It is currently Thu Jul 30, 2026 2:15 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Sat Nov 13, 2010 8:08 pm 
Reply with quote Top  
Sorting out the last of my headlight wiring and the dog's breakfast it was.

My last big issue is the numpty has pulled the cable compltly out of the loom plug under the dash (the one with a dozen odd wires in it) I cant for the life of my get the pin thats in there out, regardless of which way I poke it.

Have any of you more experienced guys got good tricks to getting it out so I can keep my loom as stock as possible?

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Sat Nov 13, 2010 8:42 pm 
Reply with quote Top  
The terminal have a small locking tang that holds them into the block.
You need to push the tang down and then the terminal will come out.
I have a dental tool modified for this job but a very small flat screwdriver will work.
Image
Not the best pic but you can see the tang.

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Sun Nov 14, 2010 2:29 am 
Reply with quote Top  
thats what I thought. couldnt see it/snipe it loose for some reason.

Will give it another go later.

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Tue Nov 16, 2010 6:16 am 
Reply with quote Top  
still no love :( can't see said tang top or bottom of the pin so am just stabbing a little randomly with no luck.

have a small terminal driver the fits through the block so thats not the problem.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Tue Nov 16, 2010 6:22 am 
Reply with quote Top  
Post a pic of the terminal block..

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Tue Nov 16, 2010 6:23 am 
Reply with quote Top  
Best photo's I could get sorry.

Is the plug that the wires for the headlights come down from the column in an 87 NT sierra.

The previous owner butchered them to put in relays and ran it back into the factory loom. :roll:


You do not have the required permissions to view the files attached to this post.

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Wed Nov 17, 2010 7:26 am 
Reply with quote Top  
photo's now added

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Wed Nov 17, 2010 8:58 am 
Reply with quote Top  
Just push the tang down and pull them out... The male side of the connector with the female spades in it has the tangs on the spades.
The female side of the connector with the male spades has the tangs built in to the plastic housing.

Image
For these small ones I use a jewellery screwdriver.

Image
Insert far enough to depress the tang and then turn 90 degrees. Pull on the wire and it comes out.

Image
Wa lah!!!

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Wed Nov 17, 2010 9:08 am 
Reply with quote Top  
thanks, made it look easy!

will give it another go when I get a chance.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Post Posted: Wed Nov 17, 2010 9:08 am 
Reply with quote Top  
For the other side of the plug you do the same thing.

Image


Insert the screwdriver far enough to raise the plastic tang.
Image

Image

 Profile  

Offline
User avatar

Joined: Sat Apr 10, 2010 11:30 pm
Posts: 4895
Location: Northcote

Post Posted: Sat Nov 20, 2010 8:16 am 
Reply with quote Top  
So I ground the end of a jewelers screwdriver down...

and I now have working headlights. armsup.

royce, ship this thread off to "good tech" ??

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 262 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours