumping 
_________________ I want my old sig back 
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Fri Nov 12, 2010 3:53 am |
|
Ben_Sierra wrote: zooky08 wrote: is the fuel pump pumping fuel, if not make sure you have that shaft/pin in place that moves the fuel pump arm. sorry if this is hard to understand He doesn't know, he's asking us how to tell if its pumping  woops my bad  well if he finds out its not pumping then check the pin
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Fri Nov 12, 2010 3:55 am |
|
is it carby or efi? Did you put the pump around the right way? What's a Nevada car?
yeah pull the line off and turn the key and see if it pumps out all over your engine. (maybe point it away ) 
|
|
|
|
 |
JrZook
Joined: Tue Aug 08, 2006 11:30 pm Posts: 5517 Location: Holland Park
Vehicle: Awesome!!
|
 Posted: Fri Nov 12, 2010 3:56 am |
|
steve wrote: yeah pull the line off and turn the key and see if it pumps out all over your engine. (maybe point it away ) 
If its not an EFI pump 
_________________ Lil Foot!
http://tiny.cc/gtsw1
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Fri Nov 12, 2010 3:57 am |
|
|
Its injected yeah?
stick a test light into teh power plug at teh tank end, youll need somebody to crank while you watch to see if you have power there (ecu only powers it while the engine is turning more or less)
if you have power you should be able to hear the pump whir if you stick your ear to teh tank, if you dont, start at the fuse and see if you can hear the relay clicking above the accelorator pedal
it will take a while to prime and get up to pressure but not long enough to think something is wrong
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 3:58 am |
|
|
the pins dont normally just fall out but you never know. btw the pin is in the head and will move out slightly etc etc. let us know how u go.
_________________ wheelin 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:00 am |
|
|
o could be efi too good point.... you will hear the pump priming also.... kick the tank too.....
_________________ wheelin 
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Fri Nov 12, 2010 4:00 am |
|
|
if its efi then theres no pin cos the pump is attach to the tank not the head?
_________________ 03 Jimny 30 km2s 75mm lift f&r locked winch
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:01 am |
|
|
agreeded
_________________ wheelin 
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Fri Nov 12, 2010 4:01 am |
|
JrZook wrote: If its not an EFI pump 
Why can't ya do that? 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:03 am |
|
|
too much pressure, you can but yeah not recommoded
_________________ wheelin 
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Fri Nov 12, 2010 4:05 am |
|
ahh is that all, well too late anyway 
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Fri Nov 12, 2010 4:06 am |
|
there is no ppressure if its jsut dribbling out a hose
anyway with injected you jsut pull the bung on teh front of the rail and let it spew all over the radiator 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:11 am |
|
|
so whats the go? any test tried? ?? got it started yet?
_________________ wheelin 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:12 am |
|
|
id say faulty pump or fitment error (fuse blow etc etc)
_________________ wheelin 
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Fri Nov 12, 2010 4:13 am |
|
I am aiming towards an electrical problem making the old pump stop to begin with 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:16 am |
|
|
good point... fuse, shit contacts on pump.. earth problem,
is the car standard engne ecu etc?
_________________ wheelin 
|
|
|
|
 |
zooky08

az supporter
Joined: Fri Nov 27, 2009 10:30 pm Posts: 3426 Location: imbil/gympie. qld
Vehicle: 03 Jimny
|
 Posted: Fri Nov 12, 2010 4:20 am |
|
or he has fixed it and has'nt told us, and is now out wheeling the crap out f his car 
|
|
|
|
 |
Pauly
Joined: Mon Aug 23, 2010 5:01 am Posts: 70 Location: ballina
|
 Posted: Fri Nov 12, 2010 4:23 am |
|
|
mmm bastard....
_________________ wheelin 
|
|
|
|
 |
dave07

az supporter
Joined: Wed Oct 07, 2009 10:30 pm Posts: 329 Location: Bunbury, WA
|
 Posted: Fri Nov 12, 2010 5:02 am |
|
|
Well fuses are all good but pump isn't whirling or anything must be electrical just has to figure out where the problem is
_________________ Vitara JX 1.6, straight through 2 1/4" exhaust, 2.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Fri Nov 12, 2010 5:09 am |
|
|
test light, check for power at the pump and work forward, the fuel pump relay might be the green plug, cant remember
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Fri Nov 12, 2010 5:15 am |
|
|
As royce said. Look for the fuel pump relay. I can't remember if it has the green plug or not, but it does have 2 or 3 pink wires leading into it.
If you can't here is clicking on and off to let the fuel pump prime, then something is amiss with the relay.
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
|