It is currently Thu Jul 30, 2026 2:53 pm
Board index » Talking About Stuff » Suzuki Talk

Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Print view

Previous topic | Next topic

Author Message
TryHard

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Tue Nov 16, 2010 12:06 am 
Reply with quote Top  
hey also sometimes when i dry turn i here a clicking kinda noise i think my wheel bearings need done but iv have never done wheel bearings before how hard are they to do ? thanks and what do i need and what involved .. i know i have to take my hub off etc ... thanks
 Profile  
BlueSuzy

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Tue Nov 16, 2010 12:09 am 
Reply with quote Top  
Clicking sounds like a cv.

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  
TryHard

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Tue Nov 16, 2010 12:13 am 
Reply with quote Top  
BlueSuzy wrote:
Clicking sounds like a cv.



should i do my wheel bearings at the same time ?

also do u think if they are clicking i should replace them ..how long do u think they can hang in there
 Profile  
shep

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Tue Nov 16, 2010 12:16 am 
Reply with quote Top  
no fix just replace. have a look here as there is a good write up from mud pig.
http://auszookers.com/index.php?name=Ne ... c=2&page=2

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
 Profile  
shep

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Tue Nov 16, 2010 12:17 am 
Reply with quote Top  
when the wheel bearings fail ya wheel will fall off so how far ya push it is up to you.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
 Profile  
TryHard

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Tue Nov 16, 2010 12:18 am 
Reply with quote Top  
shep wrote:
when the wheel bearings fail ya wheel will fall off so how far ya push it is up to you.


yer iv seen a wheel fall off lol not good at all
 Profile  
TryHard

Offline
User avatar

Joined: Thu May 13, 2010 1:49 am
Posts: 1041
Location: Perth

Post Posted: Tue Nov 16, 2010 12:22 am 
Reply with quote Top  
shep wrote:
no fix just replace. have a look here as there is a good write up from mud pig.
http://auszookers.com/index.php?name=Ne ... c=2&page=2


perfect link thanks very much :)
 Profile  
shep

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Tue Nov 16, 2010 12:25 am 
Reply with quote Top  
TryHard wrote:
shep wrote:
no fix just replace. have a look here as there is a good write up from mud pig.
http://auszookers.com/index.php?name=Ne ... c=2&page=2


perfect link thanks very much :)


no worries. there is a fair bit of stuff in the tech articles. :wink: :D

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
 Profile  
Hybrid

Offline
az supporter
az supporter

Joined: Mon Apr 21, 2008 11:30 pm
Posts: 1095
Location: Bulimba, Brisbane
Vehicle: '92 Sierra

Post Posted: Tue Nov 16, 2010 12:46 am 
Reply with quote Top  
With only a slight thread derailment, what size in the socket needed for the wheel bearing nut? I'm sick of using my hand made socket.
 Profile  
Damo

Offline
az supporter
az supporter
User avatar

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Post Posted: Tue Nov 16, 2010 12:49 am 
Reply with quote Top  
Hybrid wrote:
With only a slight thread derailment, what size in the socket needed for the wheel bearing nut? I'm sick of using my hand made socket.


50mm from memory. The one I have is a 3/4" drive so you need to use a 3/4" -> 1/2" drive adapter so You can get it on the torque wrench. Works fine though.

_________________
SJ50.4.LYF
 Profile  
shep

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Tue Nov 16, 2010 1:13 am 
Reply with quote Top  
yeah 50mm. i have a 1/2" drive lowrange jobbie.

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
 Profile  
Hybrid

Offline
az supporter
az supporter

Joined: Mon Apr 21, 2008 11:30 pm
Posts: 1095
Location: Bulimba, Brisbane
Vehicle: '92 Sierra

Post Posted: Tue Nov 16, 2010 1:40 am 
Reply with quote Top  
Cool. Glenfords had some bigger than that the other day. Same deal with 3/8" drive though. Might compare the diff in cost to lowrange.
 Profile  
shep

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Tue Nov 16, 2010 2:19 am 
Reply with quote Top  
ya need a deepish socket as well

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Jump to:  


Who is online

Users browsing this forum: Google [Bot] and 261 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
cron
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours

Advertisements by Advertisement Management

Advertisements by Advertisement Management